200 Teak Cleaner
Deep cleans teak and exotic woods. Removes the tasks and degreased. Alkaline detergent.
201 Teak Brightener
Functions:
– Renovates and brightens teak.
– Brings a radiant sandy color.
Features:
– Acide solution.
– Use after Clinazur 200 Teak cleaner.
Direction for use :
1. Use diluted from 30 to 40% in water.
2. Apply the mixture with a brush on the wet wood and in the direction perpendicular to the fibers.
3. Leave on from 5 to 10 min.
4. Rinse thoroughly with clean water.
222 Cleaner Powder
Functions:
– Cleans and deeply degreases the teak.
Features:
– Without arsh acids or solvents
Direction for use:
1. Dilute 150 to 200 gr in 10L of freshwater (double the rate for heavy duty cleaning).
2. Wet the surface to be cleaned and spread the solution with a soft or medium brush.
3. Leave for 15 to 20 minutes.
4. Rinse with plenty of water under pressure when possible.
Oil DECKS Olje D1 Owatrol
Can be applied to both horizontal or vertical surfaces. Saturates and protects all woods.
Excellent penetration – non-film forming. Replaces the natural oils lost from the wood – will not blacken the timber.
Transparent – Enhances the woods natural grain.
Deep penetrating, stabilises the timber – Protects against moisture ingress.
Easy maintenance – no sanding or stripping.
Used alone, gives a silken matt finish or overcoat with DEKS OLJE D2 for a high gloss finish.
 Coverage rate for maintenance: 8 to 12 m²/l – Multicoat coverage: 1 to 4 m²/l |
 Application temperature: +5°C to +35°C |
 Drying: 24 h. – Setting up time before use: 3 days |
Technical data sheet:
Teak 1 Cleaner
Teak 1 removes all kind of contaminations from wood. The pH of Teak 1 only slightly alkaline, therefore it cleans thoroughly, removing the soil but leaving the “oily” content of the wood unharmed.
For further information please visit Veneziani’s website.
Teak 2 Brightener
Sunlight, salt and pollution affect the original appearance of teak resulting in a greyish colour.
With Teak 2 the wood regains its original colour.
For further information please visit Veneziani’s website.
Technical data sheet:
Safety data sheet:
Teak 3 Oil
Teak 3 besides impregnating wood and reducing soil penetration, restores the natural oil content of wood.
Furthermore Teak 3 enhances the natural colour of teak and makes the surfaces softer to touch.
Available in two shades, gold and transparent.
For more information please visit Veneziani’s website.
Technical data sheet:
Safety data sheet:
Teak oil sealer Epifanes
A traditional impregnating oil, based on linseed oil and alkyd resin. Protects teakwood from discoloration caused by weather or pollutants. Ideal for the maintenance of teak decks.
May be applied wet-on-wet. Degrease wood with Epifanes Spray thinner for Paint & Varnish and allow to evaporate.
Apply with a wide brush or lint free cloth until surface is saturated. Remove excess material.
Application:
Maintenance and protection of teak decks, teak railings, grips and other teak parts on board, such as furniture.
For interior and exterior use above the waterline. Suitable for fresh and salt water.
Avoid excessive film building.
Theoretical coverage (lt/m²): 7
Teak Wonder Brightener
TEAK WONDER® BRIGHTENER is a lightening process used to eliminate shading from the teak which may still persist even after the application of the TEAK WONDER® CLEANER. The application of TEAK WONDER® BRIGHTENER is not always necessary, but when used on aged surfaces it has an effect that seems miraculous: the teak immediately regains its natural colour (like newly sanded but without removing precious layers of grain).
The brightening process should be carried out on a wet surface, ideally straight after cleaning. Apply TEAK WONDER® BRIGHTENER sparingly and evenly to avoid a patchy result then wash the deck.
The effect of the TEAK WONDER® BRIGHTENER, is immediate and the result instant. As with the cleaner, rinse away the solution with plenty of fresh water. The product is neither caustic nor aggressive, and will not damage rubber seals, paint or hardware. Once dry, the surface is ready for application of protective TEAK WONDER® DRESSING & SEALER.
Carefully wash away any product left on non teak surfaces.
The coverage is approximately 8-10 m2/ltr (depending on the condition of the wood).
Teak Wonder Cleaner
TEAK WONDER® CLEANER is a powerful cleanser that thoroughly cleans the teak easily and with very little effort, without the need for sanding. The product is neither caustic nor aggressive, and will not damage rubber seals, paint or hardware. The grey oxidisation and dirt are removed in a few minutes.
The cleaning process is carried out by wetting the surface to be cleaned thoroughly with fresh water, then apply the cleaner evenly and brush the deck with a soft bristle brush, across the grain (do not apply too much pressure, this avoids damaging the teak fibres). Rinse the soapy solution off with plenty of fresh water and do not allow the wood to dry prior to starting the brightening process.
On heavily soiled surfaces, which have significant oxidisation or have not been cleaned for a long time, a second cleaning may be necessary before starting the brightening process.
Carefully wash away any product left on non teak surfaces.
The coverage is approximately 6-8 m2/ltr (depending on the condition of the wood).
Safety data sheet:
Teak Wonder Combo Pack 1+1 lt (Cleaner & Brightener)
TEAK WONDER®COMBO PAK is a complete kit for cleaning small areas. The kit contains a one litre bottle of cleaner and a one litre bottle of brightener to perform the complete cleaning cycle. The bottles are equipped with a handy cap/pourer that allows easy use of the products, avoiding waste.
The coverage is approximately 6-8 m2/ltr (depending on the condition of the wood).
Safety data sheet:
Teak Wonder Dressing & Sealer
New teak is subject to rapid aging if not cleaned daily with fresh water or a suitable protective product applied. Most protective treatments for teak on the market are oil-based stains that have several drawbacks: they falsely darken the teak, absorb dust and dirt; in warm conditions the oil is brought to the surface and can make the deck slippery and greasy; it can also stain clothes.
TEAK WONDER® DRESSING & SEALER is a safe and durable, non-oil based product which provides a pleasant golden colour without darkening the teak or producing that fake coloured look. The special components in TEAK WONDER® DRESSING & SEALER seal the wood, blocking the penetration of dust and dirt whilst protecting the natural teak oils against ultraviolet rays, slowing the oxidation and discoloration process. The sealing treatment helps inhibit the penetration into the wood of liquids such as fuel, oil, fish blood, paints, etc. As long as these are not allowed to dry, they will be much easier to remove.
TEAK WONDER® DRESSING & SEALER does not make the teak glossy or slippery, does not falsely darken the teak and does not build up an accumulation on the surface. The product is quick drying and does not smell. It is recommended that two coats are applied (with heavy brush strokes) on new teak. If teak is old or dirty, then the wood should be previously treated with TEAK WONDER® CLEANER and TEAK WONDER® BRIGHTENER, allowing the wood to dry completely before the sealing process. Another coat of sealer can be applied after 8-12 weeks without repeating the cleaning process.
The product must be mixed thoroughly before use. Immediately wipe away any drips or marks on non teak surfaces.
Safety data sheet:
Teak Wonder Instant Teak Cleaner
Teak Wonder Instant Teak Cleaner is a cleaning foam for removing dirt from small surfaces without the need for rinsing.
Simply cover the area with cleansing foam, leave it on for 2-3 minutes and then wipe with a clean damp cloth. The cleaning foam must be removed before it dries. It can be used in various types of materials such as teak, plastic, fiberglass, fabrics etc.
For painted surfaces, test first on an a small area.
For more intense discoloration in the teak it is recommended to use TEAK WONDER® CLEANER and TEAK WONDER® BRIGHTENER.
Do not apply on hot surfaces or surfaces exposed to direct sunlight.
Safety data sheet:
Varnish DECKS Olje D2 Owatrol
Flexible film that does not crack, peel or flake. High gloss finish.
Highly transparent varnish – enhances the natural beauty of the wood.
Offers long term protection.
No sanding between coats. Easy maintenance. Easy repair, no stripping.
| Coverage: 15 m²/l |
| Application temperature: +8°C to +35°C |
| Drying: 12 h. (between each layer) – Working time: 3 days |
Technical data sheet:
Woody – preserves and regenerates teak
Woody is a professional concentrated product created by MA-FRA with naturally derived surface acting agents, that preserves and regenerates teak boat parts.
Woody is a “two in one” product. Pure it provides an extraordinary cleaning action: its formula, with natural surface acting agents and high penetrating powers, cleans wood deep down by lifting and breaking the dirt, removing black marks, impurities and all traces of mould and seaweed, restoring the original conditions of the materials without the need to laminate or sand the surface.
Diluted, as directed, it is suitable for washing wood regularly under normal conditions: the waterproofing wax contained in the formulation seals the open grains and preserves the wood by boosting its original beauty. It can also be diluted with sea water.
