Specific use

Showing all 8 results

Bilge paint Epifanes

 

Epifanes Bilge paint is a protecting paint based on modified alkyd resin for use in bilge spaces, engine rooms, etc. where a tough paint system is required. Can be applied over most substrates with one-component primer systems.

Application:

  • Fiberglass, steel, wood, aluminum
  • Bilges, chain lockers and other wet areas in conjunction with the appropriate primer system

 

Recommended thinner: Brush thinner for Paint & Varnish Epifanes (SKU: 39-0050, 39-0051)

Theoretical coverage 3-5m²/750ml

Ceramite Yachting


A high-build, odourless epoxy paint which is solvent-free for the internal and external treatment of any surfaces which need to be sealed, such as water tanks, galleys and cool boxes. Used in antiosmosis systems as a sealant for bilge, fore and aft peaks and hidden internal surfaces.

This product is also suitable for use on wood and steel and has a high chemical resistance to fresh and salt water, diesel, oil, and acidic and basic solutions. Ceramite Yachting is easily cleaned with an ordinary liquid detergent as it has a hard, glossy surface.


Theoretical coverage (m²/ LT): 6,7

For further information please visit Veneziani’s website.

Technical data sheet (TDS)

 

Danboline – Top coat for bilges

Danboline protects bilges, lockers and bulkheads against moisture penetration, and wear and tear.

Danboline will resist oil and fuel spillage and cleans easily.

 

Theoretical coverage (m²/ LT): 11

Thinner: No. 1

 

For further information visit International’s website.

Ecoplast – Epoxy coating

Epoxy coating for internal use where there is contact with foodstuffs. Recommended for the treatment of iceboxes, cool boxes, galleys and drinking water containers. This product is certified for use with foodstuffs, in particular drinking water, fresh and refrigerated fish, molluscs, crustaceans, etc. Ecoplast is an odourless, solvent-free product which is easy to apply even in confined areas. This product is a sealant and a barrier paint with a high resistance to chemical agents. Ecoplast conforms to D.M.21/3/1973 (concerning hygiene in packaging, containers and utensils intended to come into contact with foodstuffs) and DM 06/04/2004 n.174 (concerning materials and equipment used in facilities for the containment, treatment, conveyance and distribution of drinking water for human use).

Theoretical coverage (m²/ LT): 6,5

Recommended thinner: (for cleaning only) 6610

For further information please visit Veneziani’s website.

 

Technical data sheet (TDS)

 

Interdeck – Slip-resistant deck paint

 

A tough, slip resistant deck paint that protects the surface from every day wear and tear.

It’s easy to apply with brush or roller, comes in a range of colors and its low sheen finish helps prevent sunlight from reflecting off decks

Can be applied on: Aluminium / Zinc-Galvanised Steel, GRP / FRP, steel or wood
Theoretical coverage (m²/ LT): 10

Thinner: No. 1

 

For further information please visit International’s official website.

Technical Data Sheet(TDS):

Non-skid Deckcoating – Slip-resistant deck paintEpifanes

 

Epifanes nonskid Deckcoating is a one-component, semi-gloss, urethane/alkyd based nonskid deckpaint containing a measured amount of polypropylene beads as the nonskid agent.

To ensure best water resistance, apply Nonskid Deckcoating over at least 2 high gloss coats.

Application:

  • Application by shorthaired roller provides an even distribution of the beads
  • Stir well before and during use
  • Allow the final coat at least 72 hours to harden thoroughly

 

Recommended thinner: Epifanes Brush thinner for Paint & Varnish (SKU: 39-0050, 39-0051)

Theoretical coverage 3-6 m²/750ml

 

Technical data sheet(TDS):

Sentiflex – Bilge enamel


Glossy enamel based on specially resins that confers good chemical resistance, in particular to the humidity penetration, oils, fuel and detergents. This enamel, odorless, can be applied directly on, upon preparation, GPR, wood, steel and aluminium. Easy to apply, has a good coverage power with excellent levelling.
Theoretical coverage (m²/ LT): 12,5

Thinner: 6470

For further information please visit Veneziani’s website.

Technical data sheet (TDS)

 

Speedy Carbonium – 2 component antifouling


Speedy Carbonium is a two-component carbon fiber reef as the active ingredient for better performance in fast sailing. Suitable for fast boats made of GRP, wood, steel and aluminum (with suitable primers). The application should be done only with a pistol. After application it is possible to sand with sandpaper in order to improve the smooth surface.

Theoretical coverage per layer (m²/LT): 10.5

Recommended thinner: 6470

For more information please visit Veneziani’s website.

Showing all 8 results

X