Automatic bilge pump Sahara Attwood
Combine sturdiness, simplicity of use and high efficiency:
- Motor is automatically operated by a reliable mechanical float switch (non toxic ; contains no mercury).
- Shaft seal and caulked wiring provide extra protection to the motor, preventing leak paths. The free flow of water around the motor housing keeps motor cool for extended life.
- 316 stainless steel motor shaft for saltwater corrosion resistance. Steel reinforced motor shaft ensures perfect alignment of shaft and seal, thus preventing leaks.
- Durable impeller is made of tough, high-impact, glass filled polyester.
- Re-enforced filter for optimum protection of the impeller.
- Test knob allows for easy and immediate operational check without disassembly.
- Compact size and low-profile design allow installation in tight places.
Sahara Mk2 is the only automatic bilge pump that eliminates air-locks. Its engineered performance forces air bubbles trapped in the hose and underside of the pump out of the pipework, so that the pump will not run dry and burn out. This breakthrough technology makes Sahara Mk2 the most reliable automatic bilge pump in freshwater and saltwater applications.
Brochure: Datasheet:
Battery charger 24V 60Α Quick
- 3-stage charging curve IUoU
- 3 charging outputs for independent charging of several batteries by integrated charging current distributor
- Each output is protected with integrated fuses
- Compatible with acid, AGM and gel batteries
- Temperature-dependent ventilation system
- Multivolt input: 83 – 264 V AC, 45 – 66 Hz
- Protective devices: overload, overvoltage, overheating, short circuit
Bilge blower TMC
CE Certified
ISO 8846 MARINE (Ignition Protect)
Bilge pump auto-eye series TMC
Pump with integrated electronic float switch – sensor for automatic operation.
Ideal for places where due to lack of space the use of a separate float switch is difficult.
Auto-eye pumps are built with compact, efficient, long life motor, rust and corrosion protected stainless steel shaft and high-impact durable plastic housing.
Quick release strainer for easy cleaning.
Bilge pump bell type TMC
Bilge pumps T02 series and T20 series.
Articles 17-0009 and 17-009-1 are Τ20 series.
CE Certified
Bilge pump cylinder TMC
Submersible bilge pump
- Heavy duty design
- Permanent magnet motor
- Corrosion resistant plastic housing
- Simple snap-off base strainer for easy inspection & cleaning
- CE Certified
- ISO 8846 MARINE (Ignition Protect)
- ISO 88449 MARINE (Bilge Pump Standard)
Bilge pump submersible Johnson
- Extremely energy efficient
- Water-cooled motor for long service intervals
- Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft
- No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
- Can be combined with either an automatic switch AS888, an electronic float switch or the Ultima Switch for automatic operation
Technical data sheet:
Bilge pump submersible Rule
Bilge pumps RULE. From 360 up to 1100 GPH has cylinder shape and from 1500 GPH up to GPH has bell shape.
- Backflow Prevention – The non-return prevents water left in the discharge from running back, keeping bilges dryer and cleaner.
- Air Vents – Built into the body, they help prevent air locking in challenging plumbing installations.
Available also in square shape at 1000 GPH (article number 17-0223).
Bilge pump TMC
TMC Handy Pump equipped with a handle for portability, works as a multi-functional pump.
For discharging bilge water, deck cleaning, replacing water for fish etc.
Blower flangemount Jabsco
Features:
- High volume air intake or extraction blowers for engine room fuel compartment, galley or heads
- Heavy duty motor
- Very quiet operation
- Efficient radial design
- Made in corrosion-resistant materials
- Outlet flange mounts directly on bulkhead
Blower flexmount Jabsco
Features:
- High volume intake or extraction blower for engine room duty on commercial vessels, charter yachts and other heavy-use installations
- Flexible mounting permits 360º adjustment of outlet direction
- 5,000-hour motor life
- Quiet operation
- Efficient radial design
- Corrosion resistant construction
Bow thruster – Dual propeller
Dual propeller bow thruster. For bow control during docking maneuvers.
The duo – prop design delivers sufficient thrust for heavy or long (up to 30m – 100 ft) boats
To download the manual and the cut-out template for the installation of the bow thruster click here and find your product from the list.
Ceiling light LED TREM
Ceiling light Led, manufactured in white ABS with black switch ON-OFF.
Commercial & Utility Puppy Jabsco
Self-priming pumps with brass head and flexible impeller.
General purpose from pumping water from bilges to deck washing.
Utility pumps manual:
Commercial duty pumps manual:
Contactor – Solenoid Unit for windlass Quick
The contactor and reversing contactor solenoid units T6315 or T6415 are able to operate electric motors for windlasses and capstans. Thanks to their external connections, they are very easy to install.
Degree of casing protection IP66 (Excluding terminals).
Diaphragm washdown pump kit 36503 TMC
Diaphragm pump washing kit:
- Suitable for water transfer, deck shower, deck wash etc
- Self-priming 4.3 gpm (16.3 lpm) diaphragm pressure pump 40 psi
- Built-in thermal overload protection
- Built-in check valve to prevnt backflow
- Can be run dry
- C/W pump, strainer, port fittings (1/2”; 13mm), trigger w/ adjustable jet & lockable lever, and 7m (25 ft.) spring coiled hose
For more information you can visit TMC’s website by clicking here.
Electric toilet 12V/24V 37010 Regular Bowl Jabsco
Electric toilets with porcelain bowl and luxurious wooden enameled white lid and seat.
It can be placed one meter below the water line.
Two types of bowls, regular size (Regular) and small (Compact) for limited spaces.
Available in 12 and 24V.
Electric toilet with large bowl 12/24V TMC
Electric toilets with large bowl and deluxe plastic seat and cover.
Available in 12V and 24V.
Switch box included.
CE Certified
ISO 8846 MARINE (Ignition Protection)
Electromagnetic pump with pulley Ø150
Water transfer electromagnetic pump with flexible impeller. Operates via transition belt attached on the engine.
Emergency battery charger for VHF GALAXY EBC 24V-12Α 7AL
Global Maritime Distress Safety System class D VHF marine Emergency battery charger for VHF.
Festoon bulb 12 LED 44mm
With 360° lighting LED.
In-line blower Rule
Designed for efficient, high output operation, these blowers feature exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, Rule® in-line blowers provide higher air flow, lower amp draw, and quieter operation than standard blowers.
- Efficient high-volume air flow
- Quiet operation
- Low amp draw
- Slip-on inlet and outlet ducting connections
- Sealed motor shaft for moisture protection
- Corrosion resistant nickel-plated motor housing
In-line blower TMC
CE Certified
ISO 8846 MARINE (Ignition Protect)
Macerator pump TMC
Self-priming toilet waste pump. Combines pre-macerator with impeller pump.
Designed for in-line installation on holding tank pump out or to convert manual vacuum toilets to electric operation.
Do not run dry.
Marine fan “Turbo” Hella
2 speed ‘Turbo’ Hella fan available in 12V and 24V, black or white.
Excellent performance that combines high air moving capacity with low power consumption and quiet 2-speed operation.
Side, upright or pendant mounting.
Marine horn compact type inox Voxbell
Twin electro-magnetic marine horn, made of anti-corrosive material. Hornet in chromed ABS with anti-spray grill. Screwed strap connection in AISI 316.
Available in 12 & 24V
Marine horn trumpet type inox
Stainless steel trumpet type marine horn.
Single or double tube available in 12V & 24V.
Oil gear pump Marco
Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft.
Not intended for gasoline, solvents or chemicals.
Portable oil change system TMC
Equipped with reversible gear pump to drain and refill engine oil.
Barrel volume: 17lt (4.5 gallons)
Shower & sink drain pump TMC
Single diaphragm pump suitable for extracting water from the showers and washbasins of the boat.
Self-priming pump, can be run dry.
With 360° rotating head.
Shower drain – diaphragm pump 37202 Jabsco
Self-priming shower drain diaphragm pump 37202-2012 Jabsco.
Shower drain – diaphragm pump 50880 Jabsco
Self-priming diaphragm pump 12 Volt DC.
- Robust, quiet single diaphragm design
- No strainer required
- Single diaphragm design allows extended dry running
- Multi-positional ports for easy mounting
Shower sump system Rule
- A compact, full-capacity shower drain system, activated by a non-mercury Rule-a-Matic Plus float switch
- Automatically turns on after the water starts and shuts off when the water is removed
- Removable strainer allows easy cleaning
- Clear screw-down cover
- Integral non-return valve
Solenoid / anti-syphon valve 37038 Deluxe for electric toilet QF Jabsco
Solenoid valve for use with Quiet Flush fresh water toilets inline, normally closed solenoid valve.
- Supplied with 15mm (1/2”) JG Speed fit connections, 15mm (1/2”) hose barb inlet, 19mm (3/4”) hose barb outlet
- Double check valve to protect against contamination of potable water
- Internal inlet filter
- Mountable in any orientation, above or below toilet.
- Mounting bracket included
Solenoid / anti-syphon valve electric toilet QF Jabsco
- Combined solenoid valve and siphon breaker assembly for connection to any existing pressurized water system capable of delivering 2.9 US gpm (11 lpm) or more.
- Siphon breaker ensures there is no backflow from the toilet into the water system.
Standard switch box TMC
Standard switch box assembly for electric toilet with spring rocker switch.
Underwater LED light flush mount
Underwater light flush mount 1 LED 1W.
Washdown diaphragm pump Jabsco
Pressure-controlled self-priming washdown diaphragm pump supplied with inlet strainer, port fittings & trigger nozzle.
Waste diaphragm pump 50890 Jabsco
Self-priming diaphragm waste pump 12 volt that handles sink, shower and black waste.
- Self-priming up to 3m (9.5ft) vertical lift
- Multi-positional ports for easy mounting
- Rated for up to 30 minutes continuous running
Waste pump TMC
Single diaphragm pump designed to handle toilet waste water.
Self-priming pump and can be run dry.
Adjustable head that can be rotated 360°.
Water pressure pump 16.5Lt / 4.3G TMC
Water pressure pump with 4-chamber diaphragm design that can serve up to 3-4 outlets.
- Smooth constant flow
- Built-in check valve to prevent backflow
- Snap-in port fittings included
- Built-in thermal overload protection
- Self-priming & can be run dry
CE Certified
Water pressure pump Par Max Jabsco
- Smooth flow
- Dry running capability
- Soft noise absorbing mounts
- Snap-fit port fittings
- Built-in bypass -less pulsation
- Reduces need for accumulator tank
- Corrosion resistant materials
- CSA listed
- ISO 8846 MARINE (ignition protection)
- CE
Water pump with brass head TMC
External water pump with brass head and flexible impeller.
General purpose pump from pumping water from bilges to deck washing.
CE Certified
ISO 8846 MARINE (Ignition Protection)
Water pump with plastic head TMC
General purpose presure pump with plastic head and flexible impeller.
It’s high capacity, 25lt (6gal) per minute, makes it quite versitile so it can be used from bilge pump to deck washing.
The new desing allows a 25mm (1″) hose to be attached directly to the head.
Windlass HECTOR HC3
- Horizontal on-deck windlasses
- Base in anodized aluminium in hard oxide
- Jacket in composite material or in aluminium anodized in hard oxide>
- With and without drum
- Rope and chain on a single gypsy
- Integrated sensor and magnet for chain counter
- Supplied with pressure lever
- Integrated solenoids unit
- Emergency manual lift system
- Manual Free-Fall system
- IP66 watertight motor
