Danboline – Top coat for bilges
Danboline protects bilges, lockers and bulkheads against moisture penetration, and wear and tear.
Danboline will resist oil and fuel spillage and cleans easily.
Theoretical coverage (m²/ LT): 11
Thinner: No. 1
Gelshield 200 – Antiosmosis treatment
A quick drying, high performance, two-component epoxy for application to sound gelcoats to help protect against osmosis.
Gelshield is provided in two shades (green and grey) to ensure complete coverage by alternating coats.
Suitable for use in temperatures down to 5°C. Area Above and below the waterline.
Theoretical coverage (m²/ LT): 9,1
Thinner: No. 7
Interdeck – Slip-resistant deck paint
A tough, slip resistant deck paint that protects the surface from every day wear and tear.
It’s easy to apply with brush or roller, comes in a range of colors and its low sheen finish helps prevent sunlight from reflecting off decks
Can be applied on: Aluminium / Zinc-Galvanised Steel, GRP / FRP, steel or wood
Theoretical coverage (m²/ LT): 10
Thinner: No. 1
For further information please visit International’s official website.
Technical Data Sheet(TDS):
Interprotect – Primer 2 components
Interprotect is a high performance two pack primer/undercoat. It’s perfectly formulated for polyester, vinylester, epoxy, steel, aluminum, and timber hulls, above and below the waterline.
Quick drying, easy to apply epoxy primer for high performance protection. Excellent anticorrosive protection and good abrasion resistance.
Interprotect can be used on all suitably prepared substrates and epoxy primers.
Suitable for stainless steel trim tabs and stern drive gear, but it should not be used over any one pack products nor for use on bronze or mixed alloy propellers.
Theoretical coverage (m²/ LT): 9.1 m²/L
Recommended thinner: No. 7
Micron 350 – Antifouling
Micron 350 is a premium antifouling, offering outstanding 2-year protection in all conditions. A new formulation ensures truer colours, while Self-Polishing Copolymer technology delivers consistent performance.
Theoretical coverage (m²/ LT): 9
Thinner: No. 3
Primocon – Primer
Primocon is a fast drying, one-part primer for use below the water line before antifouling is applied.
Formulated for timber, steel, aluminium, cast iron keels and lead keels.
Theoretical coverage (m²/ LT): 7.4
Thinner: No. 3
Thinner No. 1 – for one-part paints and varnishes
For use above the waterline, Thinner No.1 is a very good, general purpose thinner that’s designed to be used with one-part paints (excluding antifoulings) and varnishes.
Thinner No. 3 – for antifouling paints
Thinner No.3 is suitable for antifouling paints (except for VC® products), bottom coatings and other special paints.
It’s also used to help spray on one-part varnishes and finishes.
Thinner No. 7 – for epoxy paints
Thinner No.7 has been specially formulated for thinning epoxy type products including Interprotect® and Gelshield® 200.
It can also be used for equipment cleaning in association with Interfill 830, Interfill 833 and Watertite.
Thinner No. 9 – for polyurethane 2 components
Thinner No.9 is a very effective thinner for use with two-component polyurethane products or for cleaning application equipment.
Trilux 33 – Antifouling
A premium antifouling for use on aluminium craft, Trilux 33 contains Biolux® for extra antifouling protection.
Such strength makes it suitable for boats in all waters.
Theoretical coverage (m²/ LT): 8,3
Thinner: No. 3
Ultra 300 A/F – Antifouling
Highly effective, powerful antifouling with effective protection from organisms such as algae.
Suitable for professional and non-professional use on ships in fresh and salt water. The hard, abrasion resistant surface provides protection for up to one year.
Theoretical coverage (m²/ LT): 9
Thinner: only for cleaning No. 3
VC 17m Extra Graphite – Antifouling
The VC 17m Extra is a tough high-performance antifouling with a fluorine microadditive that gives the hull a smooth, low-friction surface for maximum speed and efficiency, making it the ideal choice for racing sailboats and speedboats. It’s self-leveling providing a smooth finish without the need for sanding.
It dries very quickly and allows you to paint and launch on the same day. It forms only a thin film, so over time there is minimal concentration of paint.
Suitable for use (with recommended primers) on GRP, steel and lead surfaces.
Theoretical coverage (m²/ LT): 11
Recommended thinner: No. VC General Thinner
VC Offshore – Antifouling
VC Offshore EU is a hard antifouling suitable for professional and consumer application onto vessels in fresh and salt water. Easy application with no sanding between coats. Quick drying for rapid overcoating and flexible launch times.
The smooth film provides a hard finish for increased speed and efficiency.
Ideal for racing sailors and powerboats.
Compatible with GRP, wood, steel/iron, lead after proper primer application.
Not suitable for use over aluminum/ alloy substrates or zinc sprayed surfaces.
Theoretical coverage (m²/ LT): 12
Recommended thinner: No. VC General Thinner
