1 component enamel Top Side / Bootoping Deck
Recommended thinner: LS701
1 component finish Unigloss
One-pack high quality enamel
- Good flexibility and adhesion on a wide range of primers and finishes
- Not applicable directly on galvanized primers
- Available in various colours
- Not suitable for continuous immersion
Theoretical coverage (m²/ LT): 13,5
Recommended thinner: 6470
1 component Yacht enamel
Recommended thinner: LS701
120° elbow hose tail (male) Trudesign
TruDesign Long Thread 90° Tails are designed to screw into the range of Ball Valves but can also be used in many applications. Moulded in glass-reinforced nylon composite these Tails are also suitable for use in contact with petrol and diesel fuels.
TruDesign Tails eliminate the corrosion and electrical bonding problems associated with metallic fittings. Tail fittings are designed for twin hose clamps, and to never crush.
ISO 9093-2 και ABYC H27.
2 component P/U enamel
Recommended thinner: LS745
2-pack polyurethane finish Gel Gloss Pro
A high quality enamel with excellent resistance to marine and industrial environment, to ageing and to ultraviolet rays.
Does not yellow, is very flexible and retains its gloss. Excellent levelling gives improved aesthetic appearance to topsides, decks, superstructures etc. Gel Gloss Pro can be applied directly to gel coats or to epoxy or polyurethane primers (Epoply,Polygoal).
A wide range of colours, which can be blended, is available.
Not suitable for continuous water immersion.
Theoretical coverage (m²/ LT): 13,5
Recommended thinner: 6700 / 6780
For more information please visit Veneziani’s website.
Technical data sheet (TDS):
645
Pro 018
Pro 035
Pro 112
Pro 378
Pro 411
Technical data sheet (TDS):
Pro 519
Pro 664
Pro 708
Pro 715
Pro 762
Pro Catalyst
291i SIKA Multifunctional adhesive sealant for marine applications
Sikaflex®-291i is a non-sag 1-component polyurethane sealant specifically developed for the marine market, which cures on exposure to atmospheric moisture. Sikaflex®-291i meets in addition the low spread of flame requirements set out by the International Maritime Organisation (IMO).
- Wheelmark approved
- 1-component formulation
- Highly elastic
- Low odour
- Non-corrosive
- Can be painted
- Bonds well to a wide variety of marine substrates
- Solvent free
- Very low VOC
- Low isocyanate content
3-strand high tenacity mooring rope – Black
High tenacity 3-strand polyester, non floating mooring rope.
With distinctive white stripe that differentiates it from the medium tenacity
Ideal for mooring due to easy splicing
Approximate packing measures +/- 5%.
3-strand medium tenacity mooring rope – Black
Medium tenacity, 3-strand, polyester, non floating mooring rope.
Ideal for mooring due to easy splicing
Approximate packing measures +/- 5%.
90° elbow (male-female) Trudesign
TruDesign Connectors are moulded from a glass reinforced nylon composite. High strength, high-modulus glass fibres impregnated into the nylon provides dramatic strength, stiffness, toughness, and dimensional stability.
TruDesign Connectors eliminate the corrosion and electrical bonding problems associated with metallic fittings.
ISO 9093-2 και ABYC H27.
For more information please click here.
90° elbow hose tail (female) Trudesign
TruDesign composite fittings are moulded from a glass-reinforced nylon composite. High strength, high-modulus glass fibres impregnated into the nylon provide dramatic strength, stiffness, toughness, and dimensional stability.
TruDesign fittings eliminate the corrosion and electrical bonding problems associated with metallic fittings. Tails (Hose barbs) are designed for twin hose clamps and to never crush.
ISO 9093-2 και ABYC H27.
Fore more information click here.
90° elbow hose tail (male) Trudesign
TruDesign Long Thread 90° Tails are designed to screw into the range of Ball Valves but can also be used in many applications. Moulded in glass-reinforced nylon composite these Tails are also suitable for use in contact with petrol and diesel fuels.
TruDesign Tails eliminate the corrosion and electrical bonding problems associated with metallic fittings. Tail fittings are designed for twin hose clamps, and to never crush.
ISO 9093-2 και ABYC H27.
For more information please click here.
Adhesive sealant 291i SIKA
Sikaflex®-291i is a non-sag 1-component polyurethane sealant specifically developed for
the marine market, which cures on exposure
to atmospheric moisture.
- 1-component formulation
- Highly elastic
- Low odour
- Non-corrosive
- Can be painted
- Bonds well to a wide variety of marine substrates
- Solvent free
Technical data sheet (TDS)
Aluminum winch handle black 12″
Winch handle 12″ μanufactured in anodized aluminium, with nylon handgrip and safety locking system.
Universal model.
Aluminum winch handle10″ Harken
These robust low-friction ball bearing handles match a wide range of cranking needs for both racers and cruisers.
Handle feature a ball bearing grip that efficiently transmits power into the winch and a lock-in switch and provides powerful two-handed grinding
Ammeter
High precision engine instruments.
Each instrument is featuring a thread and a locknut that make them easy to install.
Body made of ABS, with backlight.
Water resistance: front IP67 / inner IP65
Antifouling Regatta A/F Speed
Regatta A/F Speed is a high quality hard antifouling paint that meets all applicable environmental standards. It is an antifouling paint that is addressed to yachts whose speed exceeds 30 miles per hour. It is the ideal choice for speedboats. It can be applied on all types of boats, plastic, wood, metal and even on aluminum surfaces, always with the prior application of the appropriate primer per case.
Thinner: LS703
Antifouling Regatta Οptima
Regatta Optima is a high quality self-cleaning reef paint. It is a product that incorporates the latest technologies in the manufacture of reef paints and meets all applicable environmental standards. It is a color aimed at yachts whose maximum speed does not exceed 30 miles per hour.
It is an ideal choice for sailing and cruiser boats. It can be applied on all types of boats, plastic, wood, metal and even on aluminum surfaces, always with the prior application of the appropriate primer per case.
Recommended thinner: LS703
Antifouling spray paint Osculati
Antifouling spray paint Osculati for stern drives and propellers.
Backpacks for SUP
Comfortable backpacks with a zip to transport and store SUP boards, made of reinforced polyester.
- Capacity: 90lt & 100lt
- Large main compartment for SUP board
- Padded straps
- Straps for hand pump transportation
Battery box with external clamps
Battery box with lid made from ABS, 2 x 12 V outlet, external wing nut socket for connecting an electric motor or battery charger. Also, the battery box has a convenient battery tester; with the push of a button are you aware of the battery status.
Equipped with fastening fittings.
Bicolor life jacket 50N Olympia
Life jacket designed for use in water activities that require a sitting position (canoeing, kayaking, sailing).
Short with side zips, velcro fastening straps and front pocket.
Certified according to ISO 12402-5.
Binoculars Mate
These binoculars are equipped with an auto focus feature and an excellent balance of magnification and aperture. Designed for marine use, its classic 7×50 model provides an optimal balance of magnification and aperture.
Binoculars with increased magnification are harder to hold steady which may cause the image to appear blurry, whereas a smaller lens would decrease aperture, causing the image to appear darker.
This model features BK 7 prisms and extended eyecups that are useful for users with glasses.
Linear field refers to the width of the area seen when observed at the distance of 1,000 m. With a field of view of 7,1 degrees, the linear field is 119 m at 1,000 m.
Binoculars Vetus
Specifications:
- Solid but lightweight aluminum housing
- BK7; high quality optics for the sharpest images
- Roll down eyecups for use with (sun) glasses
- Central focusing wheel
- Non-slip grip
- Magnificaio:7x
- Lens diameter: 50mm
- Blue coating: Good light transmission
Included:
- Carrying case
- Neck strap
Black chemical resistant gloves
Gloves with non-slip rubber coating resistant to chemicals.
Also suitable for use in fish farming.
The gloves are one size.
Black spool keel roller for boat trailers
Spool keel roller made from molded rubber.
Boat cowl vent
Air cowl vent overflow box for boats.
Bracket-mount compass Offshore 75 Plastimo
The broad and sturdy bracket base absorbs the vibrations. Mounting can be done on any surface, whatever the angle, provided that the compass & card unit remains horizontal at all times. Bracket-mount compass can also be removed when fitted with clip-plate.
Approval: ISO 613 compliant
For more information please click here.
Bracket-mount compass Offshore 95 Plastimo
Broad and sturdy bracket base absorbs vibrations. Mounting can be done whatever the angle, provided that the compass and card unit remain horizontal at all times. Bracket-mount compass can also be removed when fitted with clip-plate.
• All parts fully UV-ray treated.
• Scratch resistant dome.
Approval: ISO 613 compliant
For more information please click here.
Braided cord – solid color – Black
Very high strength polyester cord.
Suitable for fishing as well as for various on board tasks such as flag pole rope or outboard engine starter cord
Braided doormat
Braided doormats available in black colour.
Braided rope – solid color
Polyester, 24-strand, braided rope.
Non floating, general purpose, suitable for all light duty tasks on and off board
Approximate packing measuring + / – 5%
Cable ties (tie wrap)
Cable ties (tie wrap) for securing and arranging cables as well as for many other applications, in a package of 100 pieces.
Canvas soft case for tools 18pcs
Sold individually, can be combined with article Set of hand tools 18pcs (38-0406).
Case for WM200 Windmate
Case made of nylon fabric with velcro for WindMate 200 wind meter, it protects it when not in use as well as you can safely carry-along wherever you go.
Chafe cover for ropes Fendress
Rope protector socks to minimize chafing and wear of fender and mooring lines.
Hand made in France from high quality UV stabilized acrylic fabric.
Full length heavy duty Velcro fastening enables the rope sock to remain in place in difficult conditions.
Chafe cover for ropes with velcro
Rope protector socks to minimize chafing and wear of fender and mooring lines.
Full length heavy duty Velcro fastening enables the rope sock to remain in place in difficult conditions.
Clips for oars plastic
Plastic tube clips for securing and storing paddles and hooks.
They can be placed everywhere and are available in 4 different sizes.
Cloth repair duct tape 6200 ΗΡΧ
- Very strong, universal, high quality cloth tape with high adhesive strength
- Suitable for securing and repairing pipes, tubes, garden hoses, etc.
- Hand tearable
- Waterproof and weather resistant
Construction adhesive MSR Bostik
Adhesive specially designed for marine applications such as all kinds of welding and sealing on boats and ships. It has excellent adhesion to various materials. Ideal for welding without the use of primer of various materials such as: Fiberglass, wood, metal, epoxy, glass etc. With long-term resistance to adverse conditions, salt water, UV radiation, temperatures from -40°C to +100°C.
It can be painted with almost all paints and varnishes, about 30 minutes after application, without affecting the coagulation of the material or the drying of the paint.
Crew Jacket with fleece Marinepool
*Please contact us for available sizes and further information
Cupron Plus – Antifouling
Ablative antifouling that is the result of a formulistic evolution guaranteeing an adequate seasonal protection and a universal application on every type of vessel and support.
In order to guarantee a good performance for the season, it is necessary to apply 2 coats of product.
This antifouling is compatible with most undercoats such as Ticoprene and Unikote Pro.
All colours are suitable for aluminium hulls.
Theoretical coverage (m²/ LT): 9
Thinner: 6610
For further information please visit Veneziani’s website.
Technical data sheet (TDS)
Day signal anchorage ball
Internationally recognised daytime signal, used by boats when at anchor.
Made of highly resistant plastic. Folds easily for storage.
Day signal black cone
Optical signal used during day time. The signal cones are attached to the mast to indicate a vessel’s status. This shape in particular is to signal the vessel is under both sail and engine power.
Diving mask CORVO
Adult diving mask made of silicone and processed glass.
Diving mask LEON
Adult diving mask made of TPP and processed glass.
Double braided rope – Solid color Black
Double braided, 32-strand, polyester rope.
Higher strength than the single braided.
Non floating, general purpose, is suitable for all light & medium duty tasks on and off board
Approximate packing measuring + / – 5%
Double brush black
Double brush with soft white hair and plastic handle.
Suitable for final colors and varnishes.
Double suction cups with cleat
Non-marking white pads, ideal to use on the hull or to move around with a platform.
- Lifting capacity: 80kgs
- aisi 316 stainless steel parts
- Suction pad diameter: 115mm
Drain plug light small Ø38 LED
Waterproof LED drain plug light.
Suitable for use under water.
Flush mount.
Available in 3 shades white, yellow or blue.
Dual Lock reclosable fastener 3M
The interlocking mushroom-shaped heads provide strong, reliable and durable fastening that can be opened and closed multiple times.
An alternative to screws and bolts that bonds well to a variety of substrates including metals and plastics such as acrylics, polycarbonate and ABS.
Suited for both indoor and outdoor use.
Duo Grip velcro ΗΡΧ
- Resecurable click-fastening action: the best attachment is obtained by pressing the hook structures fully together
- Suitable for both light and heavy loads, for example: car mats, car tools, audio equipment, etc.
- Can withstand loads up to five times greater than with traditional “hook and loop” connections
Adhesive: synthetic rubber
Carrier: polyamide
Maximum temperature: 93°C
Thickness: 5,40 mm
Echo – transducer antifouling
Echo transducer antifouling paint is used to protect the transducer of a sonar fish finder or depth sounder (echo sounder).
Instructions for the fitting of echo sounders indicate that normal antifoul should not be used on the transducer because solvents damage the transducer, the electrical conductivity of the paint reduces the signal and traditional thick antifoul reduces signal strength.
Echo is water-based, contains no copper, produces a thin film and therefore minimises the impact on the transducer.
Eurosprint Next – Antifouling
Hard-matrix antifouling paint with high copper content to ensure excellent protection. Eurosprint is an antifouling suitable for antifouling protection in sea water, brackish water and fresh water.
A hard antifouling, with good abrasion resistance, Eurosprint is recommended for sail boats and fast motor boats (also faster than 35 knots). Can be used for boats made of wood, steel or GRP.
Only the white Eurosprint is suitable for aluminium boats.
Theoretical coverage (m²/ LT): 10
Recommended thinner: 6470
For more information please visit Veneziani’s website.
Safety data sheet (SDS)
Black
White
Deep Blue
Technical data sheet (TDS):
Fabric tool bag WorkPro
WorkPro fabric tool case available in 2 sizes.
With a total of 13 pockets both on inside and outside, made of 100% polyester.
It has a reinforced bottom made of high resistance plastic, a large opening for easy access to the stored tools and a shoulder strap for easy carrying.
Fan small black
Small fan with fixed steering head and 2 speeds.
Fender A series
Inflatable fenders made from injection-moulded PVC eye and rotomoulded PVC body.
- Solid injection-moulded eye.
- Uniform wall thickness.
- Highly resistant to abrasion and sunlight.
- Smooth surface and glossy finish.
- Body manufactured in flexible material.
- Created for extreme resistance and to withstand severe conditions.
- High-quality plastic valve to guarantee a perfect seal.
Fender covers black A series
Fendress fender covers are 100% acrylic and UV resistant, can last up to 3500 hours of high UV exposure.
Thick and soft will efficiently protect the top side of your boat as well as embellish the sight of your boat.
Machine washable, avoid the use of detergent.
Fender covers black F, G and NDE series
Fendress fender covers are 100% acrylic and UV resistant, can last up to 3500 hours of high UV exposure.
Thick and soft will efficiently protect the top side of your boat as well as embellish the sight of your boat.
Machine washable, avoid the use of detergent.
Fender F series
Inflatable fenders made from PVC.
- Twin-eye design for vertical or horizontal use.
- Highly resistant to abrasion and sunlight.
- Smooth surface and glossy finish.
- Body manufactured in flexible material.
- High-quality plastic valve to guarantee a perfect seal.
