Adherglass is a primer which is based on synthetic polymers. It is a one-pack primer providing good adhesion and suitable for use on gel coats, GRP and epoxies such as Epoway and Aquastop.
Adherglass is quick-drying and is used principally as a primer for antifouling on GRP or on new or stripped gel coats.
The surface does not require sanding to guarantee good adhesion, but must be thoroughly degreased.
Theoretical coverage (m²/ LT): 13.3
Recommended thinner: (for cleaning only) 6780
For further information please visit Veneziani’s website.
Technical data sheet:
Safety data sheet:
Modified two-pack epoxy primer suitable for boat-hulls but also recommended for topsides and superstructures. Adherpox has been formulated for all types of boat building materials (aluminium included). If several coats are applied, this primer provides good corrosion protection. Thanks to its high solids by volume Adherpox complies with VOC-regulations.
A special feature of Adherpox is its extended recoating interval: 3 months when recoated with antifoulings and 6 months when recoated with an additional coat of Adherpox, without sanding.
Theoretical coverage (m²/ LT): 11
Thinner: 6610
For further information please visit Veneziani’s website.
Technical data sheet(TDS)
Aquastop is designed specifically for the treatment of GRP boats affected by OSMOSIS and is particularly recommended as a preventative, protective treatment. This product is water resistant (both sea and fresh water), making the boat highly impermeable, and forms an effective barrier layer for submerged metal parts (keels, flaps, rudders, etc.).
Theoretical coverage (m²/ LT): 5
Recommended thinner: (for cleaning only) 6610
For further information please visit Veneziani’s website.
Technical data sheet (TDS)
Two-pack epoxy undercoat with barrier effect, which can be applied to any kind of substrate (wood, steel, aluminium and GRP). This coating may be used both as barrier coat and as undercoat for enamels.
Can be recoated, after sanding, with two-pack enamels.
Theoretical coverage (m²/ LT): 5
Recommended thinner: 6610
For further information please visit Veneziani’s website.
Technical data sheet (TDS)
EPOXY PRIMER is a 2-component epoxy primer. Provides increased protection both below and above the waterline. Under the waterline it also provides anti-osmotic protection. It can also be used as a base for one or two-component anti-fouling paints. Above the waterline it is an ideal base for 2-component top coats as well as 1 component.
Available in shades of light beige and white.
It is suitable for all types of surfaces, plastic, metal, wood and aluminum.
Recommended thinner: N77
White one-pack alkyd undercoat. Easy to apply, has good hiding power and can be used as a mat finish for interiors or as undercoat for alkyd painting systems. Can be applied to aged one-pack alkyd systems and wood after sanding as well as to disc-sanded steel substrates.
Theoretical coverage per coat (m²/ LT): 13,5
For further information please visit Veneziani’s website here.
A two-pack polyurethane primer for wood with excellent sealing properties. It’s deep penetration makes the surface highly impermeable and hard. This product is recommended for use mainly on new or stripped wood.
When correctly applied in a single coat it does not form a film but penetrates into the surface. In colourless version it does not alter the original colour of the wood and does not yellow with age.
This product can be painted over with a wide range of products such as Eurogel, Epoway, Resina 2000, Ticoprene, Timber Gloss, Wood Gloss, Wood Mat.
Theoretical coverage (m²/ LT): 12,5
For further information please visit Veneziani’s website.
Technical data sheet (TDS)
A quick drying, high performance, two-component epoxy for application to sound gelcoats to help protect against osmosis.
Gelshield is provided in two shades (green and grey) to ensure complete coverage by alternating coats.
Suitable for use in temperatures down to 5°C. Area Above and below the waterline.
Theoretical coverage (m²/ LT): 9,1
Thinner: No. 7
Interprotect is a high performance two pack primer/undercoat. It’s perfectly formulated for polyester, vinylester, epoxy, steel, aluminum, and timber hulls, above and below the waterline.
Quick drying, easy to apply epoxy primer for high performance protection. Excellent anticorrosive protection and good abrasion resistance.
Interprotect can be used on all suitably prepared substrates and epoxy primers.
Suitable for stainless steel trim tabs and stern drive gear, but it should not be used over any one pack products nor for use on bronze or mixed alloy propellers.
Theoretical coverage (m²/ LT): 9.1 m²/L
Recommended thinner: No. 7
Adhesion primer for metal. It adheres perfectly on stainless steel, bronze and aluminium.
Only one coat must be applied.
Roughen well the surface before application, sanding it with coarse sandpaper.
For further information please visit Marlin Yacht Paint’s website.
A one-part multi purpose tie-coat or sanding and adhesion primer for above the waterline combining all characteristics of separate substrate primers in one.
Application:
This primer offers excellent adhesion to wood, fiberglass, steel, stainless steel, aluminum, galvanized metal, copper and most other bare or painted substrates.
Recommended thinner: Epifanes Brushthinner for Paint & Varnish ή Epifanes Spraythinner for Paint & Varnish
Theoretical coverage 8-10 m²/1000ml
Technical data sheet(TDS):
Recommended thinner: LS703
Polygoal is a two-pack, high-build polyacrylic undercoat with excellent performance. Easy to sand and therefore especially suitable as undercoat for top grade enamels. Since it is high-build, even one coat is helpful to cover possible micro-porosities of the substrate.
It can be applied to previously sanded epoxy primers or fillers and also directly to properly sanded GRP or gel-coat. Polygoal is an excellent undercoat which enhances the gloss of polyurethane finishes.
Theoretical coverage (m²/ LT): 6,5
Thinner: 6780
Primocon is a fast drying, one-part primer for use below the water line before antifouling is applied.
Formulated for timber, steel, aluminium, cast iron keels and lead keels.
Theoretical coverage (m²/ LT): 7.4
Thinner: No. 3
A one-pack primer for Propeller antifouling, based on synthetic resins, which adheres well to metal and alloys in general.
Especially formulated to provide the adhesion of the antifouling Propeller, it can be used for all underwater metal parts which need to be protected against fouling such as propellers, shafts, flaps, etc. An improved primer which is quick drying, has good anti corrosion properties and is easy to use.
Theoretical coverage (m²/ LT): 16
For further information please visit Veneziani’s website.
Technical Data Sheet(TDS)
RED LEAD EXTRA STRONG ORANGE is an primer for wooden surfaces. With high absorbency, it penetrates deep and protects all wooden parts. Especially used in the construction parts of traditional wooden boats. It is used to provide better water resistance properties.
Recommended thinner: LS701
Rust Primer is an alkyd primer for final one-component paints.
Effective on all properly prepared surfaces, it offers high levels of antioxidant protection.
Recommended thinner: LS701
Ticoprene is a one-pack chlorinated rubber primer pigmented with aluminium flakes, an all-purpose primer for the marine environment, suitable for maintenance painting of wood and steel boat hulls and structures. It can be applied also to zinc primers as well as to one-pack and two-pack primers. Well suited as a sealer for old antifoulings. Ticoprene provides good protection to parts immersed in salt and freshwater.
Theoretical coverage (m²/ LT): 8,5
Thinner: 6470
For further information please visit Veneziani’s website.
Technical data sheet:
Undercoat Epifanes is a one-component primer and undercoat based on a urethane/alkyd resin. For use in a one-component paint system above the waterline.
Provides maximum adhesion on previously painted, and well degreased and sanded one component paint systems.
Suitable for interior and exterior use. Recoatable with all Epifanes one-component products.
Recommended thinner: Epifanes Brushthinner for Paint & Varnish ή Epifanes Spraythinner for Paint & Varnish
Theoretical coverage 8-10 m²/1000ml
Technical data sheet(TDS):