Valves

Showing all 14 results

Ball Valve Bronze Italy

Bronze body F.F. full port ball valve with stainless steel handle.

Ball valve plastic Trudesign

 

TruDesign Ball Valves are designed and made in New Zealand for use in marine applications above and below the water line.

  • Manufactured from a glass-reinforced nylon composite – High strength and light weight
  • Immune to corrosion and electrolysis – Long life with no concerns over decreased performance due to corrosion
  • Chemical resistant – Impervious to diesel, petrol and antifouling paints
  • UV resistant – Will not degrade or discolor with ultraviolet light from the sun
  • Large operating temperature range (-40° to +110°C)
  • High quality surface finish – Will not discolor with green film as similar bronze fittings do

ISO 9093-2 and ABYC H27 Certified

Manual:

Ball valve spanners Trudesign

  • Manufactured from a glass reinforced nylon composite – High strength and light weight.
  • Immune to corrosion and electrolysis – Long life with no concerns over decreased performance due to corrosion.
  • Chemical resistant – Impervious to diesel, petrol and antifouling paints.
  • UV resistant – These fittings will not break down with ultraviolet light or discolour from the sun.
  • High quality surface finish – Will not discolour with green film as similar bronze fittings do.
  • Large operating temperature range – Suitable for all marine environments, from -20°C to +110°C.

Ball Valve Ιnox 316

Full port ball valve made in stainless steel with stainless steel handle.

Load bearing Trudesign

 

TruDesign load bearing collars are designed for use with Trudesign skin fittings and ball valves.
With the collar in place, the skin fitting-ball valve-hose tail assembly will withstand a 500 lb (227 kg) static force applied to the Hose Tail end of the assembly, for a minimum of 30 seconds – complying with North American ABYC H-27 standards.

 

Note: Trudesign 2″ skin fittings meet the requirements of H-27 500Lb standard (i.e. without a Large Collar installed). Adding a large collar to assemblies of this size increases the overall strength and protects the vulnerable exposed section of thread on the Skin Fitting.

Y-Valve Jabsco

  • Jabsco plastic three-way valve. It also has a locking feature to prevent accidental change of lever position.
  • Handle extension for Jabsco Y-valve. It has 6 cm length and allows the installation and operation of the valve Y through bulkhead.
  • Spare handle for Jabsco Y-valve.

Y-Valve plastic 1-1/2″ Trudesign

 

Manufactured from a glass reinforced nylon composite. High strength and light weight, will not corrode in salt laden air.

Easy installation, with a range of straight, 90° and 120° tails, and two seal options, plumbing in confined spaces is made easy.

Pressure tested. All valves are pressure tested to ensure quality and safety in respect to sealing and operation.

The Aquavalve® is the only valve on the market today with smooth movement and an excellent seal with good wear resistance.

Large operating temperature range, suitable for all marine environments, from -40°C to +110°C.

Showing all 14 results

X