90° elbow fitting Whale
Whale Quick Connect fittings ensure a high integrity, reliable, plumbing system solution, specifically designed for use in mobile applications
WX15 fittings and pipework design ensures easy installation and re-usability of components. The simple two step installation procedure does not require special tools to make a watertight connection.
- Unique ‘WX15 Double Gripper’ design provides secure lifelong pipework retention even at excessive pressures
- The innovative ‘cage collet’ eliminates leaks where fittings are installed close to tight bends
- Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure
- High integrity single piece moulding improves the strength of the fittings
- Outer sleeve incorporates collet cover, thus preventing accidental pipework release
- Collet clips are not necessary and therefore reduce installation time
- Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully
Anode for water heaters resistances
Magnesium anode intended mainly for resistances of QUICK water heaters.
Elbow hose connector Whale
Whale Quick Connect hose connector available in 15mm to 1/2″ or 15mm to 3/4″.
Equal straight WX1504 Whale
Whale WX1504 QuickConnect Equal Straight, 15-15mm.
The simple two step installation procedure does not require special tools to make a watertight connection.
Heating element & anode 220V-1200W
Heating element with anode 1200W/220V.
This heating element is suitable for water boilers. It is specifically designed for use in pressurized water systems.
Heating element 220V-500W
Heating element 500W/220V.
This heating element is suitable water boilers. It is specifically designed for use in pressurised water systems.
Hose Ø15mm for quick connect plumbing system (10mt) Whale
- Blue hose Ø15mm for cold water. Max pressure 12 bar max temperature 20°C.
- Red hose Ø15mm for hot water. Max pressure 6 bar max temperature 65°C.
Pressure relief safety valve 1/2″
Pressure relief safety valve 1/2″ for water heaters, 4 bar activation pressure.
Quick connect adaptor female 1/2″ Whale
Whale Quick Connect fittings ensure a high integrity, reliable, plumbing system solution, specifically designed for use in mobile applications
WX15 fittings and pipework design ensures easy installation and re-usability of components. The simple two step installation procedure does not require special tools to make a watertight connection.
- The innovative ‘cage collet’ eliminates leaks where fittings are installed close to tight bends
- Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure
- High integrity single piece moulding improves the strength of the fittings
- Outer sleeve incorporates collet cover, thus preventing accidental pipework release
Quick connect adaptor female Whale
Quick connect adaptor with 1 fitting 15mm and 1 female fitting 3/8″ ή 1/2″ ή 3/4″.
Whale Quick Connect fittings produce high integrity, reliable plumbing systems specifically designed for mobile applications. Fittings and tubing design ensures easy installation and re-usability of components.
The simple two-step installation procedure does not require any special tools to make a watertight connection. Just cut the tubing to length and insert it into the fittings. Remove by pushing in on the collet and pulling the tubing out.
Quick connect male adaptor Whale
Whale Quick Connect fittings ensure a high integrity, reliable, plumbing system solution, specifically designed for use in mobile applications
WX15 fittings and pipework design ensures easy installation and re-usability of components. The simple two step installation procedure does not require special tools to make a watertight connection.
QuickConnect adaptor WX1593 Whale
Whale Quick Connect fittings ensure a high integrity, reliable, plumbing system solution, specifically designed for use in mobile applications.
WX15 fittings and pipework design ensures easy installation and re-usability of components. The simple two step installation procedure does not require special tools to make a watertight connection.
Unique ‘WX15 Double Gripper’ design provides secure lifelong pipework retention even at excessive pressures
The innovative ‘cage collet’ eliminates leaks where fittings are installed close to tight bends.
Collet has internal support ring ensuring o-ring seal is held in position and does not distort or leak under pressure.
Round water heater inox- plastic Quick
The Quick Model B3 is a round water heater that produces water from an incoloy electric heating element that is fitted with an adjustable safety bi-thermostat.
This unit is equipped with a heat exchanger composed of AISI 316L stainless steel with a capacity that is notably higher than that achieved from other manufacturers.
The interior of the tank is made of 1.5 mm gauge AISI 316 stainless steel welded with Argon shielding gas which enables it to be highly resistant to corrosive agents. The exterior of the tank is composed of a highly durable plastic composite material. The unit has thermal insulation composed of high density polyurethane foam which is injected between the cover and tank thus providing excellent heat retention properties.
The boilers are equipped with a heat exchanger for the engine cooling water.
The B3 unit also comes with adjustable metal brackets which provide more flexibility for mounting when dealing with tight spaces.
This unit comes equipped with the water heater, mounting brackets, and 4 brass fittings.
Round water heater Ιnox Quick
The Quick Model BX is a round water heater that produces water from an incoloy electric heating element that is fitted with an adjustable safety bi-thermostat.
This unit is equipped with a heat exchanger composed of AISI 316L stainless steel with a capacity that is notably higher than that achieved from other manufacturers.
The interior of the tank is made of 1.5 mm gauge AISI 316 stainless steel welded with Argon shielding gas which enables it to be highly resistant to corrosive agents. The exterior of the tank is composed of a sleek looking 304 AISI stainless steel.
The unit has thermal insulation composed of high density polyurethane foam which is injected between the cover and tank thus providing excellent heat retention properties.
The boilers are equipped with a heat exchanger for the engine cooling water.
The BX unit also comes with adjustable metal brackets which provide more flexibility for mounting when dealing with tight spaces.
This unit comes equipped with the water heater, mounting brackets, and 4 brass fittings.
Shut Off valve Whale
Whale WX1574 QuickConnect Shut-Off Valve, 15mm
Whale Quick Connect fittings ensure a high integrity, reliable, plumbing system solution, specifically designed for use in mobile applications
WX15 fittings and pipework design ensures easy installation and re-usability of components. The simple two step installation procedure does not require special tools to make a watertight connection.
Thermostat 15Α-27cm
OSP Kit Bi-Termostat 15A 270mm for water heaters Quick.
Thermostatic mixing valve kit
A thermostatic mixing valve is a valve that blends hot water with cold water to ensure constant, safe shower and bath outlet temperatures, preventing scalding. The thermostatic mixing valve is suited perfectly for Quick water heaters. This kit is sold complete with the valve, hose and fittings.
Water heater square inox Quick
The BXS water heater range is distinguished by the square-shape design, making for particularly easy installation. Tank in AISI 316 stainless steel, Casing in AISI 304 stainless steel.
The boilers are equipped with a heat exchanger for the engine cooling water.
Fittings 1/2″.
Manual:
Τee fitting Whale
Whale Quick Connect fittings ensure a high integrity, reliable, plumbing system solution, specifically designed for use in mobile applications
WX15 fittings and pipework design ensures easy installation and re-usability of components. The simple two step installation procedure does not require special tools to make a watertight connection.
- Accepts tubing with a 15mm external diameter
- Innovative double-gripper design provides secure, lifelong tube retention
- Internal support ring that ensures the O-ring seal remains in position with no leaking
- Fitting is intended for use with cold and hot water
