Pumps

Showing 25–48 of 70 results

Electric gear pump TMC

Self-priming electric gear pump with bronze gear pumping elements inside.

Do not use where flammable vapor are present.

Electromagnetic pump with pulley Ø150

Water transfer electromagnetic pump with flexible impeller. Operates via transition belt attached on the engine.

Electronic automatic switch 20Α Johnson

 

Electronic automatic switch will not corrode and is not affected by oil or foreign debris.

  • No moving parts, totally sealed solid state electronics and field detectors
  • Environmentally sensitive; no mercury
  • No exposed sensors eliminate corrosion possibilities
  • Activates at a 50 mm (2″) fluid level and deactivates at a 20 mm (¾”) fluid level
  • A three second delay prevents false starts from water sloshing in the bilge
  • Ultima Switch is rated to handle pumps up to 20A at 12V.

Filter – pump strainer plastic TMC

 
These filters protect all electric diaphragm pumps from pump breakdown due to particles in the water.

The clear cap can be removed for easy cleaning of the mesh strainer inside.

Float switch automatic Shurflo

 

The Shurflo® series float switches provide the ultimate in reliability for your boat. Complete line includes a standard automatic float switch and a caged automatic float switch.

  • 3’ Tinned Wire Assembly
  • Non-Mercury
  • Remote or Direct Mounting
  • Ignition Protected

 

Float switch Rule

A standard bilge pump operates by a control switch that senses water and activates the pump. Rule’s Float Switches offer outstanding performance.

Extra-large float chambers are used for increased buoyancy and detachable mounting bases that make them easier to install and remove for cleaning and inspection.

All models are suitable for pumps that draw up to 20 amps, except the Model 35 Rule-A-Matic, which is suitable up to 14 amps.

For more information click here.

Foot pump Service kit TMC

Service kit TMC-707RK for diaphragm foot pump TMC-70701, the kit includes diaphragm, valve and joints.

 

Gulper toilet pump BP2552 Whale

 

The Gulper Toilet Pump BP2552 is designed to manage unmacerated toilet waste, and is ideal for holding tanks and vacuum systems.

  • Pumps unmacerated toilet waste
  • Runs dry without damage
  • Up to 18 ltrs (4.75 US gal) per minute
  • Virtually unblockable
  • Rotatable inlet and outlet- allows you to install in awkward locations
  • Self priming up to 3 m (9.8 ft)-mount the pump  in the most convenient part of boat
  • Pumps a mixture of air and waste
  • Easy to maintain, large single diaphragm

Gusher Galley Pump (foot operated) GP0550 Whale

 

  • Smooth double action
  • Self primes and operates dry without damage
  • Easy, smooth hands free operation
  • Ease of installation- Multi-directional inlet and outlet hose connections
  • 3 mounting options (including thru bulkhead)
  • Left and right oriented foot lever  versions available
  • Also ideally used to prime Whale In-Line Booster pumps
  • Pumps fresh and salt water 15 ltrs (4 gals) per minute

Installation manual:

 

In-line pump TMC

Handy small diameter submersible and in-line pump designed for use in confined spaces.

  • Non-self priming centrifugal pump
  • Light-weighted to suspend in the pipework
  • Sonic-welded submersible unit
  • Intermittent operation design

Macerator pump 18590 Jabsco


Toilet waste macerator pump, grinds raw toilet waste to a uniform slurry for easy transfer and discharge.

Macerator pump TMC


Self-priming toilet waste pump. Combines pre-macerator with impeller pump.

Designed for in-line installation on holding tank pump out or to convert manual vacuum toilets to electric operation.

Do not run dry.

Manual bilge pump BP0350 Whale

 

 

The manual bilge pump BP0350 is ideal for low profile installation underdeck.

  1. Whale’s most slim line design
  2. Includes sleek Whale deck plate with cover
  3. High performance: up to 35 lt / 9.2 US gals per min
  4. Suitable for pumping bilge water, saltwater or diesel

 

Manual bilge pump with hose

Hand- operated bilge pump for pumping water out of inaccessible cavities.

Manual water pump Amazon Jabsco

For mounting on bulkhead, through bulkhead, on deck or through deck (with optional through deck kit). Can be used for waste water drainage and operated from inside or outside.

  • Flow direction reversible by exchanging inlet and outlet ports
  • Quick-release clamp ring for rapid disassembly
  • Optional through-deck kit permits operation from inside or outside cabin
  • Push-fit inlet and outlet elbows (1 supplied with pump) increase flexibility of installation
  • Stainless steel handle with bulkhead clips
  • Self-priming up to 4m

Oil gear pump Marco

 

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft.

Not intended for gasoline, solvents or chemicals.

Pump guard strainer 46400 Jabsco

 

 

Prevents particles jamming valves and causing pump breakdowns.

Transparent screw off housing enabling easy inspection and cleaning of the stainless strainer

Replacement valves for diaphragm pumps TMC

Replacement valves for diaphragm pumps Shower & sink drain pump (TMC-0620911) and Toilet Waste pump (TMC-0620921) TMC.

Service Kit – Ports Kit 29275-1000 Amazon Jabsco

Compatible with Jabsco manual bilge pumps 29270 and bilge pump 59090.

Set includes:

  • #2   x 1 pc
  • #3   x 2 pcs
  • #4   x 2 pcs
  • #18 x 1 pc

Showing 25–48 of 70 results

X