120° elbow hose tail (male) Trudesign
TruDesign Long Thread 90° Tails are designed to screw into the range of Ball Valves but can also be used in many applications. Moulded in glass-reinforced nylon composite these Tails are also suitable for use in contact with petrol and diesel fuels.
TruDesign Tails eliminate the corrosion and electrical bonding problems associated with metallic fittings. Tail fittings are designed for twin hose clamps, and to never crush.
ISO 9093-2 και ABYC H27.
90° elbow (male-female) Trudesign
TruDesign Connectors are moulded from a glass reinforced nylon composite. High strength, high-modulus glass fibres impregnated into the nylon provides dramatic strength, stiffness, toughness, and dimensional stability.
TruDesign Connectors eliminate the corrosion and electrical bonding problems associated with metallic fittings.
ISO 9093-2 και ABYC H27.
For more information please click here.
90° elbow hose tail (female) Trudesign
TruDesign composite fittings are moulded from a glass-reinforced nylon composite. High strength, high-modulus glass fibres impregnated into the nylon provide dramatic strength, stiffness, toughness, and dimensional stability.
TruDesign fittings eliminate the corrosion and electrical bonding problems associated with metallic fittings. Tails (Hose barbs) are designed for twin hose clamps and to never crush.
ISO 9093-2 και ABYC H27.
Fore more information click here.
90° elbow hose tail (male) Trudesign
TruDesign Long Thread 90° Tails are designed to screw into the range of Ball Valves but can also be used in many applications. Moulded in glass-reinforced nylon composite these Tails are also suitable for use in contact with petrol and diesel fuels.
TruDesign Tails eliminate the corrosion and electrical bonding problems associated with metallic fittings. Tail fittings are designed for twin hose clamps, and to never crush.
ISO 9093-2 και ABYC H27.
For more information please click here.
Ball valve plastic Trudesign
TruDesign Ball Valves are designed and made in New Zealand for use in marine applications above and below the water line.
- Manufactured from a glass-reinforced nylon composite – High strength and light weight
- Immune to corrosion and electrolysis – Long life with no concerns over decreased performance due to corrosion
- Chemical resistant – Impervious to diesel, petrol and antifouling paints
- UV resistant – Will not degrade or discolor with ultraviolet light from the sun
- Large operating temperature range (-40° to +110°C)
- High quality surface finish – Will not discolor with green film as similar bronze fittings do
ISO 9093-2 and ABYC H27 Certified
Manual:
Ball valve spanners Trudesign
- Manufactured from a glass reinforced nylon composite – High strength and light weight.
- Immune to corrosion and electrolysis – Long life with no concerns over decreased performance due to corrosion.
- Chemical resistant – Impervious to diesel, petrol and antifouling paints.
- UV resistant – These fittings will not break down with ultraviolet light or discolour from the sun.
- High quality surface finish – Will not discolour with green film as similar bronze fittings do.
- Large operating temperature range – Suitable for all marine environments, from -20°C to +110°C.
Hose connector (nipples) Trudesign
TruDesign Tails are moulded from a glass-reinforced nylon composite. High strength, high-modulus glass fibres within the nylon composite provides dramatic strength, stiffness, toughness, and dimensional stability.
TruDesign Tails eliminate the corrosion and electrical bonding problems associated with metallic fittings. Tail fittings are designed for twin hose clamps and to never crush.
ISO 9093-2 και ABYC H27.
For more information please click here.
Hose tails straight Trudesign
TruDesign Tails are moulded from a glass-reinforced nylon composite. High strength, high-modulus glass fibres within the nylon composite provides dramatic strength, stiffness, toughness, and dimensional stability.
TruDesign Tails eliminate the corrosion and electrical bonding problems associated with metallic fittings. Tail fittings are designed for twin hose clamps and to never crush.
Large operating temperature range, suitable for all marine environments, from -40°C to +110°C.
ISO 9093-2 & ABYC H27
For more information please click here.
Load bearing Trudesign
TruDesign load bearing collars are designed for use with Trudesign skin fittings and ball valves.
With the collar in place, the skin fitting-ball valve-hose tail assembly will withstand a 500 lb (227 kg) static force applied to the Hose Tail end of the assembly, for a minimum of 30 seconds – complying with North American ABYC H-27 standards.
Note: Trudesign 2″ skin fittings meet the requirements of H-27 500Lb standard (i.e. without a Large Collar installed). Adding a large collar to assemblies of this size increases the overall strength and protects the vulnerable exposed section of thread on the Skin Fitting.
Non return valve Trudesign
TruDesign Non-Return Valves (Check Valves) are made from UV stabilised glass reinforced nylon, these composite material fittings are designed for the harsh marine and agricultural environments.
They can be used in line to prevent water backflow or siphoning and have a very low cracking pressure. High strength and lightweight. Can be used in direct sunlight. Minimal installation room needed and no other fittings required.
Plastic black through-hull
Suitable for underwater use, TruDesign range of Skin Fittings are certified by the International Marine Certification Institute (IMCI) and Bureau VERITAS to ISO 9093-2.
They also comply with ABYC H-27 when used in conjunction with the TruDesign ABYC collar.
Designed and made in New Zealand, the Skin Fitting body and nut are moulded from a glass-reinforced nylon composite. High strength, high-modulus glass fibres provide dramatic strength, stiffness, toughness and dimensional stability. These properties allow a significant weight reduction over metallic fittings.
- Manufactured from a glass-reinforced nylon composite – High strength and light weight
- Compatible with all hull types – Can be used on aluminium, steel, wood or GRP hulls
- Immune to corrosion and electrolysis – Long life with no concerns over decreased performance due to corrosion
- Chemical resistant – Impervious to diesel, petrol and antifouling paints
- UV resistant – Will not degrade or discolour with ultraviolet light from the sun
- High quality surface finish – Will not discolour with green film as similar bronze fittings do
- Paintable – Can be painted with all types of antifouling
ISO 9093-2 & ABYC H27 Certified
Reducers Trudesign
Reducers moulded from a glass reinforced nylon composite for linking 2 hoses of different sizes
- High strength and light weight
- Long tail feature – The use of 2 hose clamps is recommended for secure hose fitting
- Immune to corrosion and electrolysis – Long life with no concerns
- Chemical resistant – Impervious to diesel, petrol and antifouling paints
- UV resistant, these fittings will not break down with ultraviolet light or discolour from the sun
- High quality surface finish, will not discolour with green film as similar bronze fittings do
- Large operating temperature range and suitable for all marine environments, from -40°C to +110°C
Skin fitting install tool Trudesign
TruDesign skin fitting install tools are a world-first which allows the installation of a skin fitting to be carried out by a single person. No longer is a second person needed to hold the skin fitting in place on the outside of the hull and stop it from turning whilst the first person on the inside of the hull tightens the skin fitting nut.
- Manufactured from a glass-reinforced nylon composite – High strength, durable and light weight
- Compatible with both Domed and Recessed head TruDesign Skin Fittings from ¾” to 2″ in size
- Positive ‘click’ to notify once properly engaged with the Skin Fitting
- Handles for clean and easy handling of a Skin Fitting with sealant or epoxy adhesive applied to it
Download info sheet:
Straight hose connector Trudesign
- Long tail feature – The use of 2 hose clamps is recommended for secure hose fitting
- Manufactured from a glass reinforced nylon composite – High strength and light weight
- Immune to corrosion and electrolysis – Long life with no concerns over decreased performance due to corrosion
- Chemical resistant – Impervious to diesel, petrol and antifouling paints
- UV resistant – These fittings will not break down with ultraviolet light or discolour from the sun
- Large operating temperature range – Suitable for all marine environments, from -40°C to +110°C
- High quality surface finish – Will not discolour with green film as similar bronze fittings do
T piece connector nylon Trudesign
The 1½” threaded T-Piece features 2x female threads and 1x male thread enabling them to be joined together to create manifolds – useful for multiple hose connections to a single ball valve & thru-hull fitting.
The center female thread is shorter and designed for use with Aquavalve tails (Straight, 90°, and 120°) giving the option of tail sizes from 19mm up to 38mm. The plug, or threaded connector can also be used in the center connection.
- Manufactured from a glass reinforced nylon composite – High strength and light weight
- Immune to corrosion and electrolysis – Long life with no concerns over decreased performance due to corrosion
- Chemical resistant – Impervious to diesel, petrol and antifouling paints
- UV resistant – Will not break down with ultraviolet light or discolour from the sun
- High quality surface finish – Will not discolour with green film as similar bronze fittings do
- Large operating temperature range – Suitable for all marine environments, from -40°C to +110°C
Through-hull fitting Trudesign
Suitable for underwater use, TruDesign range of Skin Fittings are certified by the International Marine Certification Institute (IMCI) and Bureau VERITAS to ISO 9093-2.
They also comply with ABYC H-27 when used in conjunction with the TruDesign ABYC collar.
Designed and made in New Zealand, the Skin Fitting body and nut are moulded from a glass-reinforced nylon composite. High strength, high-modulus glass fibres provide dramatic strength, stiffness, toughness and dimensional stability. These properties allow a significant weight reduction over metallic fittings.
- Manufactured from a glass-reinforced nylon composite – High strength and light weight
- Compatible with all hull types – Can be used on aluminium, steel, wood or GRP hulls
- Immune to corrosion and electrolysis – Long life with no concerns over decreased performance due to corrosion
- Chemical resistant – Impervious to diesel, petrol and antifouling paints
- UV resistant – Will not degrade or discolour with ultraviolet light from the sun
- High quality surface finish – Will not discolour with green film as similar bronze fittings do
- Paintable – Can be painted with all types of antifouling
ISO 9093-2 & ABYC H27 Certified
Y-Valve plastic 1-1/2″ Trudesign
Manufactured from a glass reinforced nylon composite. High strength and light weight, will not corrode in salt laden air.
Easy installation, with a range of straight, 90° and 120° tails, and two seal options, plumbing in confined spaces is made easy.
Pressure tested. All valves are pressure tested to ensure quality and safety in respect to sealing and operation.
The Aquavalve® is the only valve on the market today with smooth movement and an excellent seal with good wear resistance.
Large operating temperature range, suitable for all marine environments, from -40°C to +110°C.
