Functions:
– Cleans
– Degrease
– Work in the holds, engines, mechanical parts.
Features:
– Emulsifying
– Treats mineral deposits, crude or refined oil residues, oils, mud in the bilge, on engines etc.
Direction for use:
1. Diluted from 20 to 30% in water.
2. Spray or apply the mixture with a brush on the surface to be cleaned.
3. Leave on for 10 minutes.
4. Rinse thoroughly with clean water.
Recommended thinner: LS701
Recommended thinner: LS701
One-pack high quality enamel
Theoretical coverage (m²/ LT): 13,5
Recommended thinner: 6470
Recommended thinner: LS701
2 in 1: Application pure gel or liquid dilution:
Functions:
– Deoxidized and removes rust stains.
– Removes yellow stain.
– Does not damage the gelcoat.
Features:
– Work on plastics, gelcoat, painted surfaces and metals
*New code: CA622
Clinazur 122 Black Water Treatment are tablets containing beneficial micro-organisms and enzymes. Gets rid very quickly of bad odours and accelerates the biodegradation of organic material in the
black water tanks. Its regular use will maintain the biological balance of the tanks and/ or septic tanks.
*Packaging contains 24 tablets.
Directions for use:
Technical data sheet (TDS):
*New code: CA636
Grey water treatment is a concentrated liquid formulation containing a mixture of micro-organisms, for treatment of grey water tanks. Curative use to degrade oil, animal and vegetable fat and to eliminate bad odours. Regular preventive use to reduce the use of hazardous chemicals and bad smells.
Directions for use:
Technical data sheet (TDS):
Recommended thinner: LS745
A high quality enamel with excellent resistance to marine and industrial environment, to ageing and to ultraviolet rays.
Does not yellow, is very flexible and retains its gloss. Excellent levelling gives improved aesthetic appearance to topsides, decks, superstructures etc. Gel Gloss Pro can be applied directly to gel coats or to epoxy or polyurethane primers (Epoply,Polygoal).
A wide range of colours, which can be blended, is available.
Not suitable for continuous water immersion.
Theoretical coverage (m²/ LT): 13,5
Recommended thinner: 6700 / 6780
For more information please visit Veneziani’s website.
Technical data sheet (TDS):
Technical data sheet (TDS):
Designed to provide top lubrication with less smoke and high protection against oxidation thus increasing engine efficiency.
Premium oil for 2-stroke marine engines for pre-mix and oil injection.
Premium oil for 2-stroke marine engines for pre-mix and oil injection.
Quicksilver Optimax / DFI Oil 4Ltr – Two stroke oil, formulated to cope with higher operating temperatures and reduced oiling rates of Direct Fuel Injection outboards. Increased lubricity minimizes carbon deposits and reduces smoke, protecting your engine at all times.
Continued use of this oil will:
Recommended for use in direct injection two-cycle engines such as Mercury Optimax.
Deep cleans teak and exotic woods. Removes the tasks and degreased. Alkaline detergent.
Functions:
– Renovates and brightens teak.
– Brings a radiant sandy color.
Features:
– Acide solution.
– Use after Clinazur 200 Teak cleaner.
Direction for use :
1. Use diluted from 30 to 40% in water.
2. Apply the mixture with a brush on the wet wood and in the direction perpendicular to the fibers.
3. Leave on from 5 to 10 min.
4. Rinse thoroughly with clean water.
*New code: CA917
Functions:
– Removes stains, light scratches, restores original colour and shine.
– For fiberglass, gelcoat, stainless steel and painted surfaces.
Features:
– Coarse rubbing compound.
– Silicon and PTFE free.
Direction for use:
1. Spread a small amount of 204 with a clean wet sponge.
2. Rub with a dry cloth to remove all traces.
1. Use a polisher for important surfaces.
2. Low speed is recommended.
205 SI is a highly concentrated alkaline detergent. It ensures efficient cleaning of painted surfaces, plastics, stainless steel, wood and metals without danger to the surfaces.
It quickly removes static film, dirt and salt deposits. Its concentration allows regular use with a low dosage. Formulated without phosphates and its concentration allows regular use at low dosage.
Functions :
– Cleans
– Protects
– Brings a glossy finish with no stains.
– Leaves a water repellent film.
Features :
– For gelcoat, painted surfaces and varnished.
– Green apple scent.
Direction for use :
1. Dilute 3/7 % in water.
2. Wet the surface and apply the mixture with a soft brush.
3. Leave for a few minutes.
4. Rinse thoroughly with clean water.
Functions:
– Cleans and removes salt, dirt and black stains.
Features:
– Based on vegetal solvants.
– Excellent results without altering the rubber.
Direction for use :
1. Use pure.
2. Apply the product on the surface to be cleaned with a clean cloth or sponge.
3. Insist rubbing the toughest tracks.
4. Rinse thoroughly with clean water.
5. Dry with soft, dry cloth.
Technical data sheet:
Functions :
– Cleans and removes salt, dirt and crime.
– For all non skid deck, covers and vinyl.
Features :
– Concentrated formulation.
Direction for use :
1. Dilute to 10% in water.
2. Apply the mixture with a medium or hard brush on the surface to be cleaned.
3. Leave for a few minutes.
4. Rinse thoroughly with clean water.