Ø180mm with thread Μ14.
Technical specifications:
Lithium-Ion-battery: 12V, 1500mAh
No load speed: 0-3000rpm
Disc size: 80mm
Weight: 0,8kg
Included:
Scotch-Brite™ Bristle Disc, using ceramic abrasive grain and molded, flexible bristles, provides more surface contact than wire brushes and maintains abrasive property throughout the life of the disc. The fast-running disc removes paint, stains, adhesives, weld burns, rust, heavy oxides, and surface contaminants from large areas.
Thread size M14
Available in two different hardness levels P50 green(24537) or P80 yellow(24538).
Technical data sheet:
Quickly removes lines created during polishing.
The result is a high quality gloss.
Best used with sponge 50388.
NanoPro GS100 glass sealant is a coating material based on nano technology.
It produces a very good drip off behaviour of watery and oily fluids and makes easier the removal of dirt and lime residues of sanitary ceramic or glass.
Bacteria, algae and dirt do not find a wash primer on the sealed surface and therefore are easier to remove.
Apply with a cloth on a clean surface and then wipe with a microfiber cloth.
Marine Compound and Finishing Material removes scratches, oxidation, stains, swirl marks and other blemishes that are robbing your boat of its beauty. This “two-in-one” compound and polish eliminates common imperfections from fiberglass and marine gel coats.
Safety data sheet:
3M™ Marine Finesse-it II Finishing Material restores the beauty of boats by eliminating minor scratches and light oxidation. This wax-free, silicone-free formula produces a smooth, glossy surface that almost looks wet. Using this product is highly recommended after compounding to eliminate light scratches and swirl marks or whenever it’s time to rejuvenate the gloss finish on a boat.
3M™ Marine Finesse it II Finishing Material removes micro fine scratches and swirl marks that occur while sanding and compounding. Wax free, silicone free formula creates a silky smooth finish that’s free of common surface imperfections.
Safety data sheet:
Metal Restorer and Polish restores the sparkle and shine on metals throughout boats. This polish rejuvenates the beauty of metals by removing surface rust, oxidation, corrosion and tarnish. This easy-to-use paste brings back the original luster to make metals look new again.
High-cutting and shining compound just created for removing, in the fastest way, marks and P600-800 sand scratches according to the hardness of treated resins, including the swirls caused by roto orbital sander.
It has a rapid glossy action both on bottoms and on moulds. It removes scratches and marks and it leaves no haze and grease on the surface; It leaves a deep and clear shine that lasts for a long time.
It is widely appreciated, as it allows the user to cut and shine in only one step, without overheating the surface. This compound is not dangerous for health and environment and has low solvent emissions
Perfect-It™ Boat Wax is the final, brilliant step in achieving a truly professional marine finish. Its blend of pure Brazilian carnauba wax, silicones, polymers and resins brings out an extraordinary gloss and provides durability against the elements.
The liquid wax formula is easy to apply and remove even on warm surfaces, and is safe for gelcoat, paint, fiberglass and metal.
Aggressive,rubbing and polishing compound that removes oxidation and deep scratches from all types of paints including last generation and conventional.
Uses last generation micro abrasives. Contains no wax or silicone.
Leaves a surface ready for finishing. Can be used either with woolpad or foam pad in combinations for variable cutting action. Very quick and easy to use.
Gloss restorer that removes light oxidation and superficial yellowing;
It provides high-quality finishing. This is a combination of micro-abrasives and gloss agents that is very quick and easy to use
It restores and maintains the original deep shine of the surface. This water-based compound is not dangerous for health and environment
Use 3M™ Perfect‐It™ Fast Cut Compound to remove sanding scratches after flatting or denibbing processes (with 3M 260L P1200 / P1500 or 3M Microfine 1500 / 2000 wet sanding paper).
3M™ Perfect‐It™ Fast Cut Compound delivers a fine, high gloss to both fresh and aged paintwork. It is a fast acting coarse grade compound, to be used by machine it in a variety of processes as first compounding step. The complimentary pad colour to be used is i.e. orange. Following this process, you will need to work with a finer product to achieve a high gloss final finish. Suitable are 3M™ Perfect‐It™ Fine Compound or 3M™ Perfect‐It™ High Gloss Machine Polish with a black waffle pad.
Technical data sheet:
Use 3M™ Perfect‐It™ Fast Cut Plus Extreme to remove sanding scratches after flatting or denibbing processes (with 3M 260L P1200 / P1500 or 3M Microfine 1500 / 2000 wet sanding paper). Part of 3M™s colour coded range of compounds, this product is to be used with a green pad.
Technical data sheet:
Use 3M™ Perfect‐It™ Finishing Glaze for a high gloss and lasting protective shine on refinish or original paint surfaces finished by 3M™ Perfect‐It™ Paint Finishing System. Apply our glaze by hand with a soft wipe, or for more efficiency, by machine with a dual action sander.
3M™ Perfect‐It™ Finishing Glaze gives a high lustre on refinish or original paint surfaces and contains carnauba wax to provide a lasting protection to the finish provided by the 3M™ Perfect‐It™ Paint Finishing System. Finishing Glaze contains paint shop compatible silicones to ensure ease of use without any risk of contamination.
Technical data sheet:
Apply by hand or with a dual action sander, for a durable shine and protection to fresh and original paint surfaces.
Technical data sheet:
Restore oxidized paint to a high lustre, remove blend lines and fine grade flattening scratches – all with 3M™ Perfect‐It™ Fine Compound. Use on fresh automotive paint. The compound is ideal for use on gelcoats, and perfect for two pack paint systems. You can also use it to remove heavy overspray.
Technical data sheet:
Use 3M™ Perfect-It™ Machine Polish with 3M™ Perfect-It™ Foam Polishing Pads, to quickly remove compound swirl marks and achieve a high gloss finish. Our high performance polish is easy to use and ensures cleaning up is quick and efficient.
3M™ Perfect‐It™ Machine Polish removes compound swirl marks efficiently and gives a high gloss finish. Use our high performance polish with 3M™ Perfect‐It™ Foam Polishing Pads to quickly and easily eradicate imperfections – for an outstanding finish. Our polish is easy to use and ensures cleaning up is quick and efficient.
Technical data sheet:
Fine polishing compound with wax and polymers for Gelcoat, Polyurethane paints and varnishes. Removes scratches and imperfections as well as polishing marks.
Water-based polishing rubbing compound that removes and dissolves rust and light oxidation, chalk, fading and light scratches on steel surfaces.
It shines and leaves a long-lasting protection that withstands natural elements for a good boat maintenance and care. It is generally used by hand.
Directions for hand use:
Shake the bottle before use. Pour on a cotton cloth, spread it on the surface with circular movements. Let it dry for a while and then remove with a clean buffer.