Lightspeed – Antifouling Propspeed
Underwater lights are just as susceptible to marine fouling as any other underwater surface which can result in reduced visible light, and efforts to remove barnacles can result in damaged lighting components. Lightspeed has been endorsed by Lumishore and is a transparent coating that is an easy and affordable way for boat owners to reduce maintenance, protect their investment, and maintain lighting system performance. Lightspeed has been shown to save three times its retail value in maintenance costs, on top of the unquantifiable damage to marine ecosystems caused by traditional antifouling products.
The kit includes:
- Lightclean wipe
Lightclean has been specially formulated to remove impurities, grease and contaminants from the light surface. The Lightclean solution comes pre-packaged with a wipe to make your job easier. - Application brush
A small, high quality brush is included to provide the best result during the application of the Lightspeed coating. - Clear coat 15ml
This kit contains 15ml of Lightspeed Clear Coat, a non-toxic, silicone topcoat which forms a super slick outer layer that marine growth cannot adhere to, keeping your lights shinning bright.
Coverage rate for a 15ml kit: 1ft² / 0.1 m²
Technical data sheet:
Safety data sheet:
Propclean wipes Propspeed
Propclean is the first step in the Propspeed application process. The denatured alcohol in Propclean ensures that the metal surface is now completely free of contaminants and ready for Propprep.
1 Propclean wipe will clean a propeller of approximately 33-66cm, or 13-24″, in size.
Technical data sheet (TDS):
Safety data sheet (SDS):
Propprep wipes Propspeed
Propprep is a critical step in the chemical preparation of the metal surface for Propspeed.
1 Propprep wipe will clean a propeller of approximately 33-66cm, or 13-24″, in size.
Technical data sheets (TDS):
Safety data sheets (SDS):
Propspeed kit propeller A/F
With an ultra-slick topcoat, Propspeed is specially formulated to prevent marine growth from bonding to metal surfaces below the waterline. It is proven to increase boat efficiency, reduce drag and save fuel and maintenance costs. It features an exceptionally strong chemical and mechanical bond between the metal substrate, the Etching Primer and the Clear Coat– ensuring that the Propspeed coating actually sticks to your running gear and performs season after season.
Propspeed also reduces the risk of corrosion by electrically isolating the metal, as well as limiting the exchanges between the ions and the gases contained in the water and the metal. In short, if a reaction can’t occur, there will be no corrosion!
The Propspeed system is best used on propellers, shafts, struts, rudders, trim tabs, keel coolers, bow and stern thrusters, pod drives, sail drives and other underwater metal.
Coverage guide:
For more information please visit Propspeed’s website by clicking here.
Transducer’s antifouling Foulfree kit Propspeed
For more information please visit Propspeed’s website.
Technical data sheet (TDS):
Safety data sheet (SDS):
