1 component enamel Top Side / Bootoping Deck
Recommended thinner: LS701
1 component finish Unigloss
One-pack high quality enamel
- Good flexibility and adhesion on a wide range of primers and finishes
- Not applicable directly on galvanized primers
- Available in various colours
- Not suitable for continuous immersion
Theoretical coverage (m²/ LT): 13,5
Recommended thinner: 6470
1 component Yacht enamel
Recommended thinner: LS701
2 component P/U enamel
Recommended thinner: LS745
2-pack polyurethane finish Gel Gloss Pro
A high quality enamel with excellent resistance to marine and industrial environment, to ageing and to ultraviolet rays.
Does not yellow, is very flexible and retains its gloss. Excellent levelling gives improved aesthetic appearance to topsides, decks, superstructures etc. Gel Gloss Pro can be applied directly to gel coats or to epoxy or polyurethane primers (Epoply,Polygoal).
A wide range of colours, which can be blended, is available.
Not suitable for continuous water immersion.
Theoretical coverage (m²/ LT): 13,5
Recommended thinner: 6700 / 6780
For more information please visit Veneziani’s website.
Technical data sheet (TDS):
645
Pro 018
Pro 035
Pro 112
Pro 378
Pro 411
Technical data sheet (TDS):
Pro 519
Pro 664
Pro 708
Pro 715
Pro 762
Pro Catalyst
Adherpox – Primer
Modified two-pack epoxy primer suitable for boat-hulls but also recommended for topsides and superstructures. Adherpox has been formulated for all types of boat building materials (aluminium included). If several coats are applied, this primer provides good corrosion protection. Thanks to its high solids by volume Adherpox complies with VOC-regulations.
A special feature of Adherpox is its extended recoating interval: 3 months when recoated with antifoulings and 6 months when recoated with an additional coat of Adherpox, without sanding.
Theoretical coverage (m²/ LT): 11
Thinner: 6610
For further information please visit Veneziani’s website.
Technical data sheet(TDS)
Antifouling Regatta A/F Speed
Regatta A/F Speed is a high quality hard antifouling paint that meets all applicable environmental standards. It is an antifouling paint that is addressed to yachts whose speed exceeds 30 miles per hour. It is the ideal choice for speedboats. It can be applied on all types of boats, plastic, wood, metal and even on aluminum surfaces, always with the prior application of the appropriate primer per case.
Thinner: LS703
Antifouling Regatta Οptima
Regatta Optima is a high quality self-cleaning reef paint. It is a product that incorporates the latest technologies in the manufacture of reef paints and meets all applicable environmental standards. It is a color aimed at yachts whose maximum speed does not exceed 30 miles per hour.
It is an ideal choice for sailing and cruiser boats. It can be applied on all types of boats, plastic, wood, metal and even on aluminum surfaces, always with the prior application of the appropriate primer per case.
Recommended thinner: LS703
Bilge paint Epifanes
Epifanes Bilge paint is a protecting paint based on modified alkyd resin for use in bilge spaces, engine rooms, etc. where a tough paint system is required. Can be applied over most substrates with one-component primer systems.
Application:
- Fiberglass, steel, wood, aluminum
- Bilges, chain lockers and other wet areas in conjunction with the appropriate primer system
Recommended thinner: Brush thinner for Paint & Varnish Epifanes (SKU: 39-0050, 39-0051)
Theoretical coverage 3-5m²/750ml
Ceramite Yachting
A high-build, odourless epoxy paint which is solvent-free for the internal and external treatment of any surfaces which need to be sealed, such as water tanks, galleys and cool boxes. Used in antiosmosis systems as a sealant for bilge, fore and aft peaks and hidden internal surfaces.
This product is also suitable for use on wood and steel and has a high chemical resistance to fresh and salt water, diesel, oil, and acidic and basic solutions. Ceramite Yachting is easily cleaned with an ordinary liquid detergent as it has a hard, glossy surface.
Theoretical coverage (m²/ LT): 6,7
For further information please visit Veneziani’s website.
Technical data sheet (TDS)
Cupron Plus – Antifouling
Ablative antifouling that is the result of a formulistic evolution guaranteeing an adequate seasonal protection and a universal application on every type of vessel and support.
In order to guarantee a good performance for the season, it is necessary to apply 2 coats of product.
This antifouling is compatible with most undercoats such as Ticoprene and Unikote Pro.
All colours are suitable for aluminium hulls.
Theoretical coverage (m²/ LT): 9
Thinner: 6610
For further information please visit Veneziani’s website.
Technical data sheet (TDS)
Danboline – Top coat for bilges
Danboline protects bilges, lockers and bulkheads against moisture penetration, and wear and tear.
Danboline will resist oil and fuel spillage and cleans easily.
Theoretical coverage (m²/ LT): 11
Thinner: No. 1
Ecoplast – Epoxy coating
Epoxy coating for internal use where there is contact with foodstuffs. Recommended for the treatment of iceboxes, cool boxes, galleys and drinking water containers. This product is certified for use with foodstuffs, in particular drinking water, fresh and refrigerated fish, molluscs, crustaceans, etc. Ecoplast is an odourless, solvent-free product which is easy to apply even in confined areas. This product is a sealant and a barrier paint with a high resistance to chemical agents. Ecoplast conforms to D.M.21/3/1973 (concerning hygiene in packaging, containers and utensils intended to come into contact with foodstuffs) and DM 06/04/2004 n.174 (concerning materials and equipment used in facilities for the containment, treatment, conveyance and distribution of drinking water for human use).
Theoretical coverage (m²/ LT): 6,5
Recommended thinner: (for cleaning only) 6610
For further information please visit Veneziani’s website.
Technical data sheet (TDS)
Epoway – Epoxy primer
Two-pack epoxy undercoat with barrier effect, which can be applied to any kind of substrate (wood, steel, aluminium and GRP). This coating may be used both as barrier coat and as undercoat for enamels.
Can be recoated, after sanding, with two-pack enamels.
Theoretical coverage (m²/ LT): 5
Recommended thinner: 6610
For further information please visit Veneziani’s website.
Technical data sheet (TDS)
Epoxy primer Regatta
EPOXY PRIMER is a 2-component epoxy primer. Provides increased protection both below and above the waterline. Under the waterline it also provides anti-osmotic protection. It can also be used as a base for one or two-component anti-fouling paints. Above the waterline it is an ideal base for 2-component top coats as well as 1 component.
Available in shades of light beige and white.
It is suitable for all types of surfaces, plastic, metal, wood and aluminum.
Recommended thinner: N77
Eurogel – Primer 1 component
White one-pack alkyd undercoat. Easy to apply, has good hiding power and can be used as a mat finish for interiors or as undercoat for alkyd painting systems. Can be applied to aged one-pack alkyd systems and wood after sanding as well as to disc-sanded steel substrates.
Theoretical coverage per coat (m²/ LT): 13,5
For further information please visit Veneziani’s website here.
Eurosprint Next – Antifouling
Hard-matrix antifouling paint with high copper content to ensure excellent protection. Eurosprint is an antifouling suitable for antifouling protection in sea water, brackish water and fresh water.
A hard antifouling, with good abrasion resistance, Eurosprint is recommended for sail boats and fast motor boats (also faster than 35 knots). Can be used for boats made of wood, steel or GRP.
Only the white Eurosprint is suitable for aluminium boats.
Theoretical coverage (m²/ LT): 10
Recommended thinner: 6470
For more information please visit Veneziani’s website.
Safety data sheet (SDS)
Black
White
Deep Blue
Technical data sheet (TDS):
Gummipaint – Enamel for dinghies
Suitable for painting neoprene, rubber fabric, PVC, Hypalon, etc. This product has excellent levelling and flexibility while at the same time maintaining maximum adherence. Gummipaint is highly resistant to the marine environment, to immersion in salt and fresh water and to ultraviolet rays.
Theoretical coverage (m²/ LT): 3,8
Thinner: 6380
For further information please visit Veneziani’s website.
Technical data sheet:
Gummipaint A/F
Gummipaint A/F is a flexible reef color for inflatable boats. This reef paint is very effective due to the perfect flexibility and adhesion, suitable for neoprene, elastic fabric, PVC, Hypalon, and more.
Theoretical coverage (m²/LT): 10
Recommended thinner: 6380
For more information please visit Veneziani’s website.
Technical data sheet (TDS):
Interprotect – Primer 2 components
Interprotect is a high performance two pack primer/undercoat. It’s perfectly formulated for polyester, vinylester, epoxy, steel, aluminum, and timber hulls, above and below the waterline.
Quick drying, easy to apply epoxy primer for high performance protection. Excellent anticorrosive protection and good abrasion resistance.
Interprotect can be used on all suitably prepared substrates and epoxy primers.
Suitable for stainless steel trim tabs and stern drive gear, but it should not be used over any one pack products nor for use on bronze or mixed alloy propellers.
Theoretical coverage (m²/ LT): 9.1 m²/L
Recommended thinner: No. 7
Micron 350 – Antifouling
Micron 350 is a premium antifouling, offering outstanding 2-year protection in all conditions. A new formulation ensures truer colours, while Self-Polishing Copolymer technology delivers consistent performance.
Theoretical coverage (m²/ LT): 9
Thinner: No. 3
Multi Marine Primer Epifanes
A one-part multi purpose tie-coat or sanding and adhesion primer for above the waterline combining all characteristics of separate substrate primers in one.
Application:
This primer offers excellent adhesion to wood, fiberglass, steel, stainless steel, aluminum, galvanized metal, copper and most other bare or painted substrates.
Recommended thinner: Epifanes Brushthinner for Paint & Varnish ή Epifanes Spraythinner for Paint & Varnish
Theoretical coverage 8-10 m²/1000ml
Technical data sheet(TDS):
Nautiforte yacht paint Epifanes
A high gloss one-component finish based on siliconized alkyd resins.
This finish provides outstanding weather durability, long lasting gloss retention, rapid wet film drying, minimal dirt retention and is non-yellowing.
Application:
- Fiberglass, steel, wood, aluminum
- Suitable for interior and exterior use above the waterline in conjunction with the appropriate primer or directly on well degreased and sanded fiberglass
- Brush, roll or spray
Recoatability:
After 24 hours at 18°C
Theoretical coverage 10 m²/750ml
Non-skid Deckcoating – Slip-resistant deck paintEpifanes
Epifanes nonskid Deckcoating is a one-component, semi-gloss, urethane/alkyd based nonskid deckpaint containing a measured amount of polypropylene beads as the nonskid agent.
To ensure best water resistance, apply Nonskid Deckcoating over at least 2 high gloss coats.
Application:
- Application by shorthaired roller provides an even distribution of the beads
- Stir well before and during use
- Allow the final coat at least 72 hours to harden thoroughly
Recommended thinner: Epifanes Brush thinner for Paint & Varnish (SKU: 39-0050, 39-0051)
Theoretical coverage 3-6 m²/750ml
Technical data sheet(TDS):