An epoxy filler of the latest generation, formulated to provide homogeneous consistency and avoidance of air bubbles during application. Epomast Evo is easy to apply and to sand and – after curing – provides excellent mechanical properties such as flexibility and good resistance to compression. Suitable for application on boats made of steel, aluminium, GRP and wood.
Epomast Evo can be used also for levelling deeper surface defects, when applied with several passes. Suitable for filling both areas above and below the waterline. Can be used also – owing to its creamy consistency and fine grain – as a knifing filler for the application of finishing paints..
Theoretical coverage (m²/ LT): 1
For further information please visit Veneziani’s website.
Technical data sheet (TDS)
Extremely easy to use 2 components epoxy putty of high resistance to temperature and humidity.
High-strength two-pack epoxy filler with great mechanical resistence. Excellent adherence to any type of surface and to epoxy primers. Highly resistant to water.
Epomast can be used to make joints and can be used to repair heavily damaged surfaces.
Thicknesses of up to 10mm can be reconstructed using a spatula and Epomast can be applied directly to wood, GRP, previously disc-ground steel and aluminum.
Theoretical coverage (m²/ LT): 1
For more information please visit Veneziani’s website.
Technical data sheet (TDS):
2-component moldable putties presented in a stick, which react when mixed.
Indicated to repair, rebuild, fill, fix and seal all kinds of materials permanently.
It is a super resistant glue putty indicated for fixing, sealing, filling, creating and rebuilding a multitude of materials and home repairs.
It is easy to mold, it hardens like steel, creating super resistant surfaces. Once hardened, it can be sanded, polished, painted and varnished.
Heat resistant up to + 120ºC.
Fiberglass putty for the filling of small holes and repair of rusty spots. Especially suitable for repair of boats and caravans made out of polyester.
Works as a filler, adhesive and sealant all in one application. Fast curing, elastic and heat resistant. Overpaintable with all usual coating systems.
Has unique filling properties, which allow it to be applied in thick layers for repairs of deep damages and even rust-through spots.
Two-pack, fast drying, high resistance epoxy filler designed for final profiling and small repairs. Can be applied up to a thickness of 1 cm with one single-pass. Epomast Rapido can be applied to any kind of substrate after the application of a suitable primer.
Can be applied onto Epomast Pro or to suitable epoxy undercoats both on below and above waterline areas. For best results, prior to the application of a topcoat, a suitable barriercoat or undercoat are recommended.
Easy to sand in a short time, both dry and wet conditions.
Theoretical coverage (m²/ LT): 1
For more information please visit Veneziani’s website.
Technical data sheet (TDS):
Restores original surface finish to boat hulls and glassfibre panels.
Repairs:
Surfaces:
Once set hard is waterproof and may be overpainted if required.
Ηigh-resistanc two component white gel coat filler.
Can be used like a regular filler to be knifed out: the final result is a bright white finish restoring the original chipped, scratched or dented gelcoat surface.
It can be coated.
Repairs Plastimo GRP Paste
Two-part, glassfibre reinforced polyester paste. Suitable for repairing holes and gaps, deep gouges in glassfibre,aluminium,steel and wood.
Can also be used on corroded iron sheets.
Two-component polyester putty.
Fine finishin putty for use in all vehicles and boats.
Suitable for use in thin layers. For finishin works on small surface damages and scraches.
Easy sanding.
Stucco Velox is generally used for final smoothing as part of one-pack systems used on topsides and superstructure with a maximum thickness of one millimetre per coat. It should not be used in systems subject to continuous or intermittent immersion in water.
Application in thicknesses of more than one millimetre can cause cracking in one-pack systems used for topsides and superstructures. Stucco Velox can be painted over with alkyd undercoats and finishes such as Eurogel, Italia and Unigloss.
For more information please visit Veneziani”s website.
Technical data sheet (TDS)
A pure epoxy compound, 100% solids by volume, which can remove water from the surface to be treated,providing excellent adhesion even on wet surfaces. Particularly useful for temporary repairs of leaks and cracks in the boat when it is in the water or moving.
Subcoat S adheres easily to GRP, gel coats, old epoxies, epoxy tar as well as steel and concrete. It is suitable for temporary repairs on sea chests, boot topping and submerged parts of cement quays. It is resistant to temperatures up to 100°C.
For more information please visit Veneziani’s website.
Technical data sheet (TDS)