Adherglass – Primer
Adherglass is a primer which is based on synthetic polymers. It is a one-pack primer providing good adhesion and suitable for use on gel coats, GRP and epoxies such as Epoway and Aquastop.
Adherglass is quick-drying and is used principally as a primer for antifouling on GRP or on new or stripped gel coats.
The surface does not require sanding to guarantee good adhesion, but must be thoroughly degreased.
Theoretical coverage (m²/ LT): 13.3
Recommended thinner: (for cleaning only) 6780
For further information please visit Veneziani’s website.
Technical data sheet:
Safety data sheet:
Adherpox – Primer
Modified two-pack epoxy primer suitable for boat-hulls but also recommended for topsides and superstructures. Adherpox has been formulated for all types of boat building materials (aluminium included). If several coats are applied, this primer provides good corrosion protection. Thanks to its high solids by volume Adherpox complies with VOC-regulations.
A special feature of Adherpox is its extended recoating interval: 3 months when recoated with antifoulings and 6 months when recoated with an additional coat of Adherpox, without sanding.
Theoretical coverage (m²/ LT): 11
Thinner: 6610
For further information please visit Veneziani’s website.
Technical data sheet(TDS)
Gelshield 200 – Antiosmosis treatment
A quick drying, high performance, two-component epoxy for application to sound gelcoats to help protect against osmosis.
Gelshield is provided in two shades (green and grey) to ensure complete coverage by alternating coats.
Suitable for use in temperatures down to 5°C. Area Above and below the waterline.
Theoretical coverage (m²/ LT): 9,1
Thinner: No. 7
Primocon – Primer
Primocon is a fast drying, one-part primer for use below the water line before antifouling is applied.
Formulated for timber, steel, aluminium, cast iron keels and lead keels.
Theoretical coverage (m²/ LT): 7.4
Thinner: No. 3
Propeller primer
A one-pack primer for Propeller antifouling, based on synthetic resins, which adheres well to metal and alloys in general.
Especially formulated to provide the adhesion of the antifouling Propeller, it can be used for all underwater metal parts which need to be protected against fouling such as propellers, shafts, flaps, etc. An improved primer which is quick drying, has good anti corrosion properties and is easy to use.
Theoretical coverage (m²/ LT): 16
For further information please visit Veneziani’s website.
Technical Data Sheet(TDS)
Subcoat Xt two-pack filler for underwater application
A pure epoxy compound, 100% solids by volume, which can remove water from the surface to be treated,providing excellent adhesion even on wet surfaces. Particularly useful for temporary repairs of leaks and cracks in the boat when it is in the water or moving.
Subcoat S adheres easily to GRP, gel coats, old epoxies, epoxy tar as well as steel and concrete. It is suitable for temporary repairs on sea chests, boot topping and submerged parts of cement quays. It is resistant to temperatures up to 100°C.
For more information please visit Veneziani’s website.
Technical data sheet (TDS)
Ticoprene – Primer
Ticoprene is a one-pack chlorinated rubber primer pigmented with aluminium flakes, an all-purpose primer for the marine environment, suitable for maintenance painting of wood and steel boat hulls and structures. It can be applied also to zinc primers as well as to one-pack and two-pack primers. Well suited as a sealer for old antifoulings. Ticoprene provides good protection to parts immersed in salt and freshwater.
Theoretical coverage (m²/ LT): 8,5
Thinner: 6470
For further information please visit Veneziani’s website.
Technical data sheet: