Accumulator tank 0,7Lt Shurflo
Reduce cycling pulsation and pressure spikes, increase the life of your pump and even save battery power. Easily handles pressure requirements from 20 PSI to 125 PSI.
- Reduces pump cycling
- Smooths water faucet pulses
- Pre-pressurized to 30 PSI with built-in diaphragm
- Supported for industrial and marine
Accumulator tank 2lt Johnson
- For installation in any pumped water system controlled by a pressure switch up to max 12 bar (174 PSI) operating pressure
- The Accumulator tank smooths water flow and reduces on/off cycling of the pump by lessening the variation in pressure and flow between the pump and the outlets in the system
- Reduces noise, battery drain and improves pump life
- Mounts in any position
- Retainer for mounting included
Manual:
Accumulator tank Jabsco
Accumulator tanks enhance the performance of their pressure pumps. An accumulator tank is a water chamber which has a pre-pressurized internal air bladder. They are installed in the pressured side of your pump and dampen water pressure ‘spikes’, reduce pump cycling, help increase the pump’s life and also save battery power.
May be mounted in any attitude.
Accumulator tank Marco
White coated and stainless steel accumulator tank for automatic pumps.
Technical data sheet:
Automatic bilge pump Rule
- Fully automated operation
- Tough plastic body with integral strainer
- Quick release strainer allows rapid cleaning
- Low amp draw conserves batteries
- Checks for water every 2 1/2 minutes (Runs for 1/2 second)
- Consumes 0.20 amps per day
- Built-in thermal cut-off
- Check Valve included for back flow prevention
- Vented body to prevent air locking
- Threaded port for easier installation and maintenance
- No Need for separate float switch, third wire for manual override
Automatic bilge pump Sahara Attwood
Combine sturdiness, simplicity of use and high efficiency:
- Motor is automatically operated by a reliable mechanical float switch (non toxic ; contains no mercury).
- Shaft seal and caulked wiring provide extra protection to the motor, preventing leak paths. The free flow of water around the motor housing keeps motor cool for extended life.
- 316 stainless steel motor shaft for saltwater corrosion resistance. Steel reinforced motor shaft ensures perfect alignment of shaft and seal, thus preventing leaks.
- Durable impeller is made of tough, high-impact, glass filled polyester.
- Re-enforced filter for optimum protection of the impeller.
- Test knob allows for easy and immediate operational check without disassembly.
- Compact size and low-profile design allow installation in tight places.
Sahara Mk2 is the only automatic bilge pump that eliminates air-locks. Its engineered performance forces air bubbles trapped in the hose and underside of the pump out of the pipework, so that the pump will not run dry and burn out. This breakthrough technology makes Sahara Mk2 the most reliable automatic bilge pump in freshwater and saltwater applications.
Brochure: Datasheet:
Automatic float switch TMC
Automatic float switch to work with bilge pumps drawing under 10Amp.
Can be used with either 12V or 24V.
Automatic low profile bilge pump TMC
Automatic low profile bilge pump designed for confined or tight space (under engines or cockpit floors).
Automatic operation with sensor. Drains down as low as 10mm.
Strainer can be rotated & cover can be removed for easy cleaning.
Holes on top to prevent airlocks. Also, the outlet port can be rotated for different installation purpose (vertical or horizontal mounting).
Bilge pump auto-eye series TMC
Pump with integrated electronic float switch – sensor for automatic operation.
Ideal for places where due to lack of space the use of a separate float switch is difficult.
Auto-eye pumps are built with compact, efficient, long life motor, rust and corrosion protected stainless steel shaft and high-impact durable plastic housing.
Quick release strainer for easy cleaning.
Bilge pump automatic Rule Mate
Pump with integrated electronic float switch- sensor for automatic operation.
Ideal for places where due to lack of space the use of a separate float switch is difficult.
Bilge pump bell type TMC
Bilge pumps T02 series and T20 series.
Articles 17-0009 and 17-009-1 are Τ20 series.
CE Certified
Bilge pump cylinder TMC
Submersible bilge pump
- Heavy duty design
- Permanent magnet motor
- Corrosion resistant plastic housing
- Simple snap-off base strainer for easy inspection & cleaning
- CE Certified
- ISO 8846 MARINE (Ignition Protect)
- ISO 88449 MARINE (Bilge Pump Standard)
Bilge pump panel switch 3 positions
Remote control of automatic bilge pumps or bilge pumps with float switches.
3-way rocker switch has Auto, OFF and Manual positions.
Manual position has spring back feature to prevent bilge pump from continuously running.
Power indicator light confirms system power. Panel mounted fuse makes replacement easier.
Compatible with bilge pumps that draw up to 15A.
Bilge pump Piranha Shurflo
Shurflo Bilge Pumps are built for the harsh marine environment to withstand the toughest conditions. Standard with 3′ tinned wire assembly for below waterline installations.
- Anti-Airlock
- Continuous Duty
- Tough Nylon Housing
- Ignition Protected
- CE Listed
Installation & maintenance manual:
Bilge pump submersible Johnson
- Extremely energy efficient
- Water-cooled motor for long service intervals
- Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft
- No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
- Can be combined with either an automatic switch AS888, an electronic float switch or the Ultima Switch for automatic operation
Technical data sheet:
Bilge pump submersible Rule
Bilge pumps RULE. From 360 up to 1100 GPH has cylinder shape and from 1500 GPH up to GPH has bell shape.
- Backflow Prevention – The non-return prevents water left in the discharge from running back, keeping bilges dryer and cleaner.
- Air Vents – Built into the body, they help prevent air locking in challenging plumbing installations.
Available also in square shape at 1000 GPH (article number 17-0223).
Bilge pump Supersub Smart Whale
Low profile automatic pump for confined bilge spaces. Built-in field sensor switch, no maintenance required.
Excellent operation even in case of dirt, oil, fuel, etc.
Easy access to strainer.
Bilge pump TMC
TMC Handy Pump equipped with a handle for portability, works as a multi-functional pump.
For discharging bilge water, deck cleaning, replacing water for fish etc.
Caravan pump TMC
Submersible caravan pump to be used with fresh water.
The compact design makes this pump ideal for confined spaces.
Commercial & Utility Puppy Jabsco
Self-priming pumps with brass head and flexible impeller.
General purpose from pumping water from bilges to deck washing.
Utility pumps manual:
Commercial duty pumps manual:
Diaphragm foot pump TMC
Diaphragm foot pump, self-priming & double acting.
Diaphragm hand pump TMC
Diaphragm hand pump with two position handle
Diaphragm washdown pump kit 36503 TMC
Diaphragm pump washing kit:
- Suitable for water transfer, deck shower, deck wash etc
- Self-priming 4.3 gpm (16.3 lpm) diaphragm pressure pump 40 psi
- Built-in thermal overload protection
- Built-in check valve to prevnt backflow
- Can be run dry
- C/W pump, strainer, port fittings (1/2”; 13mm), trigger w/ adjustable jet & lockable lever, and 7m (25 ft.) spring coiled hose
For more information you can visit TMC’s website by clicking here.
Electric field sensor switch Whale
Totally sealed, with no moving parts, the Whale Field Sensor Automatic Pump Float Switch has a nylon body and will not corrode and is not affected by oil or foreign debris or obstructions.
Suitable for both 12 V and 24 V systems for pumps up to 20 amp rating.
Ideal for bilge pumps, shower pumps and other grey water pumps where reliability is essential.
The switch activates when the water level reaches 51 mm (2″) and deactivates when the water level drops below 13 mm (1/2″) therefore avoiding pump cycling.
Manual:
