Anchorage

Showing 1–60 of 262 results

3-strand high tenacity mooring rope – Blue

High tenacity 3-strand polyester, non floating mooring rope.

Ideal for mooring due to easy splicing

Approximate packing measures +/- 5%.

3-strand high tenacity mooring rope – Black

High tenacity 3-strand polyester, non floating mooring rope.

With distinctive white stripe that differentiates it from the medium tenacity

Ideal for mooring due to easy splicing

Approximate packing measures +/- 5%.

3-strand high tenacity mooring rope – White

High tenacity 3-strand polyester, non floating mooring rope.

With distinctive red stripe that differentiates it from the medium tenacity

Ideal for mooring due to easy splicing

Approximate packing measures +/- 5%.

3-strand medium tenacity mooring rope – Black

Medium tenacity, 3-strand, polyester, non floating mooring rope.

Ideal for mooring due to easy splicing

Approximate packing measures +/- 5%.

3-strand medium tenacity mooring rope – White

Medium tenacity, 3-strand, polyester, non floating mooring rope.

Ideal for mooring due to easy splicing

Approximate packing measures +/- 5%.

Anchor bow rollers

Anchor bow rollers are installed to the boat’s bow and is where the anchor is secured when the boat is moving.

There are various options depending on the bow shape and anchor type.

Anchor Chain Lock Gripper – Inox

Made form Cast 316 Stainless Steel.
Designed to be hooked to the chain link, it relieves tension from the chain when in anchorage, and therefore prevents abnormal loads on the windlass.

Easy to disengage.

Anchor chain markers

Indicators of different colors for marking the chain.

Available for chains from 6mm to 12mm.

Available colours:

  • White (W)
  • Blue (B)
  • Green (G)
  • Red (R)
  • Κίτρινο (Υ)

To place your order use the article refering to the mm of the chain plus the colour you want.

E.g. for chain markers 6mm in red colour the correct SKU is 03-0034-R

Anchor chain recovery trip hook

This hook helps to retrieve the boat’s anchor chain when for some reason this is not possible with other means for example entanglement on a underwater obstacle or breaking of the rope.

Is also used in case an anchor, during anchor retrieval, catches an other boat’s chain. The situation is easily surpassed by applying the steps shown in the schematic.

Anchor Nord kit aluminum

 

Nord anchor weighing 1kg made of anodized aluminum, with rope and galvanized chain 0.5m long.

It has excellent grip and performance, but at the same time easy and quick assembly.

Ideal solution for use in inflatable boats, kayaks and boats up to 12′.

Angular anchor bow roller articulated

Anchor bow rollers are installed to the boat’s bow and is where the anchor is secured when the boat is moving.

There are various options depending on the bow shape and anchor type.

Angular anchor bow roller fixed

Anchor bow rollers are installed to the boat’s bow and is where the anchor is secured when the boat is moving.

There are various options depending on the bow shape and anchor type.

Ankarolina mooring reel

Ankarolina mooring reel used for anchoring, mooring or docking.

Stable but light solution, easy to handle.

Bow fender

The fender can be used as bow protection from the anchor on sailing boats.

Bow thruster – Dual propeller

Dual propeller bow thruster. For bow control during docking maneuvers.

The duo – prop design delivers sufficient thrust for heavy or long (up to 30m – 100 ft) boats

To download the manual and the cut-out template for the installation of the bow thruster click here and find your product from the list.

Bow thruster – Single propeller

Single propeller bow thruster. For bow control during docking maneuvers. Designed for small and medium size (from 5m – 15ft up to 15m – 50ft) boats.

To download the manual and the cut-out template for the installation of the bow thruster click here and find your product from the list.

  

Bow thruster connection cable


Bow thruster connection cable.

  • Attaches to the cockpit controller
  • Complete with connection terminals
  • Suitable also for stern thrusters

Bow thruster control panels – MAX POWER

Max Power control panels for bow thrusters.

Two types: one with push buttons and one with joystick

IP66 waterproof

Bow thruster controllers – QUICK

Quick bow thruster controllers.

Available in 3 types: Push button, single or double joystick.

ΙP66 waterproof

Bow thruster replacement propellers

Bow thruster replacement propellers.

In 3 sizes 140mm, 185mm and 250mm. The 140mm is for single prop bow thrusters.

The 185 & 250mm are for duo prop thrusters and come in 2 types each depending on the direction of the rotation.

Braided cord – solid color – Black

Very high strength polyester cord.

Suitable for fishing as well as for various on board tasks such as flag pole rope or outboard engine starter cord

Braided cord – solid color – White

Very high strength polyester cord.

Suitable for fishing as well as for various on board tasks such as flag pole rope or outboard engine starter cord

Braided rope – White with colored insert

Braided, 24-strand, polyester utility rope.

Non floating, is the most popular rope for light duty tasks around and off the boat.

 

Approximate packing measuring + / – 5%

 

 

Braided rope – solid color

Polyester, 24-strand, braided rope.

Non floating, general purpose, suitable for all light duty tasks on and off board

Approximate packing measuring + / – 5%

Britany type anchor galvanized

Britany is the only flat anchor with a shank designed not to foul, thus preventing the anchor from breaking away. It bites into the seabed within seconds.

Instant biting into the sea bed :

  • To prevent potential fouling, the Britany has no large crown.
  • To avoid clogging by pebbles, the Britany has no link cage.
  • Thin flukes with sharp edges : ensures quick digging even in the hardest sea beds.
  • Geodynamic flukes, ensuring easy burial and perfect holding.
  • High resistance shank, cast in one piece : gives perfect resistance even to a strong lateral pull.
  • Narrow crown, designed to lift the rear of the anchor, so that the flukes dig in immediately.

Bruce type anchor galvanized

The most common claw type anchor. Its special construction, with the one-piece stem and the base with the 3 fins, make it a great choice for anchoring in places with sandy bottom.

Bruce type anchor Ιnox

The most common claw type anchor. Its special construction, with the one-piece stem and the base with the 3 fins, make it a great choice for anchoring in places with sandy bottom.

Chafe cover for ropes Fendress

Rope protector socks to minimize chafing and wear of fender and mooring lines.

Hand made in France from high quality UV stabilized acrylic fabric.

Full length heavy duty Velcro fastening enables the rope sock to remain in place in difficult conditions.

Chafe cover for ropes with velcro

Rope protector socks to minimize chafing and wear of fender and mooring lines.

Full length heavy duty Velcro fastening enables the rope sock to remain in place in difficult conditions.

 

Chain counter QNC CHC Quick

 

QNC CHC is a complete and reliable tool to remotely operate the windlass and check the length of the lowered chain by means of the colour graphic display.

The panel surface is completely black tempered glass.

 

Characteristics:

  • Automatic descent function
  • Up alarm function
  • Anchor weighing function in case of sensor failure
  • Windlass management with auto free fall
  • Display of the lowered chain length, in metres, feet and fathom
  • Glass front, extremely thin profile
  • Capacitive keys
  • High brightness 3.5” colour graphic display
  • Multilingual user interface
  • Power supply 12/24 Vdc
  • Functioning over a wide range of environmental temperatures
  • Protection rating IP67
  • CAN bus Communication Interface

 

Manual:

 

Chain counter Smart CHC Quick

SMART CHC is the ideal chain counter for small boats (e.g. boats with outboard motor).

  • Displays the chain lowered in metres or feet. Compatible only on ON/OFF systems
  • Configurable on Smartphone (NFC technology) using a dedicated APP, both iOs and Android
  • 1.44” TFT colour display. Readable even in bright light

Manual:

Chain DIN 764 – galvanized

DIN 764 link chain (medium size link) for general use mainly in permanent anchorage.

Hot dipped galvanized offers higher resistance to oxidation due to exposure to the sea environment.

Smaller sizes can be use to the auxiliary anchor where launching and retrieving are done manually.

Medium and larger sizes are ideal solution for permanent anchorage thanks to the wider link which allows the attachment of shackles.

Chain DIN 764 – Inox

Stainless steel aisi 316 DIN 764 link chain.

Medium length link chain can find many uses around the boat and also due to it’s finish is perfect for decorating projects.

Chain DIN 766 Calibrated – galvanized

Calibrated DIN 766 link chain made in Italy. Hot dipped galvanized.

The term “Calibreted” states that every single link of the chain has been processed with very specific way, resulting that all links would have the exact same dimensions and are in accordance with specific safety standards, with minimum approved deviations, in this case DIN 766.

This feature makes these chains the right choice for use in windlasses where smooth operation is required.

These particular chains have, and only in sizes 10mm and 14mm, 2 types of link length.

Quality certifications are available upon request.

Chain Inox DIN 766

Chain made from aisi 316 stainless steel. Meets all the dimensional specifications of DIN 766, in superior quality stainless steel.
Excellent finish and great durability combined with the ability to use on a windlass.

Chain stopper inox 316 8-10mm

 

Chain stopper that helps prevent damage to your boat’s windlass.

Made of aisi 316 stainless steel to resist the conditions of the marine environment.

Compatible with all types of anchor rollers.

Chain to rope connector

Connects the chain with the rope.

Simple and fast without the usage of complicated of difficult to use equipment.

Manufactured of stainless steel

Contactor – Solenoid Unit for windlass Quick

The contactor and reversing contactor solenoid units T6315 or T6415 are able to operate electric motors for windlasses and capstans. Thanks to their external connections, they are very easy to install.
Degree of casing protection IP66 (Excluding terminals).

Contactor – Solenoid Unit for windlass Taiwan

The contactor (3 contacts) and reversing contactor (4 contacts) units are able to operate electric motors for windlasses and capstans. Thanks to their external connections, they are very easy to install.

Showing 1–60 of 262 results

X