Service Kit clamping ring kit for Gulper 220/320 Whale
Clamping ring kit for holding the diaphragm in place on the Whale Gulper 220 /320 pump.
Service Kit for Amazon Jabsco
Service Kit includes:
- #2 x 1 pc
- #7 x 1 pc
- #12 x 1 pc
- #13 x 1 pc
- #15 x 6 pc
- #17 x 1 pc
- #18 x 1 pc
Service Kit SK880 Shower drain 50880 Jabsco
Jabsco diaphragm bath / bilge drain pump 50880 service kit with diaphragm SK880.
Service Kit SK890 Waste pump 50890 Jabsco
Compatible with Jabsco pump series 50890.
The Service Kit SK890 includes:
1 x cover
1 x diaphragm
4 x hex head screw
1 x screw recessed pan head washer
2 x waste pump joker valve
2 x waste pump port
(parts No. 7, 8, 10, 12, 14, 16, 17 of the exploded view)
Shower & sink drain pump TMC
Single diaphragm pump suitable for extracting water from the showers and washbasins of the boat.
Self-priming pump, can be run dry.
With 360° rotating head.
Shower drain – diaphragm pump 37202 Jabsco
Self-priming shower drain diaphragm pump 37202-2012 Jabsco.
Shower drain – diaphragm pump 50880 Jabsco
Self-priming diaphragm pump 12 Volt DC.
- Robust, quiet single diaphragm design
- No strainer required
- Single diaphragm design allows extended dry running
- Multi-positional ports for easy mounting
Shower Drain / Galley Waste GULPER 320 Whale
No clog, no filter waste pump built on more than a decade of market leading pump technology.
Gulper 320 – the easy access remote mount bilge pump designed to be located high, dry and protected – ideal where bilge space is very limited.
- Ideal where bilge space is limited-smallest footprint strainer
- Head rotates 360 degrees to suit your installation
- High- dry and protected – Remote mounting allows easy access
- Long life- runs dry without damage
- Meets requirement for primary bilge pump for boats up to 12m (39.4ft) length
- Easy to install – including uneven surfaces
- Secure fit -new wrap around mounting feature, only 3 screws to secure
- Reliable operation – Self priming
- Easy maintenance -patented reinforced Ezi-clamp locking ring -simply twist and screw to lock pump head in desired position
Manual:
Shower Drain / Galley Waste GULPER 220 Whale
Gulper valve technoloogy handles shower waste such as hair and gel
No clog, no filter waste pump built on more than a decade of market leading pump technology.
- Up to 14 ltrs (3.7 US gals) per minute
- Will run dry without damage and pump a mixture of air and water
- Specially designed to pump waste water
- Large single diaphragm
- Virtually non-choke valves
- No filter required
- Self-priming up to 3 m (10 ft)
- Easy to install in confined spaces
- Double outlet valve ensuring continuous flow
- Multi directional head
- Can be mounted almost anywhere
- Low power consumption
Please note: Gulper® 220 is not suitable for pumping diesel.
Manual:
Shower sump pump system with Sahara pump Attwood
Attwood’s shower sump systems deliver the performance you’ve been asking for. Offering fast water flow into and out of sump.
The lid snaps in to allow quick installation (and removal for cleaning) and includes a gasket to seal the sump box against overflow. The sump box even includes an air to prevent air locks. Meets or exceeds all applicable of the ABYC and USCG.
Shower sump system Rule
- A compact, full-capacity shower drain system, activated by a non-mercury Rule-a-Matic Plus float switch
- Automatically turns on after the water starts and shuts off when the water is removed
- Removable strainer allows easy cleaning
- Clear screw-down cover
- Integral non-return valve
Switch panel for bilge pumps with alarm
Seaworld switch panel with alarm 12v, with warning light and audible alarm that activates when there is water in the bilge.
Controls pump for automatic or manual operation.
Easy to install.
Tsunami Aerator bilge pump Attwood
- Move more water and oxygen into livewell tanks to keep fish active
- Cooler-running motors, premium materials, watertight seals and waterproof wiring
- Cartridges are replaceable and interchangeable between bilge and aerator pumps
Technical data sheet:
Washdown diaphragm pump Jabsco
Pressure-controlled self-priming washdown diaphragm pump supplied with inlet strainer, port fittings & trigger nozzle.
Waste diaphragm pump 50890 Jabsco
Self-priming diaphragm waste pump 12 volt that handles sink, shower and black waste.
- Self-priming up to 3m (9.5ft) vertical lift
- Multi-positional ports for easy mounting
- Rated for up to 30 minutes continuous running
Waste pump TMC
Single diaphragm pump designed to handle toilet waste water.
Self-priming pump and can be run dry.
Adjustable head that can be rotated 360°.
Water brass pump Garoni
Pump for transferring water, available with or without pulley (17-0029).
Flexible impeller.
Water pressure pump 16.5Lt / 4.3G TMC
Water pressure pump with 4-chamber diaphragm design that can serve up to 3-4 outlets.
- Smooth constant flow
- Built-in check valve to prevent backflow
- Snap-in port fittings included
- Built-in thermal overload protection
- Self-priming & can be run dry
CE Certified
Water pressure pump Par Max Jabsco
- Smooth flow
- Dry running capability
- Soft noise absorbing mounts
- Snap-fit port fittings
- Built-in bypass -less pulsation
- Reduces need for accumulator tank
- Corrosion resistant materials
- CSA listed
- ISO 8846 MARINE (ignition protection)
- CE
Water pump with brass head TMC
External water pump with brass head and flexible impeller.
General purpose pump from pumping water from bilges to deck washing.
CE Certified
ISO 8846 MARINE (Ignition Protection)
Water pump with plastic head TMC
General purpose presure pump with plastic head and flexible impeller.
It’s high capacity, 25lt (6gal) per minute, makes it quite versitile so it can be used from bilge pump to deck washing.
The new desing allows a 25mm (1″) hose to be attached directly to the head.