Automatic bilge pump Rule
- Fully automated operation
- Tough plastic body with integral strainer
- Quick release strainer allows rapid cleaning
- Low amp draw conserves batteries
- Checks for water every 2 1/2 minutes (Runs for 1/2 second)
- Consumes 0.20 amps per day
- Built-in thermal cut-off
- Check Valve included for back flow prevention
- Vented body to prevent air locking
- Threaded port for easier installation and maintenance
- No Need for separate float switch, third wire for manual override
Automatic bilge pump Sahara Attwood
Combine sturdiness, simplicity of use and high efficiency:
- Motor is automatically operated by a reliable mechanical float switch (non toxic ; contains no mercury).
- Shaft seal and caulked wiring provide extra protection to the motor, preventing leak paths. The free flow of water around the motor housing keeps motor cool for extended life.
- 316 stainless steel motor shaft for saltwater corrosion resistance. Steel reinforced motor shaft ensures perfect alignment of shaft and seal, thus preventing leaks.
- Durable impeller is made of tough, high-impact, glass filled polyester.
- Re-enforced filter for optimum protection of the impeller.
- Test knob allows for easy and immediate operational check without disassembly.
- Compact size and low-profile design allow installation in tight places.
Sahara Mk2 is the only automatic bilge pump that eliminates air-locks. Its engineered performance forces air bubbles trapped in the hose and underside of the pump out of the pipework, so that the pump will not run dry and burn out. This breakthrough technology makes Sahara Mk2 the most reliable automatic bilge pump in freshwater and saltwater applications.
Brochure: Datasheet:
Automatic low profile bilge pump TMC
Automatic low profile bilge pump designed for confined or tight space (under engines or cockpit floors).
Automatic operation with sensor. Drains down as low as 10mm.
Strainer can be rotated & cover can be removed for easy cleaning.
Holes on top to prevent airlocks. Also, the outlet port can be rotated for different installation purpose (vertical or horizontal mounting).
Bilge pump auto-eye series TMC
Pump with integrated electronic float switch – sensor for automatic operation.
Ideal for places where due to lack of space the use of a separate float switch is difficult.
Auto-eye pumps are built with compact, efficient, long life motor, rust and corrosion protected stainless steel shaft and high-impact durable plastic housing.
Quick release strainer for easy cleaning.
Bilge pump automatic Rule Mate
Pump with integrated electronic float switch- sensor for automatic operation.
Ideal for places where due to lack of space the use of a separate float switch is difficult.
Bilge pump bell type TMC
Bilge pumps T02 series and T20 series.
Articles 17-0009 and 17-009-1 are Τ20 series.
CE Certified
Bilge pump cylinder TMC
Submersible bilge pump
- Heavy duty design
- Permanent magnet motor
- Corrosion resistant plastic housing
- Simple snap-off base strainer for easy inspection & cleaning
- CE Certified
- ISO 8846 MARINE (Ignition Protect)
- ISO 88449 MARINE (Bilge Pump Standard)
Bilge pump Piranha Shurflo
Shurflo Bilge Pumps are built for the harsh marine environment to withstand the toughest conditions. Standard with 3′ tinned wire assembly for below waterline installations.
- Anti-Airlock
- Continuous Duty
- Tough Nylon Housing
- Ignition Protected
- CE Listed
Installation & maintenance manual:
Bilge pump submersible Johnson
- Extremely energy efficient
- Water-cooled motor for long service intervals
- Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft
- No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
- Can be combined with either an automatic switch AS888, an electronic float switch or the Ultima Switch for automatic operation
Technical data sheet:
Bilge pump submersible Rule
Bilge pumps RULE. From 360 up to 1100 GPH has cylinder shape and from 1500 GPH up to GPH has bell shape.
- Backflow Prevention – The non-return prevents water left in the discharge from running back, keeping bilges dryer and cleaner.
- Air Vents – Built into the body, they help prevent air locking in challenging plumbing installations.
Available also in square shape at 1000 GPH (article number 17-0223).
Bilge pump Supersub Smart Whale
Low profile automatic pump for confined bilge spaces. Built-in field sensor switch, no maintenance required.
Excellent operation even in case of dirt, oil, fuel, etc.
Easy access to strainer.
Bilge pump TMC
TMC Handy Pump equipped with a handle for portability, works as a multi-functional pump.
For discharging bilge water, deck cleaning, replacing water for fish etc.
Caravan pump TMC
Submersible caravan pump to be used with fresh water.
The compact design makes this pump ideal for confined spaces.
Commercial & Utility Puppy Jabsco
Self-priming pumps with brass head and flexible impeller.
General purpose from pumping water from bilges to deck washing.
Utility pumps manual:
Commercial duty pumps manual:
Diaphragm washdown pump kit 36503 TMC
Diaphragm pump washing kit:
- Suitable for water transfer, deck shower, deck wash etc
- Self-priming 4.3 gpm (16.3 lpm) diaphragm pressure pump 40 psi
- Built-in thermal overload protection
- Built-in check valve to prevnt backflow
- Can be run dry
- C/W pump, strainer, port fittings (1/2”; 13mm), trigger w/ adjustable jet & lockable lever, and 7m (25 ft.) spring coiled hose
For more information you can visit TMC’s website by clicking here.
Electric gear pump TMC
Self-priming electric gear pump with bronze gear pumping elements inside.
Do not use where flammable vapor are present.
Gulper toilet pump BP2552 Whale
The Gulper Toilet Pump BP2552 is designed to manage unmacerated toilet waste, and is ideal for holding tanks and vacuum systems.
- Pumps unmacerated toilet waste
- Runs dry without damage
- Up to 18 ltrs (4.75 US gal) per minute
- Virtually unblockable
- Rotatable inlet and outlet- allows you to install in awkward locations
- Self priming up to 3 m (9.8 ft)-mount the pump in the most convenient part of boat
- Pumps a mixture of air and waste
- Easy to maintain, large single diaphragm
In-line pump TMC
Handy small diameter submersible and in-line pump designed for use in confined spaces.
- Non-self priming centrifugal pump
- Light-weighted to suspend in the pipework
- Sonic-welded submersible unit
- Intermittent operation design
Macerator pump 18590 Jabsco
Toilet waste macerator pump, grinds raw toilet waste to a uniform slurry for easy transfer and discharge.
Macerator pump TMC
Self-priming toilet waste pump. Combines pre-macerator with impeller pump.
Designed for in-line installation on holding tank pump out or to convert manual vacuum toilets to electric operation.
Do not run dry.
Oil gear pump Marco
Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft.
Not intended for gasoline, solvents or chemicals.
Shower & sink drain pump TMC
Single diaphragm pump suitable for extracting water from the showers and washbasins of the boat.
Self-priming pump, can be run dry.
With 360° rotating head.
Shower drain – diaphragm pump 37202 Jabsco
Self-priming shower drain diaphragm pump 37202-2012 Jabsco.
Shower drain – diaphragm pump 50880 Jabsco
Self-priming diaphragm pump 12 Volt DC.
- Robust, quiet single diaphragm design
- No strainer required
- Single diaphragm design allows extended dry running
- Multi-positional ports for easy mounting
