Shop

Showing 1–60 of 2312 results

“Hot Dog” 2 person inflatable towable Airhead

 

Inflatable towable designed for up to 2 riders.

HOT DOG has deluxe nylon-wrapped handles with neoprene knuckle guards.

 

“Hot Dog” 3 person inflatable towable Airhead

 

Inflatable towable designed for up to 3 riders.

HOT DOG has deluxe nylon-wrapped handles with neoprene knuckle guards.

 

03 Bilge & engine cleaner

 

Functions:
– Cleans
– Degrease
– Work in the holds, engines, mechanical parts.

Features:
– Emulsifying
– Treats mineral deposits, crude or refined oil residues, oils, mud in the bilge, on engines etc.

Direction for use:
1. Diluted from 20 to 30% in water.
2. Spray or apply the mixture with a brush on the surface to be cleaned.
3. Leave on for 10 minutes.
4. Rinse thoroughly with clean water.

100SP Rust off cleaner

 

Functions:
– Yellow stain and rust deposit remover.
– Works great on plastics, gelcoat, painted surfaces.

Features:
– Made of oxalic acid.
– Ready to use

102 Multi purpose rust remover

2 in 1: Application pure gel or liquid dilution:

Functions:
– Deoxidized and removes rust stains.
– Removes yellow stain.
– Does not damage the gelcoat.

Features:
– Work on plastics, gelcoat, painted surfaces and metals

2-stroke oil DFI (ΟΡΤΙΜΑΧ) Quicksilver 4Lt

 

Quicksilver Optimax / DFI Oil 4Ltr – Two stroke oil, formulated to cope with higher operating temperatures and reduced oiling rates of Direct Fuel Injection outboards. Increased lubricity minimizes carbon deposits and reduces smoke, protecting your engine at all times.

Continued use of this oil will:

  • Provide outstanding wear and corrosion protection which will help extend engine life
  • Minimize performance-robbing carbon deposits
  • Maintain peak engine performance and reliability
  • Reduce smoke

Recommended for use in direct injection two-cycle engines such as Mercury Optimax.

200 Teak Cleaner

 

Deep cleans teak and exotic woods. Removes the tasks and degreased. Alkaline detergent.

201 Teak Brightener

 

Functions:
– Renovates and brightens teak.
– Brings a radiant sandy color.

Features:
– Acide solution.
– Use after Clinazur 200 Teak cleaner.

Direction for use :
1. Use diluted from 30 to 40% in water.
2. Apply the mixture with a brush on the wet wood and in the direction perpendicular to the fibers.
3. Leave on from 5 to 10 min.
4. Rinse thoroughly with clean water.

204 Gel Coat Restorer

 

Functions:
– Removes stains, light scratches, restores original colour and shine.
– For fiberglass, gelcoat, stainless steel and painted surfaces.

Features:
– Coarse rubbing compound.
– Silicon and PTFE free.

Direction for use:
1. Spread a small amount of 204 with a clean wet sponge.
2. Rub with a dry cloth to remove all traces.

1. Use a polisher for important surfaces.
2. Low speed is recommended.

205SI Hull-deck Cleaner

205 SI is a highly concentrated alkaline detergent. It ensures efficient cleaning of painted surfaces, plastics, stainless steel, wood and metals without danger to the surfaces.

It quickly removes static film, dirt and salt deposits. Its concentration allows regular use with a low dosage. Formulated without phosphates and its concentration allows regular use at low dosage.

205WW Wash & Wax Shampoo

 

Functions :
– Cleans
– Protects
– Brings a glossy finish with no stains.
– Leaves a water repellent film.

Features :
– For gelcoat, painted surfaces and varnished.
– Green apple scent.

Direction for use :
1. Dilute 3/7 % in water.
2. Wet the surface and apply the mixture with a soft brush.
3. Leave for a few minutes.
4. Rinse thoroughly with clean water.

214 Sail & Canvas cleaner

 

214 Sail & Canvas cleaner is a liquid concentrate designed for cleaning sails and awnings. Highly effective on all textiles, using hot or cold water. Does not foam excessively.

216 Non-skid Deck Cleaner

Functions :
– Cleans and removes salt, dirt and crime.
– For all non skid deck, covers and vinyl.

Features :
– Concentrated formulation.

Direction for use :
1. Dilute to 10% in water.
2. Apply the mixture with a medium or hard brush on the surface to be cleaned.
3. Leave for a few minutes.
4. Rinse thoroughly with clean water.

218 High Gloss Teflon Polish

 

Functions:
– High shine finish.
– Long lasting protection.

Features:
– Shake before use.

Direction for use:
1. Apply with a microfiber or polisher in circular motion.
2. Let dry a few minutes.
3. Buff with a dry cloth or machine in low speed until no traces are left.

219 Inflatable boats cleaner

 

 

Functions:
– Cleans and removes salt, dirt, grime and black stains.

Features:
– Available for all kind of tenders.

Direction for use :
1. Dilute 10% to 20% in water.
2. Apply the mixture with a sponge or brush on the surface to be cleaned.
3. Rinse with clear water.
3. Repeat the operation for the most stubborn stains.

220 Stainless steel polish

 

Functions:
– Shines and protects chrome, stainless steel and copper.
– Deoxidizes.
– Erase surface scratches.

Features:
– Acts like a liquid rubber.

222 Cleaner Powder

 

Functions:
– Cleans and deeply degreases the teak.

Features:
– Without arsh acids or solvents

Direction for use:
1. Dilute 150 to 200 gr in 10L of freshwater (double the rate for heavy duty cleaning).
2. Wet the surface to be cleaned and spread the solution with a soft or medium brush.
3. Leave for 15 to 20 minutes.
4. Rinse with plenty of water under pressure when possible.

291i SIKA Multifunctional adhesive sealant for marine applications

 

Sikaflex®-291i is a non-sag 1-component polyurethane sealant specifically developed for the marine market, which cures on exposure to atmospheric moisture. Sikaflex®-291i meets in addition the low spread of flame requirements set out by the International Maritime Organisation (IMO).

  • Wheelmark approved
  • 1-component formulation
  • Highly elastic
  • Low odour
  • Non-corrosive
  • Can be painted
  • Bonds well to a wide variety of marine substrates
  • Solvent free
  • Very low VOC
  • Low isocyanate content

3-strand high tenacity mooring rope – Blue

High tenacity 3-strand polyester, non floating mooring rope.

Ideal for mooring due to easy splicing

Approximate packing measures +/- 5%.

3-strand high tenacity mooring rope – Black

High tenacity 3-strand polyester, non floating mooring rope.

With distinctive white stripe that differentiates it from the medium tenacity

Ideal for mooring due to easy splicing

Approximate packing measures +/- 5%.

3-strand high tenacity mooring rope – White

High tenacity 3-strand polyester, non floating mooring rope.

With distinctive red stripe that differentiates it from the medium tenacity

Ideal for mooring due to easy splicing

Approximate packing measures +/- 5%.

3-strand medium tenacity mooring rope – Black

Medium tenacity, 3-strand, polyester, non floating mooring rope.

Ideal for mooring due to easy splicing

Approximate packing measures +/- 5%.

3-strand medium tenacity mooring rope – White

Medium tenacity, 3-strand, polyester, non floating mooring rope.

Ideal for mooring due to easy splicing

Approximate packing measures +/- 5%.

405 Chemical toilet treatment

 

Functions:
– Accelerate the biodegradation of organic wastes.
– Removes bad smells.

Features:
– Bio Enzymatic action.
– Non toxic and non caustic.

Direction for use :
1. Prior to use : empty the waste-holding tank.
2. Pour 100 ml of 405 per 10L of tank to be treated.
3. Add fresh water to dilute the product, ensuring that the mixture covers the waste at all times.

80NF Black streaks remover

 

Functions:
– Cleans
– Degrease
– Perfume
– Multi-purpose

Features:
– Work for engines, bilges, floors, rims, coachworks, plastic or painted surfaces, enamel, stainless steel, etc.
– Leave a pleasant sea scent.

90° elbow (male-female) Trudesign

 

TruDesign Connectors are moulded from a glass reinforced nylon composite. High strength, high-modulus glass fibres impregnated into the nylon provides dramatic strength, stiffness, toughness, and dimensional stability.

TruDesign Connectors eliminate the corrosion and electrical bonding problems associated with metallic fittings.

ISO 9093-2 και ABYC H27.

For more information please click  here.

90° elbow fitting Whale

Whale Quick Connect fittings ensure a high integrity, reliable, plumbing system solution, specifically designed for use in mobile applications

WX15 fittings and pipework design ensures easy installation and re-usability of components. The simple two step installation procedure does not require special tools to make a watertight connection.

  • Unique ‘WX15 Double Gripper’ design provides secure lifelong pipework retention even at excessive pressures
  • The innovative ‘cage collet’ eliminates leaks where fittings are installed close to tight bends
  • Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure
  • High integrity single piece moulding improves the strength of the fittings
  • Outer sleeve incorporates collet cover, thus preventing accidental pipework release
  • Collet clips are not necessary and therefore reduce installation time
  • Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully

90° elbow hose tail (female) Trudesign

 

TruDesign composite fittings are moulded from a glass-reinforced nylon composite. High strength, high-modulus glass fibres impregnated into the nylon provide dramatic strength, stiffness, toughness, and dimensional stability.

TruDesign fittings eliminate the corrosion and electrical bonding problems associated with metallic fittings. Tails (Hose barbs) are designed for twin hose clamps and to never crush.

ISO 9093-2 και ABYC H27.

Fore more information click here.

90° elbow hose tail (male) Trudesign

TruDesign Long Thread 90° Tails are designed to screw into the range of Ball Valves but can also be used in many applications. Moulded in glass-reinforced nylon composite these Tails are also suitable for use in contact with petrol and diesel fuels.

TruDesign Tails eliminate the corrosion and electrical bonding problems associated with metallic fittings. Tail fittings are designed for twin hose clamps, and to never crush.

ISO 9093-2 και ABYC H27.

For more information please click here.

90NF Multi-purpose cleaner

 

90 NF is an excellent ready-to-use multi-purpose cleaner that disinfects and perfumes. Cleans everything on board.

Accumulator tank 0,7Lt Shurflo

 

Reduce cycling pulsation and pressure spikes, increase the life of your pump and even save battery power. Easily handles pressure requirements from 20 PSI to 125 PSI.

  • Reduces pump cycling
  • Smooths water faucet pulses
  • Pre-pressurized to 30 PSI with built-in diaphragm
  • Supported for industrial and marine

Accumulator tank 2lt Johnson

 

  • For installation in any pumped water system controlled by a pressure switch up to max 12 bar (174 PSI) operating pressure
  • The Accumulator tank smooths water flow and reduces on/off cycling of the pump by lessening the variation in pressure and flow between the pump and the outlets in the system
  • Reduces noise, battery drain and improves pump life
  • Mounts in any position
  • Retainer for mounting included

Manual:

Accumulator tank Jabsco


Accumulator tanks enhance the performance of their pressure pumps. An accumulator tank is a water chamber which has a pre-pressurized internal air bladder. They are installed in the pressured side of your pump and dampen water pressure ‘spikes’, reduce pump cycling, help increase the pump’s life and also save battery power.

May be mounted in any attitude.

Accumulator tank Marco

White coated and stainless steel accumulator tank for automatic pumps.

Technical data sheet:

 

Adaptor for polishers 05710 3Μ

  • Part of a complete assembly for compounding and polishing
  • Designed to attach buffing pads or backup pads to machine polishers
  • Helps reduce wear and vibration
  • Users can change screw-on pads without removing the adaptor, saving time
  • Provides hassle-free centering with 3M double-sided wool compounding and polishing pads

Adherglass – Primer

Adherglass is a primer which is based on synthetic polymers. It is a one-pack primer providing good adhesion and suitable for use on gel coats, GRP and epoxies such as Epoway and Aquastop.

Adherglass is quick-drying and is used principally as a primer for antifouling on GRP or on new or stripped gel coats.

The surface does not require sanding to guarantee good adhesion, but must be thoroughly degreased.

Theoretical coverage (m²/ LT): 13.3

For further information please visit Veneziani’s website.

Technical data sheet:

Safety data sheet:

Adherpox – Primer

Modified two-pack epoxy primer suitable for boat-hulls but also recommended for topsides and superstructures. Adherpox has been formulated for all types of boat building materials (aluminium included). If several coats are applied, this primer provides good corrosion protection. Thanks to its high solids by volume Adherpox complies with VOC-regulations.

A special feature of Adherpox is its extended recoating interval: 3 months when recoated with antifoulings and 6 months when recoated with an additional coat of Adherpox, without sanding.

Theoretical coverage (m²/ LT): 11

Thinner: 6610

For further information please visit Veneziani’s website.

 

Technical data sheet(TDS)

 

 

Adhesive for Neopren CM-233 Carmyfix

H κόλλα Carmyfix CM-233 είναι κατάλληλη για φουσκωτά από Hypalon & Neopren. Ισχυρή διάφανη κόλλα νεοπρενίου (ψυχρής κόλλησης), με βάση συνθετικό λάστιχο (νεοπρένιο) και συνθετικές ρητίνες. Είναι κατάλληλη για την συγκόλληση δέρματος, υφάσματος, ελαστικού, EVA και φυσικού ελαστικού. Κατάλληλη και για συγκολλήσεις υφασμάτων φουσκωτών σκαφών (υφάσματα neoprene & hypalon).

Η προσθήκη του σκληρυντικού Carmydur (3-5%) αυξάνει την συγκολλητική ισχύ και την αντίσταση στην θερμότητα. Χάρη στα ειδικά χημικά η στεγνή κόλλα παρουσιάζει εξαιρετική αντοχή στο κιτρίνισμα από τον ήλιο. Η τελική σκλήρυνση γίνεται σε θερμοκρασία δωματίου.

H μέγιστη δυνατή συγκόλληση επιτυγχάνεται μετά από 48 ώρες.

Technical data sheet (TDS):

Adhesive for PVC CM-888 Carmyfix

CM – 888 is high quality adhesive suitable for bonding synthetic materials such as Polyurethane, PVC, Thermoplastic Rubber (TR) e.t.c. It has very good adhesion
on the above mentioned substrates and high initial bonding.

Technical data sheet (TDS):

Adhesive plastic welder 25ml Permatex

 

A structural adhesive designed for general purpose bonding of a wide variety of material such as hard and soft plastics to specified surfaces. Forms a tough, durable bond to most plastics, composites, ceramics, wood in any combination.

Fast curing product with gelling of mixed adhesive in 5-6 minutes and fixturing in 9-10 minutes.

NOTE: Will not bond most polyethylene or polypropylene plastics.

Bonds hard and soft plastics to specified surfaces. Requires no primers, sets in five minutes at room temperature. Cream appearance. Gap filling to 0.125 inch.

Water resistant and good chemical resistance.

Temperature range -51°C to 121°C. Permanent strength up to 3500 PSI.

Adhesive sealant 291i SIKA

 

Sikaflex®-291i is a non-sag 1-component polyurethane sealant specifically developed for
the marine market, which cures on exposure
to atmospheric moisture.

  • 1-component formulation
  • Highly elastic
  • Low odour
  • Non-corrosive
  • Can be painted
  • Bonds well to a wide variety of marine substrates
  • Solvent free

Technical data sheet (TDS)

Adjustable battery holder tray inox

Stainless steel battery holder trays with a maximum width of 19 cm while the height ranges from 17 to 23 cm.

Adjustable battery holder tray plastic

Plastic battery holder tray, it accepts batteries with a maximum length of 28 cm and a width of 18cm while the height ranges from 17 to 23 cm.

Adjustable outboard motor bracket

Adjustable outboard motor bracket.

Manufactured in stainless steel for outboard motors up to 50kgs.

*Maximum load refers to 2-stroke engines

Adlard Coles Logbook

This logbook is not only a convenient place for captains to keep all the specific notes that need constant referral during a long voyage, but also a comprehensive sailing record.

The perfect gift for sailors and boat-owners.

Adriatic Pilot

 

In publication for over thirty years, Adriatic Pilot remains the only single volume to cover the whole region, from Albania and the heel of Italy in the south to Venice and Slovenia in the north. The ever-popular cruising ground of Croatia is covered extensively in four separate chapters.

Air horn canister 300ml

Air horn replacement canister with threaded valve.

Compressed air volume 300ml

Combines with art# 16-0034 air horn head

Air horn head

Screw-on plastic air horn head.

Suitable for art. # 16-0033 canister

Air horn set

Air horn set in blister packing.

Includes art# 16-0033 & 16-0034

Showing 1–60 of 2312 results

X