1 component enamel Top Side / Bootoping Deck
Recommended thinner: LS701
1 component finish Unigloss
One-pack high quality enamel
- Good flexibility and adhesion on a wide range of primers and finishes
- Not applicable directly on galvanized primers
- Available in various colours
- Not suitable for continuous immersion
Theoretical coverage (m²/ LT): 13,5
Recommended thinner: 6470
1 component Yacht enamel
Recommended thinner: LS701
2 component P/U enamel
Recommended thinner: LS745
2-pack polyurethane finish Gel Gloss Pro
A high quality enamel with excellent resistance to marine and industrial environment, to ageing and to ultraviolet rays.
Does not yellow, is very flexible and retains its gloss. Excellent levelling gives improved aesthetic appearance to topsides, decks, superstructures etc. Gel Gloss Pro can be applied directly to gel coats or to epoxy or polyurethane primers (Epoply,Polygoal).
A wide range of colours, which can be blended, is available.
Not suitable for continuous water immersion.
Theoretical coverage (m²/ LT): 13,5
Recommended thinner: 6700 / 6780
For more information please visit Veneziani’s website.
Technical data sheet (TDS):
645
Pro 018
Pro 035
Pro 112
Pro 378
Pro 411
Technical data sheet (TDS):
Pro 519
Pro 664
Pro 708
Pro 715
Pro 762
Pro Catalyst
291i SIKA Multifunctional adhesive sealant for marine applications
Sikaflex®-291i is a non-sag 1-component polyurethane sealant specifically developed for the marine market, which cures on exposure to atmospheric moisture. Sikaflex®-291i meets in addition the low spread of flame requirements set out by the International Maritime Organisation (IMO).
- Wheelmark approved
- 1-component formulation
- Highly elastic
- Low odour
- Non-corrosive
- Can be painted
- Bonds well to a wide variety of marine substrates
- Solvent free
- Very low VOC
- Low isocyanate content
3-strand high tenacity mooring rope – White
High tenacity 3-strand polyester, non floating mooring rope.
With distinctive red stripe that differentiates it from the medium tenacity
Ideal for mooring due to easy splicing
Approximate packing measures +/- 5%.
3-strand medium tenacity mooring rope – White
Medium tenacity, 3-strand, polyester, non floating mooring rope.
Ideal for mooring due to easy splicing
Approximate packing measures +/- 5%.
Adherpox – Primer
Modified two-pack epoxy primer suitable for boat-hulls but also recommended for topsides and superstructures. Adherpox has been formulated for all types of boat building materials (aluminium included). If several coats are applied, this primer provides good corrosion protection. Thanks to its high solids by volume Adherpox complies with VOC-regulations.
A special feature of Adherpox is its extended recoating interval: 3 months when recoated with antifoulings and 6 months when recoated with an additional coat of Adherpox, without sanding.
Theoretical coverage (m²/ LT): 11
Thinner: 6610
For further information please visit Veneziani’s website.
Technical data sheet(TDS)
Adhesive sealant 291i SIKA
Sikaflex®-291i is a non-sag 1-component polyurethane sealant specifically developed for
the marine market, which cures on exposure
to atmospheric moisture.
- 1-component formulation
- Highly elastic
- Low odour
- Non-corrosive
- Can be painted
- Bonds well to a wide variety of marine substrates
- Solvent free
Technical data sheet (TDS)
Aluminium bimini top with 2 arms
Inflatable boat bimini tent with 2 arms.
Tube Ø20mm anodised aluminium and white polyester fabric.
Supplied with cover and mounting screws.
Aluminium bimini top with 3 arms
Inflatable boat bimini tent with 3 arms.
Tube Ø20mm anodised aluminium and white polyester fabric.
Supplied with cover and mounting screws.
Aluminum bimini top with 4 arms
Inflatable boat bimini tent with 4 arms.
Tube Ø20mm anodised aluminium and white polyester fabric.
Supplied with cover and mounting screws.
Aluminum folding table
Folding table made of anodized aluminum tube with an outer diameter of 25mm and stainless steel fittings.
The top is made of high quality white melamine. Waterproof for use in the marine environment, the edge is sealed with anodized aluminum profile that prevents the ingress of moisture.
Ammeter
High precision engine instruments.
Each instrument is featuring a thread and a locknut that make them easy to install.
Body made of ABS, with backlight.
Water resistance: front IP67 / inner IP65
Antifouling Regatta A/F Speed
Regatta A/F Speed is a high quality hard antifouling paint that meets all applicable environmental standards. It is an antifouling paint that is addressed to yachts whose speed exceeds 30 miles per hour. It is the ideal choice for speedboats. It can be applied on all types of boats, plastic, wood, metal and even on aluminum surfaces, always with the prior application of the appropriate primer per case.
Thinner: LS703
Antifouling Regatta Οptima
Regatta Optima is a high quality self-cleaning reef paint. It is a product that incorporates the latest technologies in the manufacture of reef paints and meets all applicable environmental standards. It is a color aimed at yachts whose maximum speed does not exceed 30 miles per hour.
It is an ideal choice for sailing and cruiser boats. It can be applied on all types of boats, plastic, wood, metal and even on aluminum surfaces, always with the prior application of the appropriate primer per case.
Recommended thinner: LS703
Antifouling spray paint Osculati
Antifouling spray paint Osculati for stern drives and propellers.
Attwood deck shower system
Install flush in the transom or under the gunwale. Includes hinged cover and replaceable sprayer head.
Fixtures are corrosion-resistant. Housing and cover are made of high-impact, UV resistant, engineering-grade plastic and are pre-drilled for six #8 fasteners.
Comes with 6’ hose, shut-off and hot/cold mixing controls. Connects to freshwater system for showering.
Bailer plastic
Plastic bailer for removing accumulated water inside the boat.
Bib-trousers white DISPAN
Lightweight bib-trousers suitable for food processing with adjustable elastic straps.
Fabric: PVC / Polyester 330gr/m², resistant to vegetable and animal fats.
CE approved
Bilge paint Epifanes
Epifanes Bilge paint is a protecting paint based on modified alkyd resin for use in bilge spaces, engine rooms, etc. where a tough paint system is required. Can be applied over most substrates with one-component primer systems.
Application:
- Fiberglass, steel, wood, aluminum
- Bilges, chain lockers and other wet areas in conjunction with the appropriate primer system
Recommended thinner: Brush thinner for Paint & Varnish Epifanes (SKU: 39-0050, 39-0051)
Theoretical coverage 3-5m²/750ml
Bimini top replacement canvas
- 14-0065: Replacement canvas for aluminium bimini top 2 arms 175cm.
- 14-0066: Replacement canvas for aluminium bimini top 2 arms 200cm.
- 14-0067: Replacement canvas for aluminium bimini top 3 arms 200cm.
- 14-0068: Replacement canvas for aluminium bimini top 3 arms 225cm.
Bow fender
The fender can be used as bow protection from the anchor on sailing boats.
Bracket mount compass
White bracket mount compass graduated every 5° with blue conical card.
Bracket-mount compass Offshore 75 Plastimo
The broad and sturdy bracket base absorbs the vibrations. Mounting can be done on any surface, whatever the angle, provided that the compass & card unit remains horizontal at all times. Bracket-mount compass can also be removed when fitted with clip-plate.
Approval: ISO 613 compliant
For more information please click here.
Bracket-mount compass Offshore 95 Plastimo
Broad and sturdy bracket base absorbs vibrations. Mounting can be done whatever the angle, provided that the compass and card unit remain horizontal at all times. Bracket-mount compass can also be removed when fitted with clip-plate.
• All parts fully UV-ray treated.
• Scratch resistant dome.
Approval: ISO 613 compliant
For more information please click here.
Braided cord – solid color – White
Very high strength polyester cord.
Suitable for fishing as well as for various on board tasks such as flag pole rope or outboard engine starter cord
Braided rope – solid color
Polyester, 24-strand, braided rope.
Non floating, general purpose, suitable for all light duty tasks on and off board
Approximate packing measuring + / – 5%
Brush heads T-Brite
Soft wood brush head with a rubber bumper to prevent damage to the boat. High quality brush heads that are designed to stand up to everyday use.
- Fits the T-Brite telescopic handle (22-0257)
Available in:
- Blue: Extra-soft blue bristles are suitable for cleaning glass and removing dust and light debris
- Yellow: Soft yellow bristles are suitable for applying soap and general boat washing
- White: Stiff white bristles are suitable for removing difficult stains
- Orange: Medium stiffness orange bristles are suitable for removing soap and stains
These brush heads also fit the Shurhold range of handles.
Cabin light TMC
Cabin light TMC white with switch 12V, with bulb 1 x 4W.
Ceiling light LED TMC
Ceiling light TMC with switch 12V, with fluorescent bulb 1 x 8W and 2 x 8W.
Ceiling light tilting 180° with LED and switch TREM
Manufactured in ABS. Tilting 180°.
Can be fitted in any position. With switch.
Ceramite Yachting
A high-build, odourless epoxy paint which is solvent-free for the internal and external treatment of any surfaces which need to be sealed, such as water tanks, galleys and cool boxes. Used in antiosmosis systems as a sealant for bilge, fore and aft peaks and hidden internal surfaces.
This product is also suitable for use on wood and steel and has a high chemical resistance to fresh and salt water, diesel, oil, and acidic and basic solutions. Ceramite Yachting is easily cleaned with an ordinary liquid detergent as it has a hard, glossy surface.
Theoretical coverage (m²/ LT): 6,7
For further information please visit Veneziani’s website.
Technical data sheet (TDS)
Cloth repair duct tape 6200 ΗΡΧ
- Very strong, universal, high quality cloth tape with high adhesive strength
- Suitable for securing and repairing pipes, tubes, garden hoses, etc.
- Hand tearable
- Waterproof and weather resistant
Coaxial black speakers
Stereo 2-way speaker coaxial with high acoustic quality.
Low magnetic impedence, to prevent compass and instrument interference.
Supplied with stainless steel coated adjustable bracket.
Construction adhesive MSR Bostik
Adhesive specially designed for marine applications such as all kinds of welding and sealing on boats and ships. It has excellent adhesion to various materials. Ideal for welding without the use of primer of various materials such as: Fiberglass, wood, metal, epoxy, glass etc. With long-term resistance to adverse conditions, salt water, UV radiation, temperatures from -40°C to +100°C.
It can be painted with almost all paints and varnishes, about 30 minutes after application, without affecting the coagulation of the material or the drying of the paint.
Cooler Marine IGLOO
Portable refrigerator MARINE by Igloo from the specially designed series for boats. It has a special plastic resistant to stains and odors, Ultratherm insulation while the UV inhibitors on the lid and the body guarantee the protection of the refrigerator from the sun radiation. Ideal for fishing, storing food and keeping ice.
Cooler Marine Polar IGLOO
Portable cooler Polar with Ultratherm® insulation on the body and lid. With special inner plastic, resistant to stains and odors. With UV inhibitors on the lid and body for protection from sunlight.
Dual snap-fit latches keep contents secure during transportation.Threaded drain plug for optional hose hook up for easy draining. Retains ice for up to 5 days.
Cooler Marine Ultra IGLOO
Featuring a full suite of marine-grade features, from UV protection to rust-proof stainless-steel hardware, this fishing-ready 48-quart cooler is built to withstand the harsh, wet environments of life on a boat, keeping drinks and snacks (or the catch of the day) cold and fresh.
Features:
- UV protection shields from sun damage
- Indestructible rust-resistant stainless-steel screws and lid strap
- Marine-grade, extended-life hinges stand up to the abuse of water environments
- Non-slip, comfort-grip handles for easy transport
- Fish-measuring ruler molded into lid tells you if you should keep it or throw it back
- Ultratherm® insulated lid provides extended ice retention and maximum cooling performance
- Recessed, triple-snap drain plug is leak resistant and allows you to easily drain melted ice
Cover for speed boats
Speed boat cover.
Manufactured from treated, high quality polyester fabric 300D.
Waterproof and very resilient to weather conditions, salt water and solar radiation.
Integrated rope peripherally for drawstring closure and 10 “D” rings for fastening
Cover of open boat
Traditional wooden or polyester open type boat cover.
Manufactured from treated, high quality polyester fabric 300D.
Waterproof and very resilient to weather conditions, salt water and solar radiation.
Integrated rope peripherally for drawstring closure
Cupron Plus – Antifouling
Ablative antifouling that is the result of a formulistic evolution guaranteeing an adequate seasonal protection and a universal application on every type of vessel and support.
In order to guarantee a good performance for the season, it is necessary to apply 2 coats of product.
This antifouling is compatible with most undercoats such as Ticoprene and Unikote Pro.
All colours are suitable for aluminium hulls.
Theoretical coverage (m²/ LT): 9
Thinner: 6610
For further information please visit Veneziani’s website.
Technical data sheet (TDS)
Dacron fishing cord
Dacron braided cords. Very strong for use on deep sea fishing machines.
Dacron fishing cord – Livorno
Dacron fishing cord.
White color with blue insert. Very strong, suitable for all kinds of fishing technics
Danboline – Top coat for bilges
Danboline protects bilges, lockers and bulkheads against moisture penetration, and wear and tear.
Danboline will resist oil and fuel spillage and cleans easily.
Theoretical coverage (m²/ LT): 11
Thinner: No. 1
Deck brushes 6″ Shurhold
These 6 inch (15 cm) deck brushes come in five textures and are compatible with any Shurhold handle.
Each brush is carved out of a solid wood block and has a rubber wrap around bumper to prevent marking the surface.
Available in four textures:
-
- Stiff (950) white polypropylene bristles for teak, below the water line and other tough surfaces
- Medium (955) yellow polystyrene bristles for textured and non-skid surfaces
- Soft (960) yellow polystyrene bristles with split end fibers, safe on gelcoat, clear coat, fiberglass and paint
- Extra Soft (970) blue nylon bristles ideal for delicate surfaces like glass and plexiglas
- Combo (965) red polystyrene bristles with split end fibers, safe on gelcoat, clear coat, fiberglass and paint with shorter medium stiff yellow polystyrene bristles for textured and non-skid surfaces in the center. The harder you push the harder it works.
Deck ventilator solar power
Solar ventilator with plastic cover.
Without built-in battery.
Operates very quietly.
We recommend sealing with Sikaflex.
Double braided rope – Solid color White
Double braided, 32-strand, polyester rope.
Higher strength than the single braided.
Non floating, general purpose, is suitable for all light & medium duty tasks on and off board
Approximate packing measuring + / – 5%
Double brush white
Double brush with soft white hair and plastic handle.
Suitable for final colors and varnishes.
Double sided mounting tape ΗΡΧ
- Double sided mounting tape
- Especially suitable for fitting mirrors, hooks, cable ducts, etc.
- For indoor and outdoor use
- Suitable substrates are glass, wood, metal and plastics
- For each kilo of mirror weight, it is recommended to use 65 cm² of tape
Technical data sheet (TDS)
Ecoplast – Epoxy coating
Epoxy coating for internal use where there is contact with foodstuffs. Recommended for the treatment of iceboxes, cool boxes, galleys and drinking water containers. This product is certified for use with foodstuffs, in particular drinking water, fresh and refrigerated fish, molluscs, crustaceans, etc. Ecoplast is an odourless, solvent-free product which is easy to apply even in confined areas. This product is a sealant and a barrier paint with a high resistance to chemical agents. Ecoplast conforms to D.M.21/3/1973 (concerning hygiene in packaging, containers and utensils intended to come into contact with foodstuffs) and DM 06/04/2004 n.174 (concerning materials and equipment used in facilities for the containment, treatment, conveyance and distribution of drinking water for human use).
Theoretical coverage (m²/ LT): 6,5
Recommended thinner: (for cleaning only) 6610
For further information please visit Veneziani’s website.
Technical data sheet (TDS)
Epoway – Epoxy primer
Two-pack epoxy undercoat with barrier effect, which can be applied to any kind of substrate (wood, steel, aluminium and GRP). This coating may be used both as barrier coat and as undercoat for enamels.
Can be recoated, after sanding, with two-pack enamels.
Theoretical coverage (m²/ LT): 5
Recommended thinner: 6610
For further information please visit Veneziani’s website.
Technical data sheet (TDS)
Epoxy primer Regatta
EPOXY PRIMER is a 2-component epoxy primer. Provides increased protection both below and above the waterline. Under the waterline it also provides anti-osmotic protection. It can also be used as a base for one or two-component anti-fouling paints. Above the waterline it is an ideal base for 2-component top coats as well as 1 component.
Available in shades of light beige and white.
It is suitable for all types of surfaces, plastic, metal, wood and aluminum.
Recommended thinner: N77
Eurogel – Primer 1 component
White one-pack alkyd undercoat. Easy to apply, has good hiding power and can be used as a mat finish for interiors or as undercoat for alkyd painting systems. Can be applied to aged one-pack alkyd systems and wood after sanding as well as to disc-sanded steel substrates.
Theoretical coverage per coat (m²/ LT): 13,5
For further information please visit Veneziani’s website here.
Eurosprint Next – Antifouling
Hard-matrix antifouling paint with high copper content to ensure excellent protection. Eurosprint is an antifouling suitable for antifouling protection in sea water, brackish water and fresh water.
A hard antifouling, with good abrasion resistance, Eurosprint is recommended for sail boats and fast motor boats (also faster than 35 knots). Can be used for boats made of wood, steel or GRP.
Only the white Eurosprint is suitable for aluminium boats.
Theoretical coverage (m²/ LT): 10
Recommended thinner: 6470
For more information please visit Veneziani’s website.
Safety data sheet (SDS)
Black
White
Deep Blue
Technical data sheet (TDS):
Fastening clips for LED light strips
Plastic fastening clips for LED light strips.
Each pack contains 6 clips.