Sikaflex®-291i is a non-sag 1-component polyurethane sealant specifically developed for the marine market, which cures on exposure to atmospheric moisture. Sikaflex®-291i meets in addition the low spread of flame requirements set out by the International Maritime Organisation (IMO).
Pu adhesive D4 category.
H κόλλα Carmyfix CM-233 είναι κατάλληλη για φουσκωτά από Hypalon & Neopren. Ισχυρή διάφανη κόλλα νεοπρενίου (ψυχρής κόλλησης), με βάση συνθετικό λάστιχο (νεοπρένιο) και συνθετικές ρητίνες. Είναι κατάλληλη για την συγκόλληση δέρματος, υφάσματος, ελαστικού, EVA και φυσικού ελαστικού. Κατάλληλη και για συγκολλήσεις υφασμάτων φουσκωτών σκαφών (υφάσματα neoprene & hypalon).
Η προσθήκη του σκληρυντικού Carmydur (3-5%) αυξάνει την συγκολλητική ισχύ και την αντίσταση στην θερμότητα. Χάρη στα ειδικά χημικά η στεγνή κόλλα παρουσιάζει εξαιρετική αντοχή στο κιτρίνισμα από τον ήλιο. Η τελική σκλήρυνση γίνεται σε θερμοκρασία δωματίου.
H μέγιστη δυνατή συγκόλληση επιτυγχάνεται μετά από 48 ώρες.
Technical data sheet (TDS):
A structural adhesive designed for general purpose bonding of a wide variety of material such as hard and soft plastics to specified surfaces. Forms a tough, durable bond to most plastics, composites, ceramics, wood in any combination.
Fast curing product with gelling of mixed adhesive in 5-6 minutes and fixturing in 9-10 minutes.
NOTE: Will not bond most polyethylene or polypropylene plastics.
Bonds hard and soft plastics to specified surfaces. Requires no primers, sets in five minutes at room temperature. Cream appearance. Gap filling to 0.125 inch.
Water resistant and good chemical resistance.
Temperature range -51°C to 121°C. Permanent strength up to 3500 PSI.
Sikaflex®-291i is a non-sag 1-component polyurethane sealant specifically developed for
the marine market, which cures on exposure
to atmospheric moisture.
Technical data sheet (TDS)
Bedding Compound is a 1-component, permanently elastic, fast curing adhesive/sealant, based on Silyl Modified Polymer (SMP). MSR Bedding Compound has been tested and certified to the International Maritime Organisation Fire Test Procedures for Surface Flammability, resolution A.653 (16) and has been approved for use in wall, ceiling and floor applications. Simson MSR Bedding Compound
Το ιδιαίτερο χαρακτηριστικό του είναι ότι ηχομονώνει και απορροφά τους κραδασμούς από το κατάστρωμα του σκάφους.
Adhesive specially designed for marine applications such as all kinds of welding and sealing on boats and ships. It has excellent adhesion to various materials. Ideal for welding without the use of primer of various materials such as: Fiberglass, wood, metal, epoxy, glass etc. With long-term resistance to adverse conditions, salt water, UV radiation, temperatures from -40°C to +100°C.
It can be painted with almost all paints and varnishes, about 30 minutes after application, without affecting the coagulation of the material or the drying of the paint.
An epoxy filler of the latest generation, formulated to provide homogeneous consistency and avoidance of air bubbles during application. Epomast Evo is easy to apply and to sand and – after curing – provides excellent mechanical properties such as flexibility and good resistance to compression. Suitable for application on boats made of steel, aluminium, GRP and wood.
Epomast Evo can be used also for levelling deeper surface defects, when applied with several passes. Suitable for filling both areas above and below the waterline. Can be used also – owing to its creamy consistency and fine grain – as a knifing filler for the application of finishing paints..
Theoretical coverage (m²/ LT): 1
For further information please visit Veneziani’s website.
Technical data sheet (TDS)
Extremely easy to use 2 components epoxy putty of high resistance to temperature and humidity.
High-strength two-pack epoxy filler with great mechanical resistence. Excellent adherence to any type of surface and to epoxy primers. Highly resistant to water.
Epomast can be used to make joints and can be used to repair heavily damaged surfaces.
Thicknesses of up to 10mm can be reconstructed using a spatula and Epomast can be applied directly to wood, GRP, previously disc-ground steel and aluminum.
Theoretical coverage (m²/ LT): 1
For more information please visit Veneziani’s website.
Technical data sheet (TDS):
2-component moldable putties presented in a stick, which react when mixed.
Indicated to repair, rebuild, fill, fix and seal all kinds of materials permanently.
It is a super resistant glue putty indicated for fixing, sealing, filling, creating and rebuilding a multitude of materials and home repairs.
It is easy to mold, it hardens like steel, creating super resistant surfaces. Once hardened, it can be sanded, polished, painted and varnished.
Heat resistant up to + 120ºC.
Fiberglass putty for the filling of small holes and repair of rusty spots. Especially suitable for repair of boats and caravans made out of polyester.
Works as a filler, adhesive and sealant all in one application. Fast curing, elastic and heat resistant. Overpaintable with all usual coating systems.
Has unique filling properties, which allow it to be applied in thick layers for repairs of deep damages and even rust-through spots.
Two-pack, fast drying, high resistance epoxy filler designed for final profiling and small repairs. Can be applied up to a thickness of 1 cm with one single-pass. Epomast Rapido can be applied to any kind of substrate after the application of a suitable primer.
Can be applied onto Epomast Pro or to suitable epoxy undercoats both on below and above waterline areas. For best results, prior to the application of a topcoat, a suitable barriercoat or undercoat are recommended.
Easy to sand in a short time, both dry and wet conditions.
Theoretical coverage (m²/ LT): 1
For more information please visit Veneziani’s website.
Technical data sheet (TDS):
Restores original surface finish to boat hulls and glassfibre panels.
Repairs:
Surfaces:
Once set hard is waterproof and may be overpainted if required.
Ηigh-resistanc two component white gel coat filler.
Can be used like a regular filler to be knifed out: the final result is a bright white finish restoring the original chipped, scratched or dented gelcoat surface.
It can be coated.
Repairs Plastimo GRP Paste
Two-part, glassfibre reinforced polyester paste. Suitable for repairing holes and gaps, deep gouges in glassfibre,aluminium,steel and wood.
Can also be used on corroded iron sheets.
Transparent hardener suitable for CM 233 and CM 888 adhesives. It is added in a ratio of 3-5% to polyurethane and polychloroprene adhesives.
Increases the resistance of the adhesive to temperature, resistance to solvents and the strength of the weld.
High quality rubber adhesive. Ideal for very strong welding. Resistant to humidity and high temperatures.
Surfaces must be clean and dry. Shake well before use. Apply well evenly on surfaces.
High temp red gasket maker was formulated to handle heavy duty applications and extreme temperature conditions (-54°C to 343°C)
Not recommended for use on head gaskets or parts in contact with gasoline.