Paints

Showing 1–24 of 64 results

Adherglass – Primer

Adherglass is a primer which is based on synthetic polymers. It is a one-pack primer providing good adhesion and suitable for use on gel coats, GRP and epoxies such as Epoway and Aquastop.

Adherglass is quick-drying and is used principally as a primer for antifouling on GRP or on new or stripped gel coats.

The surface does not require sanding to guarantee good adhesion, but must be thoroughly degreased.

Theoretical coverage (m²/ LT): 13.3

For further information please visit Veneziani’s website.

Technical data sheet:

Safety data sheet:

Adherpox – Primer

Modified two-pack epoxy primer suitable for boat-hulls but also recommended for topsides and superstructures. Adherpox has been formulated for all types of boat building materials (aluminium included). If several coats are applied, this primer provides good corrosion protection. Thanks to its high solids by volume Adherpox complies with VOC-regulations.

A special feature of Adherpox is its extended recoating interval: 3 months when recoated with antifoulings and 6 months when recoated with an additional coat of Adherpox, without sanding.

Theoretical coverage (m²/ LT): 11

Thinner: 6610

For further information please visit Veneziani’s website.

 

Technical data sheet(TDS)

 

 

Antifouling Classic Five Stars

 

A/F Classic is a hard, non-self-cleaning reef paint. Thanks to the advanced technologies it incorporates, it is an economical but reliable solution for boats that only stay in the water for a few months a year.

Recommended thinner: LS703

Antiskid powder additive for Resina 2000

A specially granulated powder of an odourless plastic material for use as an antiskid additive to boat flooring and/or deck paints. It possesses excellent mechanical characteristics and resistance to the marine environment.

For further information please visit Veneziani’s website.

 

Technical data sheet (TDS):

 

Aquastop – Antiosmosis treatment


Aquastop is designed specifically for the treatment of GRP boats affected by OSMOSIS and is particularly recommended as a preventative, protective treatment. This product is water resistant (both sea and fresh water), making the boat highly impermeable, and forms an effective barrier layer for submerged metal parts (keels, flaps, rudders, etc.).

Theoretical coverage (m²/ LT): 5

For further information please visit Veneziani’s website.

 

Technical data sheet (TDS)

 

Aquastrip – Paint remover


Ecological stripping gel with low environmental impact solvents. Specifically formulated for removing old antifoulings from wood, GRP, steel and other metals. It has good stripping power also on one-pack primers, undercoats and finishes. Does not damage gel coats or GRP and can be handled without harmor risk.

Aquastrip requires longer softening time if compared to solvent based strippers, but is effective on large surfaces such as hulls applying one coat only without any danger for the boat, the operators and the environment. Aquastrip free from toxic or harmful components: does not contain N-methyl-2-pyrrolidone (NMP). Has a neutral pH and can be used indoors without requiring special ventilation.

For further information please visit Veneziani’s website.

 

Technical data sheet (TDS)

 

Ceramite Yachting


A high-build, odourless epoxy paint which is solvent-free for the internal and external treatment of any surfaces which need to be sealed, such as water tanks, galleys and cool boxes. Used in antiosmosis systems as a sealant for bilge, fore and aft peaks and hidden internal surfaces.

This product is also suitable for use on wood and steel and has a high chemical resistance to fresh and salt water, diesel, oil, and acidic and basic solutions. Ceramite Yachting is easily cleaned with an ordinary liquid detergent as it has a hard, glossy surface.


Theoretical coverage (m²/ LT): 6,7

 

For further information please visit Veneziani’s website.

Technical data sheet (TDS)

 

Cupron Plus – Antifouling


Ablative antifouling that is the result of a formulistic evolution guaranteeing an adequate seasonal protection and a universal application on every type of vessel and support.

In order to guarantee a good performance for the season, it is necessary to apply 2 coats of product.

This antifouling is compatible with most undercoats such as Ticoprene and Unikote Pro.

All colours are suitable for aluminium hulls.

 

Theoretical coverage (m²/ LT): 9

Thinner: 6610

For further information please visit Veneziani’s website.

 

Technical data sheet (TDS)

 

Danboline

Danboline protects bilges, lockers and bulkheads against moisture penetration, and wear and tear.

Danboline will resist oil and fuel spillage and cleans easily.

 

Theoretical coverage (m²/ LT): 11

Thinner: No. 1

 

For further information visit International’s website.

Echo transducer antifouling

 

Echo transducer antifouling paint is used to protect the transducer of a sonar fish finder or depth sounder (echo sounder).

Instructions for the fitting of echo sounders indicate that normal antifoul should not be used on the transducer because solvents damage the transducer, the electrical conductivity of the paint reduces the signal and traditional thick antifoul reduces signal strength.

Echo is water-based, contains no copper, produces a thin film and therefore minimises the impact on the transducer.

Ecoplast – Epoxy coating

Epoxy coating for internal use where there is contact with foodstuffs. Recommended for the treatment of iceboxes, cool boxes, galleys and drinking water containers. This product is certified for use with foodstuffs, in particular drinking water, fresh and refrigerated fish, molluscs, crustaceans, etc. Ecoplast is an odourless, solvent-free product which is easy to apply even in confined areas. This product is a sealant and a barrier paint with a high resistance to chemical agents. Ecoplast conforms to D.M.21/3/1973 (concerning hygiene in packaging, containers and utensils intended to come into contact with foodstuffs) and DM 06/04/2004 n.174 (concerning materials and equipment used in facilities for the containment, treatment, conveyance and distribution of drinking water for human use).

Theoretical coverage (m²/ LT): 6,5

For further information please visit Veneziani’s website.

 

Technical data sheet (TDS)

 

Epoway – Epoxy primer

Two-pack epoxy undercoat with barrier effect, which can be applied to any kind of substrate (wood, steel, aluminium and GRP). This coating may be used both as barrier coat and as undercoat for enamels.

Can be recoated, after sanding, with two-pack enamels.

Theoretical coverage (m²/ LT): 5

Recommended thinner: 6610

For further information please visit Veneziani’s website.

Technical data sheet (TDS)

Fibrodur – Sealing primer for wood


A two-pack polyurethane primer for wood with excellent sealing properties. It’s deep penetration makes the surface highly impermeable and hard. This product is recommended for use mainly on new or stripped wood.

When correctly applied in a single coat it does not form a film but penetrates into the surface. In colourless version it does not alter the original colour of the wood and does not yellow with age.

This product can be painted over with a wide range of products such as Eurogel, Epoway, Resina 2000, Ticoprene, Timber Gloss, Wood Gloss, Wood Mat.

Theoretical coverage (m²/ LT): 12,5

For further information please visit Veneziani’s website.

 

Technical data sheet (TDS)

Gelshield 200 – Antiosmosis treatment

 

A quick drying, high performance, two-component epoxy for application to sound gelcoats to help protect against osmosis.

Gelshield is provided in two shades (green and grey) to ensure complete coverage by alternating coats.

Suitable for use in temperatures down to 5°C. Area Above and below the waterline.

Theoretical coverage (m²/ LT): 8,1

Thinner: No. 7

 

For further information visit International’s website.

Gummipaint – Enamel for dinghies


Suitable for painting neoprene, rubber fabric, PVC, Hypalon, etc. This product has excellent levelling and flexibility while at the same time maintaining maximum adherence. Gummipaint is highly resistant to the marine environment, to immersion in salt and fresh water and to ultraviolet rays.

Theoretical coverage (m²/ LT): 3,8

Thinner: 6380

For further information please visit Veneziani’s website.

Technical data sheet:

 

Gummipaint A/F

Gummipaint A/F is a flexible reef color for inflatable boats. This reef paint is very effective due to the perfect flexibility and adhesion, suitable for neoprene, elastic fabric, PVC, Hypalon, and more.

Theoretical coverage (m²/LT): 15

Recommended thinner: 6380

For more information please visit Veneziani’s website.

Metal primer Velox

 

Adhesion primer for metal. It adheres perfectly on stainless steel, bronze and aluminium.

Only one coat must be applied.

Roughen well the surface before application, sanding it with coarse sandpaper.

For further information please visit Marlin Yacht Paint’s website.

 

Micron 350 – Antifouling

 

Micron 350 is a premium antifouling, offering outstanding 2-year protection in all conditions. A new formulation ensures truer colours, while Self-Polishing Copolymer technology delivers consistent performance.

Theoretical coverage (m²/ LT): 9

Thinner: No. 3

 

For further information visit International’s website.

Polygoal – Primer


Polygoal is a two-pack, high-build polyacrylic undercoat with excellent performance. Easy to sand and therefore especially suitable as undercoat for top grade enamels. Since it is high-build, even one coat is helpful to cover possible micro-porosities of the substrate.

It can be applied to previously sanded epoxy primers or fillers and also directly to properly sanded GRP or gel-coat. Polygoal is an excellent undercoat which enhances the gloss of polyurethane finishes.

Theoretical coverage (m²/ LT): 6,5

Thinner: 6780

For further information please visit Veneziani’s website.

Primocon – Primer

 

Primocon is a fast drying, one-part primer for use below the water line before antifouling is applied.

Formulated for timber, steel, aluminium, cast iron keels and lead keels.

 

Theoretical coverage (m²/ LT): 7.4

Thinner: No. 3

 

For further information visit International’s website.

Propeller A/F

Propeller A/F is a reef paint developed specifically for the protection of propellers, axles, stern drives, rear wings and other parts where greater traction and abrasion resistance are required. It does not contain copper, tin or other metals, providing a perfect fit and protection. Must be used with Propeller Primer.

Theoretical coverage per layer (m² / LT): 7.5

Recommended thinner: 6470

 For further information please visit Veneziani’s website.

Propeller antifouling Velox Plus

 

Special antifouling paint for propellers, stern drives, shafts and other underwater metallic parts. It provides outstanding  adhesion and efficacy.

Resistant to galvanic currents, that are the main responsible of film detachments.

Do not apply on other antifoulings.

It is not necessary to use a solvent for the application.

For further information please visit Marlin Yacht Paint’s website.

Application guide:

Propeller primer

A one-pack primer for Propeller antifouling, based on synthetic resins, which adheres well to metal and alloys in general.
Especially formulated to provide the adhesion of the antifouling Propeller, it can be used for all underwater metal parts which need to be protected against fouling such as propellers, shafts, flaps, etc. An improved primer which is quick drying, has good anti corrosion properties and is easy to use.

Theoretical coverage (m²/ LT): 16

For further information please visit Veneziani’s website.

Rust primer

Rust Primer is an alkyd primer for final one-component paints.
Effective on all properly prepared surfaces, it offers high levels of antioxidant protection.

Recommended thinner: LS701

Showing 1–24 of 64 results

X