Adherglass – Primer
Adherglass is a primer which is based on synthetic polymers. It is a one-pack primer providing good adhesion and suitable for use on gel coats, GRP and epoxies such as Epoway and Aquastop.
Adherglass is quick-drying and is used principally as a primer for antifouling on GRP or on new or stripped gel coats.
The surface does not require sanding to guarantee good adhesion, but must be thoroughly degreased.
Theoretical coverage (m²/ LT): 13.3
Recommended thinner: (for cleaning only) 6780
For further information please visit Veneziani’s website.
Technical data sheet:
Safety data sheet:
Eurogel – Primer 1 component
White one-pack alkyd undercoat. Easy to apply, has good hiding power and can be used as a mat finish for interiors or as undercoat for alkyd painting systems. Can be applied to aged one-pack alkyd systems and wood after sanding as well as to disc-sanded steel substrates.
Theoretical coverage per coat (m²/ LT): 13,5
For further information please visit Veneziani’s website here.
Metal primer Velox
Adhesion primer for metal. It adheres perfectly on stainless steel, bronze and aluminium.
Only one coat must be applied.
Roughen well the surface before application, sanding it with coarse sandpaper.
For further information please visit Marlin Yacht Paint’s website.
Multi Marine Primer Epifanes
A one-part multi purpose tie-coat or sanding and adhesion primer for above the waterline combining all characteristics of separate substrate primers in one.
Application:
This primer offers excellent adhesion to wood, fiberglass, steel, stainless steel, aluminum, galvanized metal, copper and most other bare or painted substrates.
Recommended thinner: Epifanes Brushthinner for Paint & Varnish ή Epifanes Spraythinner for Paint & Varnish
Theoretical coverage 8-10 m²/1000ml
Technical data sheet(TDS):
Platin Primer for antifouling
Recommended thinner: LS703
Primocon – Primer
Primocon is a fast drying, one-part primer for use below the water line before antifouling is applied.
Formulated for timber, steel, aluminium, cast iron keels and lead keels.
Theoretical coverage (m²/ LT): 7.4
Thinner: No. 3
Propeller primer
A one-pack primer for Propeller antifouling, based on synthetic resins, which adheres well to metal and alloys in general.
Especially formulated to provide the adhesion of the antifouling Propeller, it can be used for all underwater metal parts which need to be protected against fouling such as propellers, shafts, flaps, etc. An improved primer which is quick drying, has good anti corrosion properties and is easy to use.
Theoretical coverage (m²/ LT): 16
For further information please visit Veneziani’s website.
Technical Data Sheet(TDS)
Rust primer
Rust Primer is an alkyd primer for final one-component paints.
Effective on all properly prepared surfaces, it offers high levels of antioxidant protection.
Recommended thinner: LS701
Ticoprene – Primer
Ticoprene is a one-pack chlorinated rubber primer pigmented with aluminium flakes, an all-purpose primer for the marine environment, suitable for maintenance painting of wood and steel boat hulls and structures. It can be applied also to zinc primers as well as to one-pack and two-pack primers. Well suited as a sealer for old antifoulings. Ticoprene provides good protection to parts immersed in salt and freshwater.
Theoretical coverage (m²/ LT): 8,5
Thinner: 6470
For further information please visit Veneziani’s website.
Technical data sheet:
Undercoat primer Epifanes
Undercoat Epifanes is a one-component primer and undercoat based on a urethane/alkyd resin. For use in a one-component paint system above the waterline.
Provides maximum adhesion on previously painted, and well degreased and sanded one component paint systems.
Suitable for interior and exterior use. Recoatable with all Epifanes one-component products.
Recommended thinner: Epifanes Brushthinner for Paint & Varnish ή Epifanes Spraythinner for Paint & Varnish
Theoretical coverage 8-10 m²/1000ml
Technical data sheet(TDS):
