Adherpox – Primer
Modified two-pack epoxy primer suitable for boat-hulls but also recommended for topsides and superstructures. Adherpox has been formulated for all types of boat building materials (aluminium included). If several coats are applied, this primer provides good corrosion protection. Thanks to its high solids by volume Adherpox complies with VOC-regulations.
A special feature of Adherpox is its extended recoating interval: 3 months when recoated with antifoulings and 6 months when recoated with an additional coat of Adherpox, without sanding.
Theoretical coverage (m²/ LT): 11
Thinner: 6610
For further information please visit Veneziani’s website.
Technical data sheet(TDS)
Epoway – Epoxy primer
Two-pack epoxy undercoat with barrier effect, which can be applied to any kind of substrate (wood, steel, aluminium and GRP). This coating may be used both as barrier coat and as undercoat for enamels.
Can be recoated, after sanding, with two-pack enamels.
Theoretical coverage (m²/ LT): 5
Recommended thinner: 6610
For further information please visit Veneziani’s website.
Technical data sheet (TDS)
Epoxy primer Regatta
EPOXY PRIMER is a 2-component epoxy primer. Provides increased protection both below and above the waterline. Under the waterline it also provides anti-osmotic protection. It can also be used as a base for one or two-component anti-fouling paints. Above the waterline it is an ideal base for 2-component top coats as well as 1 component.
Available in shades of light beige and white.
It is suitable for all types of surfaces, plastic, metal, wood and aluminum.
Recommended thinner: N77
Fibrodur – Sealing primer for wood
A two-pack polyurethane primer for wood with excellent sealing properties. It’s deep penetration makes the surface highly impermeable and hard. This product is recommended for use mainly on new or stripped wood.
When correctly applied in a single coat it does not form a film but penetrates into the surface. In colourless version it does not alter the original colour of the wood and does not yellow with age.
This product can be painted over with a wide range of products such as Eurogel, Epoway, Resina 2000, Ticoprene, Timber Gloss, Wood Gloss, Wood Mat.
Theoretical coverage (m²/ LT): 12,5
For further information please visit Veneziani’s website.
Technical data sheet (TDS)
Gelshield 200 – Antiosmosis treatment
A quick drying, high performance, two-component epoxy for application to sound gelcoats to help protect against osmosis.
Gelshield is provided in two shades (green and grey) to ensure complete coverage by alternating coats.
Suitable for use in temperatures down to 5°C. Area Above and below the waterline.
Theoretical coverage (m²/ LT): 9,1
Thinner: No. 7
Interprotect – Primer 2 components
Interprotect is a high performance two pack primer/undercoat. It’s perfectly formulated for polyester, vinylester, epoxy, steel, aluminum, and timber hulls, above and below the waterline.
Quick drying, easy to apply epoxy primer for high performance protection. Excellent anticorrosive protection and good abrasion resistance.
Interprotect can be used on all suitably prepared substrates and epoxy primers.
Suitable for stainless steel trim tabs and stern drive gear, but it should not be used over any one pack products nor for use on bronze or mixed alloy propellers.
Theoretical coverage (m²/ LT): 9.1 m²/L
Recommended thinner: No. 7
Multi Marine Primer Epifanes
A one-part multi purpose tie-coat or sanding and adhesion primer for above the waterline combining all characteristics of separate substrate primers in one.
Application:
This primer offers excellent adhesion to wood, fiberglass, steel, stainless steel, aluminum, galvanized metal, copper and most other bare or painted substrates.
Recommended thinner: Epifanes Brushthinner for Paint & Varnish ή Epifanes Spraythinner for Paint & Varnish
Theoretical coverage 8-10 m²/1000ml
Technical data sheet(TDS):
Polygoal – Primer
Polygoal is a two-pack, high-build polyacrylic undercoat with excellent performance. Easy to sand and therefore especially suitable as undercoat for top grade enamels. Since it is high-build, even one coat is helpful to cover possible micro-porosities of the substrate.
It can be applied to previously sanded epoxy primers or fillers and also directly to properly sanded GRP or gel-coat. Polygoal is an excellent undercoat which enhances the gloss of polyurethane finishes.
Theoretical coverage (m²/ LT): 6,5
Thinner: 6780