Ultraflex X34 is a 90º mounting Steering Bezel Kit used when installing T71 & T73 steering helm units.
Compatible with rack and rotary steering systems.
The Ultraflex T-67 rotary helm features a standard 3/4′ taper to suit Ultraflex, Morse & Teleflex steering wheels.
It is generally accepted that the T67 Helm and M-58 Steering cable are adequate for outboard engines up to 55hp however in cases of more frequent and harsher use the T-71/T-73 Ultraflex Helm with M-66 Steering cable would be advisable due to the more robust construction of the helm units.
Features:
*For boats exceeding 50 mph speed is necessary for safety reasons, the use of hydraulic steering gear*
Installation & maintenance manual:
he Ultraflex T71FC rotary helm features a standard 3/4′ taper to suit Ultraflex, Morse & Telefex steering wheels.
With the gearing system within the helm unit this system is particularly suited to higher horsepower outboard and inboard engines and in situations where heavy wear and tear is expected.
Features:
Combined with steering cables M66 and bezel kit X34.
*For boats exceeding 50 mph speed is necessary for safety reasons, the use of hydraulic steering gear*
The Ultraflex T85 rotary steering helm features a standard 3/4′ taper to suit Ultraflex, Morse & Telefex steering wheels. Ultraflex T-85 steering helm is suitable for larger outboard and inboard engines.
In cases of more frequent and harsher use the T-71/T-73 Ultraflex Helm with M-66 Steering cable would be advisable due to the more robust construction of the helm units.
Helm Kit Includes:
*For boats exceeding 50 mph speed is necessary for safety reasons, the use of hydraulic steering gear*
Installation & maintenance manual:
Patented M90 Mach fast connecting cable.
Attention: M90 Mach cable is also suitable for use with steering wheels using M66 cables but these latter are not fit for T91/T93ZT steering systems.
Engine side stainless steel cable with watertight seal.
Central shaft for easy installation.
4.2 steering wheel turns, 228-mm stroke, 408-mm Ø steering wheel, 200-mm minimum steering cable bend radius
Recommended for boats faster than 50 MPH.
Not to be used on boats equipped with engines that exceed the maximum HP rating of the boat. T93ZT non- reversible version.
It isn’t necessary to remove the steering wheel since the propeller rotation will not make the boat veer.
*For boats exceeding 50 mph speed is necessary for safety reasons, the use of hydraulic steering gear*
Heavy duty 18 laywire conduit for long life & high efficiency for smooth operation and reduced bend radius. Ideal for long complex cable runs. High resistance blue outer jacket protects against abrasion, UV and chemicals. Terminal thread M5
Dual action control to operate both throttle and shift.
Can be installed right or left.
Suitable for any type of boats outboard or inboard.
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling.
For use with C8, C2 engine control cables.
Made of chrome plated marine aluminum.
Selector unit for use with single lever controls in dual station applications.
It enables independent control over throttle and shift from either the main station or the flying bridge station.
NOTE: Before changing station, throttle must be on idling position and shift in neutral, only for inboard and sterndrive engines.
For all Suzuki, Mariner, Yamaha, Tohatsu, Selva and Honda outboard and inboard engines.
Made from stainless steel with thread Μ5 and stroke length 87mm.
External diameter 6,8mm.
Universal engine control cable made of stainless steel, thread M5.
External diameter 8.5mm.
Ultraflex B14 stop cable suitable for engine or fuel shut-off, choke, release etc with T handle.
Supplied with L13 and L14.
Stroke 70mm.
External diameter 7mm.
Ideal for inboard engines.
3-Spoke Steering Wheel made of thermoplastic anti-shock material, hard touch grip.
Meet with the EN28848, EN29775 & ABYC P22 standards
Steering cable Μ66 suitable for Τ71FC and Τ85.
Minimum bend radius 200mm.
Single lever control to operate both throttle and shift.
Single lever control to operate both throttle and shift.
Can be installed right or left.
Suitable for any type of boats outboard or inboard.
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling.
Made of chrome plated marine aluminum.
For use with C8, C2 engine control cables.
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
For use with all Ultraflex control cables except C4, C36 and MACH36.
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
• Can be installed horizontally or vertically, on the starboard or port side of the boat
• Provided with a brake tension release system adjustable from outside
• Pull-out handle disengages shift for warm-up
• Includes X12 neutral safety switch which prevents in-gear starting
For use with all Ultraflex control cables except C4, C36 and MACH36
Suitable for any type of engine.
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling.
Can be installed horizontally or vertically, on the starboard or port side of the boat.
Any cable may be used (except C22/C36/MACH 36)
90º rudder support which includes dual position mounting bracket which allows for flexible installation, steering cable support tube and nylon ball joint.
Steering cable Μ90 made from stainless steel suitable for use with T91, T93ZT, T101, T103ZT, T71FC, T72FC, T73NRFC, T74NRFC, T81FC, T82FC, T83NRFC, T85 Ultraflex steering helms.
Minimum radius bend 150 mm.
Steering cable Μ58 suitable for steering Τ67.
Minimum bend radius 200mm.
Showing all 22 results