Pu adhesive D4 category.
H κόλλα Carmyfix CM-233 είναι κατάλληλη για φουσκωτά από Hypalon & Neopren. Ισχυρή διάφανη κόλλα νεοπρενίου (ψυχρής κόλλησης), με βάση συνθετικό λάστιχο (νεοπρένιο) και συνθετικές ρητίνες. Είναι κατάλληλη για την συγκόλληση δέρματος, υφάσματος, ελαστικού, EVA και φυσικού ελαστικού. Κατάλληλη και για συγκολλήσεις υφασμάτων φουσκωτών σκαφών (υφάσματα neoprene & hypalon).
Η προσθήκη του σκληρυντικού Carmydur (3-5%) αυξάνει την συγκολλητική ισχύ και την αντίσταση στην θερμότητα. Χάρη στα ειδικά χημικά η στεγνή κόλλα παρουσιάζει εξαιρετική αντοχή στο κιτρίνισμα από τον ήλιο. Η τελική σκλήρυνση γίνεται σε θερμοκρασία δωματίου.
H μέγιστη δυνατή συγκόλληση επιτυγχάνεται μετά από 48 ώρες.
Technical data sheet (TDS):
A structural adhesive designed for general purpose bonding of a wide variety of material such as hard and soft plastics to specified surfaces. Forms a tough, durable bond to most plastics, composites, ceramics, wood in any combination.
Fast curing product with gelling of mixed adhesive in 5-6 minutes and fixturing in 9-10 minutes.
NOTE: Will not bond most polyethylene or polypropylene plastics.
Bonds hard and soft plastics to specified surfaces. Requires no primers, sets in five minutes at room temperature. Cream appearance. Gap filling to 0.125 inch.
Water resistant and good chemical resistance.
Temperature range -51°C to 121°C. Permanent strength up to 3500 PSI.
Transparent hardener suitable for CM 233 and CM 888 adhesives. It is added in a ratio of 3-5% to polyurethane and polychloroprene adhesives.
Increases the resistance of the adhesive to temperature, resistance to solvents and the strength of the weld.
High quality rubber adhesive. Ideal for very strong welding. Resistant to humidity and high temperatures.
Surfaces must be clean and dry. Shake well before use. Apply well evenly on surfaces.
High temp red gasket maker was formulated to handle heavy duty applications and extreme temperature conditions (-54°C to 343°C)
Not recommended for use on head gaskets or parts in contact with gasoline.
3M™ Industrial Adhesive 4799 delivers a tough bonding solution that provides resistance to both heat and water.
Cyanoacrylic instant glue, a product of Henkel®
Sticks to rubber, leather, wood, porcelain, paper, plastic except PE, PP, PTFE.
Steel weld is a versatile, easy-to-use, multi-metal adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in four minutes, no clamping needed.
Adhesive will not bond most polyethylene or polypropylene plastics.
TIKAL TEF-GEL which is produced in Germany by TIKAL MARINE SYSTEMS, is a watertight, PTFE-based paste which can be used universally.
It prevents metal from blooming and protects reliably against corrosion by means of galvanic currents between different types of metal.
TIKAL TEF-GEL can also be used as a seawater-resistant lubricant and for sealing purposes to prevent water from penetrating.
Always use your screws and bolts with Tikal Tef-Gel®, and everything can be easily taken apart again even after intensive use in seawater. The same applies to the protection of turnbuckles against rusting. Tikal Tef-Gel® is used in the boat industry, automotive industry, in aviation and aerospace and wherever parts have to be protected from corrosion.
Safety Data Sheet (SDT):
DB Woodfix PU D4 is used as a water-resistant adhesive for applications in contact with water and moisture for long periods of time.
Suitable for outdoor applications as long as it is covered with paint to protect against UV rays.
Shelf life: In the closed original packaging between +5°C and +25°C, or up to 12 months from the date of production, stored in a dry place.
Pattex Power Epoxy is a fast setting, gap filling, two part adhesive which produces rigid bonds with high bond strengths. The glue line is resistant to water, fuels, grease and diluted acids and alkali.
Pattex Epoxy can be used to bond the following:
The bond formed can be cut, sanded or planed when fully cured.
Technical data sheet (TDS)
General purpose rubber adhesive suitable for bonding leather goods, furniture, paper, cardboard, felt, rubber, MDF, carpets, plastic tiles, etc.
Resistant to humidity and high temperatures.
Teflon thread sealant “FORTUB” is a sealant for screw joints and is impermeable to water, liquids and air.
WIKO 02K43 is a medium-strength, DVGW certified and universal threadlocker for fastening and sealing metal materials.
Weatherstip adhesive bonds rubber to metal. It can be used to attach various tires, rubber sheets, felt, canvas and other lightweight materials to many metals, wood, cement and plastics. It dries giving a flexible bond with water resistance.
Strong water resistant wood glue for very fast and strong welding.
Transparent after drying.
For all woodworking.
Suitable for external window frames, bathroom furniture, kitchen etc.