Sika

Showing all 6 results

291i SIKA Multifunctional adhesive sealant for marine applications

 

Sikaflex®-291i is a non-sag 1-component polyurethane sealant specifically developed for the marine market, which cures on exposure to atmospheric moisture. Sikaflex®-291i meets in addition the low spread of flame requirements set out by the International Maritime Organisation (IMO).

  • Wheelmark approved
  • 1-component formulation
  • Highly elastic
  • Low odour
  • Non-corrosive
  • Can be painted
  • Bonds well to a wide variety of marine substrates
  • Solvent free
  • Very low VOC
  • Low isocyanate content

Adhesive sealant 291i SIKA

 

Sikaflex®-291i is a non-sag 1-component polyurethane sealant specifically developed for
the marine market, which cures on exposure
to atmospheric moisture.

  • 1-component formulation
  • Highly elastic
  • Low odour
  • Non-corrosive
  • Can be painted
  • Bonds well to a wide variety of marine substrates
  • Solvent free

Technical data sheet (TDS)

Glass bonding SG-20 UV SIKA

Sikasil® SG-20 is a 1-component, neutral-curing structural glazing silicone adhesive, which combines mechanical strength with high elongation.

It is complying with EOTA ETAG 002 and provided with the CE-mark.

It adheres excellent to a wide range of substrates.

Technical data sheet (TDS):

Primer 290 (Deck Caulk) SIKA

 

Sika® Primer-290 DC is a solvent-based colorless to slightly yellow primer, which reacts with moisture and forms a thin layer.

This layer acts as a link between substrates and adhesive/sealant. Sika® Primer-290 DC is specifically formulated for the treatment of timber decking strips prior to caulking with Sikaflex®-290 DC or bonding with Sikaflex®-298.

Ideal application and surface temperature are between 15 °C and 25 °C.

Sikaflex 292i white Sika

 

 

Sikaflex®-292i is a non-sag 1-component polyurethane adhesive of thixotropic, paste-like consistency which cures on exposure to atmospheric moisture.

It exhibits excellent adhesive properties and a good mechanical strength.

It is suitable for structural joints in marine constructions which will be subjected to high dynamic stresses. It is suitable to bond metals, particularly aluminum (including anodized finishes), metal primers and paint coatings (2-component systems), or ceramic materials, plastics such as GRP (unsaturated polyester resin), ABS, etc.

Surfaces must be clean, dry and free from grease, oil and dust.

Service temperature: from -50 up to 90°C

 

Safety Data Sheet(SDS):

Sikaflex 295 UV Exterior sealant & direct glazing adhesive

 

Sikaflex®-295 UV is a 1-component polyurethane adhesive of paste-like consistency that cures on exposure to atmospheric moisture. It is suitable for interior and exterior sealing applications and to bond organic glass in the Marine business. Sikaflex®-295 UV meets the requirements set out by the International Maritime Organization (IMO).

  • Excellent application properties
  • Resistant to ageing and weathering
  • Suitable for organic glasses
  • Approved for the OEM market
  • Wheelmark approved

Technical data sheet:

Showing all 6 results

X